مواقع التدريسيينجامعة الكوفة
SADDAM KHALSAN KWAIS AL-RAHEEM
Assistant Professor

SADDAM KHALSAN KWAIS AL-RAHEEM

0Publications
0Lectures
0Interests

About

B.Sc. from University of Kufa in mechanical engineering (2004). M.Sc. from University of Basrah in mechanical engineering (applied mechanics) (2012). PhD from University of Basrah in mechanical engineering (applied mechanics) (2022)Lecturer at University of Kufa – College of Engineering Department of Mechanical Engineering since 2012.

Research Interests

5

Publications

14
2025

Characterization of the mechanical properties for mild steel alloyed reinforcement with nanomaterials using powder technology

AuthorsAbbas Ali Diwan, Mohammed Ali Diwan, Saddam K. Al‑Raheem, Ammar Muslim Hadi, Mohammed J. Alshukri
JournalDiscover Materials
Date2025-05-28
Abstract

Powder technology is considered one of the promising technologies that industrial companies have resorted to in the manufacture of mechanical parts in recent years instead of casting processes and traditional manufacturing methods that lead to a large loss of materials and high energy consumption. In this research, the effect of adding nano titanium oxide and nano zinc oxide will be studied separately and in different weight ratios (2%, 4%, 6%, 8% and 10%) on the mechanical properties of mild steel powder. A pressure of 450 MPa is applied to the powder inside the mold and then it is placed in the tube furnace with argon inert gas for annealing at a temperature of 850 °C for four hours were used. Ultimate tensile, compression and Micro Rockwell hardness tests were conducted. Morphological properties of samples were investigated by using a scanning electron microscope and X-ray diffraction spectra were studied for all samples. The results showed that increasing the weight fractions of nanomaterials to the maximum increases the tensile strength, compressive strength and Micro Rockwell hardness by 25%, 18% and 13%, respectively. The scanning electron microscope images (SEM) also showed the presence of cohesion and homogeneity in the crystal structure for all weight ratios of nanomaterials gradually. The X-ray diffraction results also confirmed the presence of new phases formed after the process of mixing mild steel powder with nanomaterials. As a human-friendly material, stainless steel is used in many medical applications to join broken bone fragments in humans and other animals, especially when non-toxic materials such as zinc oxide and nano-titanium oxide are added in appropriate weight ratios.

2025

DeepLearning-AssistedOptimizationforEnd-EffectorPositionandOrientation

AuthorsHazim Albedran, Saddam K. Al-Raheem, and Zainab Shakir Radeef
Journal7th International Conference on Intelligent and Fuzzy Systems, INFUS 2025
Date2025-07-26
Abstract

The inverse location of the end-effector for robotic manipulators, particularly those with more than six degrees of freedom, remains a challenging problem due to the highly nonlinear and often redundant nature of the kinematic equations. This paper introduces a hybrid approach that leverages deep learning as an efficient initial guess generator for solving IK problems, followed by an optimization-based refinement using the Adaptive Exploration Artificial Bee Colony algorithm. Deep learning models were trained to map the end-effector’s desired location to approximate joint configurations. While the neural network achieves reasonable accuracy, challenges like generalization to unseen configurations and handling kinematic singularities persist. To address these, the AEABC algorithm refines the network’s predictions, optimizing them to minimize pose error in Cartesian space. Results illustrate that the hybrid approach significantly improves accuracy compared to standalone deep learning or traditional optimization methods.

2024

Analysis the free vibration of functionally graded material plate by using new displacement function

AuthorsMarwah Ghazi Kareem, Sadiq Emad Sadiq, Saddam K. Al-Raheem, Luay S. Alansari
JournalResults in Engineering
Date2024-12-19
Abstract

This work introduces a new displacement function for the free vibration analysis of functionally graded material (FGM) plates, combining analytical modeling and finite element analysis using ANSYS. The displacement field at the mid-surface is represented by a trigonometric series in the thickness direction. Governing equations are derived via Hamilton’s principle, solved analytically using the Navier technique in MATLAB 2021, and validated through ANSYS simulations. Results show excellent agreement across various power-law indices, thickness ratios, and aspect ratios to verify data within the literature. The findings reveal a reduction in natural and dimensionless frequencies with increasing length-to-thickness ratios and power-law indices. However, when the modulus of the metallic material is greater than that of the ceramic material, the non-dimensional frequencies decrease as the power-law index increases. underscoring the precision and versatility of the proposed methodology for dynamic analyses of FG-plates.

2024

Review of research on the vibration and buckling of functionally graded spherical shells

AuthorsMarwah Ghazi Kareem, Saddam Khalsan Al-Raheem , sadiq emad sadiq, Luay Sadeq Alansari
JournalInternational Journal of Science and Research Archive
Date2024-12-04
Abstract

Spherical shells are important components in many aerospace and engineering structures. A functionally graded material (FGM) spherical shell can have its material distribution varied with the change of the radius direction, which can enhance the bearing capacity and the stability of the thin-walled shells. However, due to the special geometric characteristics of the spherical shell, the simplicity of its geometry will lead to great complexity in its vibration and buckling analysis processes. This paper mainly reviews the previous analytical and numerical research on the vibration and buckling of the FGM spherical shell. The shell's middle plane equilibrium equations are derived from plate theory. The Galerkin method, the Ritz method, the power series solution method, and other methods are introduced to carry out the vibration and buckling analysis. The frequencies, mode shapes, and the critical buckling load of the FGM spherical shells, which are under various boundary conditions and external pressure.

2024

Static deflection of pre-twisted beam subjected to transverse load

AuthorsSaddam K. Al-Raheem, Hayder Zuhair Zainy Aziz D. Almawash Luay S. Alansari Saif W. Mohammed Ali
JournalResults in Engineering
Date2024-02-27
Abstract

In the current research, the static deflection of the pre-twisted beam has been calculated experimentally and numerically using finite element approach (ANSYS workbench 2020R1) and under the effects of different twist angles, different lengths, four boundary conditions of edges support of the beam. The beam was manufactured from PETG filament material by a 3D printer at room temperature. The obtained results showed reasonable acceptance between the experimental and numerical pre-twisted beam deflection. The numerical maximum deflection of the pre-twisted beam decreased with the increase of twisted angle of the beam for clamped-simply and simply-simply edges support. While it was irregularly various for clamped-clamped edge support with a minimum value of the maximum deflection occurred at the twist angle 135o. The maximum deflection of the pretwisted beam is disappeared gradually at the twist angles greater than 270o for claimed-free edge support. In addition, the maximum deflection of the pre-twisted beam increased due to the beam length increment.

2024

Experimental and Numerical Investigation of the Natural Frequency for the Intact and Cracked Laminated Composite Beam

AuthorsRaghad Azeez Neamah, Saddam Khalsan Al-Raheem Emad Kadum Njim Zainab Abboud Luay Sadeq Al-Ansari
JournalJournal of Aerospace Technology and Management
Date2024-08-12
Abstract

In this study, several composite beam samples were made from woven fiberglass and epoxy. The first sample was created using epoxy, whereas the others used epoxy together with fiberglass layers. These samples were used to study, experimentally and numerically, the effect of fiberglass layers on the natural frequency of composite beams. A numerical model was constructed using ANSYS software 17.2 to assess vibration properties for the manufactured samples. The effects of boundary conditions (simply supported, clamped-clamped, and clamped-free), with crack depths (2 mm and 3 mm) and the number of fiberglass layers (0, 1, 2, 3, and 4) were investigated. The results of the experimental and numerical models were compared, and the numerical model was acceptable with an error rate of less than 15%. Crack depth has a significant impact on natural frequency and mode shape; therefore, transverse cracks were created in the upper surfaces of beams to investigate the vibration mode shape and natural frequency.

2022

Dynamic Properties of Rubber Blends (NR/BR.cis) Under the Effect of Different Blending Ratio and Carbon Black Type

AuthorsSaddam K. Al-Raheem, Abdul Kareem F. Hassan Muhsin J. Jweeg
JournalBasrah Journal for Engineering Sciences
Date2022-12-24
Abstract

Due to the wide use of rubber components in different engineering applications such as vibration isolators, engine mounts, car tires, and bridge bearing pads, etc. This rubber component mostly subjected to high levels of vibration and noise which are among the most reasons that lead to the failure of the structures. In the present paper has been performed experimentally to investigate the influences: different content ratios of natural rubber (NR) and polybutadiene (BR.cis) rubber blends [1: (50/50) %, 2: (60/40) %, 3: (70/30) %, 4: (80/20) %, 5: (90/10) %, 6: (100/0) % pphr], and two carbon blacks types (N375, and N220) on the dynamic properties (Rebound Resilience, Damping Time, and Decay Rate). The experimental results showed that the rubber compound that has the blending ratio [1: (50/50) %] has high resilience (low damping), high damping time and high displacement for two carbon black types used in this work. While these properties were improved whenever the rubber blend close to the percentage [5: (90/10) %]. The damping time, amplitude, and resilience of a rubber compound with a blending (90/10) % and carbon black (N220) are decreased by (24.53 %, 36.854 %, and 36.852 %), respectively, compared with a rubber blend that has the blending ratio of (50/50) %.

2021

Investigation of Static Deflection in Internal Stepped Cantilever Beam

AuthorsHusam Jawad Abdulsamad, Kadhum Jassem Wadi‡ Saddam Khalsan Al-Raheem Luay S. Alansari
JournalJournal of Mechanical Engineering Research and Developments
Date2021-09-01
Abstract

In this work, the static deflection of internal stepped cantilever beams with two steps was selected to be investigated by using Finite Element Method (FEM), Classical Rayleigh Method (CRM) and Modified Rayleigh Method (MRM). The static deflection was calculated at two positions, the end of the large thickness part and the free end where the load is applied. The results show that the length of the small thickness part, the large diameter (DL) and the small diameter (DS) are the main factors that affect the static deflection at free end. While the small diameter (DS) has no effect on the static deflection at the point where the inner diameter changes. Finally, the ANSYS and CRM results were close to each other at different conditions and the MRM fails to calculate the static deflection.

2021

Design and Construction of Device for Rubber Material Fatigue Test

AuthorsSaddam K Al-Raheem, Muhsin J Jweeg Abdul kareem F Hassan
JournalIOP Conference Series: Materials Science and Engineering
Date2021-03-08
Abstract

Due to the wide use of rubber components in different engineering applications such as vibration isolators, engine mounts, car tires, and bridge bearing pads, etc., this rubber component is mostly subjected to repeated loads continuously. As a result, these loads will initiate cracks on the outside surface of a component and then, these cracks will grow over time, and then, the growth of the cracks increase leading to a failure of the rubber component. Many researchers have studied the behavior of fatigue under the action of many factors by utilizing many devices. These devices produce repeated loading on the sample made of rubber material, initiating cracks and, then crack growth, which leads to failure. Therefore, in this paper, a modern test device has been developed and constructed to perform laboratory rubber fatigue testing. This device has been proven to be accurate and with the ability of repeatability. Keywords. Natural rubber, Fatigue life, Periodic load, Stress amplitude

2020

Analytical and numerical investigation of the critical thermal buckling load in the fixed – fixed and fixed – pinned uniform and compound columns

AuthorsSaddam Khalsan Al-Raheem, Husam Jawad Abdulsamad Luay S. Al-Ansari Muna H. Altureihi
JournalAustralian Journal of Mechanical Engineering
Date2020-11-26
Abstract

This study represents an investigation of the critical thermal buckling load in columns consist of two different materials for the case of fixed-fixed and fixed pinned loading in order to choose the suitable compound ratio. The finite element model using ANSYS APDL 17.2 was built to simulate the compound column consist of two different materials of different compound column length, different materials and different lengths of the fixed part. Analytically, four analytical models were suggested to describe the effects of moduli of elasticity and thermal expansion factors of the used materials on the critical thermal buckling load. The results showed that the fourth analytical model is the suitable analytical model described the effects of elasticity and thermal expansion factors of the used materials in a fixed – fixed compound column. In fixed – pinned compound column, all analytical models suggested in this work cannot describe the effects of elasticity and thermal expansion factors along the length of the compound column.

2013

Calculating Stress Intensity Factor (Mode I) for Composite Plate with Central Crack

AuthorsLuay S. Al-Ansari, Hashim N. Al-Mahmud Saddam K. Al-Raheem
JournalInternational Journal of Computer Applications
Date2013-08-01
Abstract

A Stress Intensity Factor (SIF) Mode I is calculated for longitudinal composite plate with dimensions (104 mm × 40 mm) and fiber volume fraction (37.5%).The finite element method (FEM) (ANSYS) and MFree method are used for calculating the SIF of quarter model (i.e. (52 mm × 20 mm)) with constant displacement in y- direction that is applied at the ends of the plate. The crack length, material properties of fiber and material properties of matrix affect the SIF and these parameters are studied to understand the crack growth and the fracture mechanism in composite material. The value of SIF depends on the position of crack tip in additional to the material properties of fiber and matrix. A comparison between the FEM and MFree method is made to study the advantages and disadvantages of each method and to choose the suitable method for calculating SIF for composite plate. Generally, there is a good agreement between the FEM and MFree method but there is a slightly difference between them specially when the crack length increases. This slight difference happens due to the calculation technique of SIF used in each method. This difference makes the FEM accurate than the MFree method unless increasing the number of nodes around the crack tip in MFree method.

2012

Studying a Buckling Behavior for Edge Cracked Plates Under Compression

AuthorsNathera Abdual Hassan Saleh, Saddam Kallsan Kuess
JournalEngineering and Technology Journal
Date2012-01-01
Abstract

In this work, the buckling behavior for edge cracked plates under compression loading is studied considering the influence of the crack parameters (i.e. size, location and orientation), plate aspect ratio and plate boundary conditions. The problem was solved numerically using finite element method utilizing ANSYS software version11 .The obtained results show that the crack parameters as well as plate aspect ratio and plate boundary conditions are efficient factors on the buckling coefficient and corresponding nodal patterns of such plates. The useful numerical results for buckling coefficients and corresponding nodal patterns are displayed in figures. According to the author's knowledge about the published literature on the buckling field, there is no specific report on the nodal patterns results of such edge cracked plates.

2024

Review of Phase Change Materials Technique Used to Enhance the Performance of Single Slope Solar Stills for a Solar Water Desalination

AuthorsAngham Fadil Abed, Saddam K. Al-Rahhem Rasha Hayder Hashim
JournalAmerican Journal of Sciences and Engineering Research
Date2024-05-12
Abstract

Clean water is becoming increasingly difficult to come by, particularly for those who live in rural and coastal locations. The water must be treated before use, even for individuals who discover subterranean water. The most effective method for desalinating and purifying muddy water is to use solar thermal energy, which is freely available. The lack of sufficient clean freshwater sources and the abundance of contaminated water that could potentially be turned into drinkable water are the main motivators for this endeavor. Among the many designs on the market, solar stills using phase-change materials seem appealing for thermal applications in secluded and wet environments. One possible method to capture heat and lower losses in solar stills is to employ phase change material (PCM). The review paper's main objective is to investigate the use of PCMs in single slope solar stills to boost distillate yield. We also go over the best PCMs depending on the kind of solar still.

2024

Effect of Nanoparticles and Phase Change Materials in Enhancement of Solar Stills: A Review

AuthorsRasha Hayder Hashim, Muna Hameed Alturaihi Saddam K. Al-Rahhem Angham Fadil Abed
JournalAmerican Journal of Sciences and Engineering Research
Date2024-07-04
Abstract

Clean water is becoming increasingly difficult to come by, particularly for those who live in rural and coastal locations. The water must be treated before use, even for individuals who discover subterranean water. The solar still is a free, environmentally responsible gadget that uses green energy to turn salty water into drinking water. Researchers have tried a number of methods to increase the productivity of solar distillers because their daily output is so low. Owing to their advantageous optical and thermophysical qualities, some researchers have employed the nanoparticles alone or in combination with phase-changing materials. Among other approaches, using nanoparticles and solid particles with a diameter between 1 and 100 nm has been used for the past 20 years. Utilizing nanoparticles alone or in combination with phase change materials in active and passive desalination systems, the current review paper explores which nanoparticles are most appropriate for solar stills. After review, it was discovered that the still's use of nanoparticles and phase change materials enhanced both its daily productivity and efficiency.

Lectures

21
View details