Characterization of the mechanical properties for mild steel alloyed reinforcement with nanomaterials using powder technology
الباحثونAbbas Ali Diwan، Mohammed Ali Diwan, Saddam K. Al‑Raheem, Ammar Muslim Hadi, Mohammed J. Alshukri
المجلةDiscover Materials
التاريخ2025-05-28
مختصر البحثPowder technology is considered one of the promising technologies that industrial companies have resorted to in the
manufacture of mechanical parts in recent years instead of casting processes and traditional manufacturing methods
that lead to a large loss of materials and high energy consumption. In this research, the effect of adding nano titanium
oxide and nano zinc oxide will be studied separately and in different weight ratios (2%, 4%, 6%, 8% and 10%) on the
mechanical properties of mild steel powder. A pressure of 450 MPa is applied to the powder inside the mold and then
it is placed in the tube furnace with argon inert gas for annealing at a temperature of 850 °C for four hours were used.
Ultimate tensile, compression and Micro Rockwell hardness tests were conducted. Morphological properties of samples
were investigated by using a scanning electron microscope and X-ray diffraction spectra were studied for all samples.
The results showed that increasing the weight fractions of nanomaterials to the maximum increases the tensile strength,
compressive strength and Micro Rockwell hardness by 25%, 18% and 13%, respectively. The scanning electron microscope
images (SEM) also showed the presence of cohesion and homogeneity in the crystal structure for all weight ratios
of nanomaterials gradually. The X-ray diffraction results also confirmed the presence of new phases formed after the
process of mixing mild steel powder with nanomaterials. As a human-friendly material, stainless steel is used in many
medical applications to join broken bone fragments in humans and other animals, especially when non-toxic materials
such as zinc oxide and nano-titanium oxide are added in appropriate weight ratios.
DeepLearning-AssistedOptimizationforEnd-EffectorPositionandOrientation
الباحثونHazim Albedran، Saddam K. Al-Raheem, and Zainab Shakir Radeef
المجلة7th International Conference on Intelligent and Fuzzy Systems, INFUS 2025
التاريخ2025-07-26
مختصر البحثThe inverse location of the end-effector for robotic manipulators, particularly those with more than six degrees of freedom, remains a challenging problem due to the highly nonlinear and often redundant nature of the kinematic equations. This paper introduces a hybrid approach that leverages deep learning as an efficient initial guess generator for solving IK problems, followed by an optimization-based refinement using the Adaptive Exploration Artificial Bee Colony algorithm. Deep learning models were trained to map the end-effector’s desired location to approximate joint configurations. While the neural network achieves reasonable accuracy, challenges like generalization to unseen configurations and handling kinematic singularities persist. To address these, the AEABC algorithm refines the network’s predictions, optimizing them to minimize pose error in Cartesian space. Results illustrate that the hybrid approach significantly improves accuracy compared to standalone deep learning or traditional optimization methods.
Analysis the free vibration of functionally graded material plate by using new displacement function
الباحثونMarwah Ghazi Kareem، Sadiq Emad Sadiq, Saddam K. Al-Raheem, Luay S. Alansari
المجلةResults in Engineering
التاريخ2024-12-19
مختصر البحثThis work introduces a new displacement function for the free vibration analysis of functionally graded material
(FGM) plates, combining analytical modeling and finite element analysis using ANSYS. The displacement field at
the mid-surface is represented by a trigonometric series in the thickness direction. Governing equations are
derived via Hamilton’s principle, solved analytically using the Navier technique in MATLAB 2021, and validated
through ANSYS simulations. Results show excellent agreement across various power-law indices, thickness ratios,
and aspect ratios to verify data within the literature. The findings reveal a reduction in natural and
dimensionless frequencies with increasing length-to-thickness ratios and power-law indices. However, when the
modulus of the metallic material is greater than that of the ceramic material, the non-dimensional frequencies
decrease as the power-law index increases. underscoring the precision and versatility of the proposed methodology
for dynamic analyses of FG-plates.
Review of research on the vibration and buckling of functionally graded spherical shells
الباحثونMarwah Ghazi Kareem، Saddam Khalsan Al-Raheem , sadiq emad sadiq, Luay Sadeq Alansari
المجلةInternational Journal of Science and Research Archive
التاريخ2024-12-04
مختصر البحثSpherical shells are important components in many aerospace and engineering structures. A functionally graded material (FGM) spherical shell can have its material distribution varied with the change of the radius direction, which can enhance the bearing capacity and the stability of the thin-walled shells. However, due to the special geometric characteristics of the spherical shell, the simplicity of its geometry will lead to great complexity in its vibration and buckling analysis processes. This paper mainly reviews the previous analytical and numerical research on the vibration and buckling of the FGM spherical shell. The shell's middle plane equilibrium equations are derived from plate theory. The Galerkin method, the Ritz method, the power series solution method, and other methods are introduced to carry out the vibration and buckling analysis. The frequencies, mode shapes, and the critical buckling load of the FGM spherical shells, which are under various boundary conditions and external pressure.
Static deflection of pre-twisted beam subjected to transverse load
الباحثونSaddam K. Al-Raheem، Hayder Zuhair Zainy
Aziz D. Almawash
Luay S. Alansari
Saif W. Mohammed Ali
المجلةResults in Engineering
التاريخ2024-02-27
مختصر البحثIn the current research, the static deflection of the pre-twisted beam has been calculated experimentally and
numerically using finite element approach (ANSYS workbench 2020R1) and under the effects of different twist
angles, different lengths, four boundary conditions of edges support of the beam. The beam was manufactured
from PETG filament material by a 3D printer at room temperature. The obtained results showed reasonable
acceptance between the experimental and numerical pre-twisted beam deflection. The numerical maximum
deflection of the pre-twisted beam decreased with the increase of twisted angle of the beam for clamped-simply
and simply-simply edges support. While it was irregularly various for clamped-clamped edge support with a
minimum value of the maximum deflection occurred at the twist angle 135o. The maximum deflection of the pretwisted
beam is disappeared gradually at the twist angles greater than 270o for claimed-free edge support. In
addition, the maximum deflection of the pre-twisted beam increased due to the beam length increment.
Experimental and Numerical Investigation
of the Natural Frequency for the Intact
and Cracked Laminated Composite Beam
الباحثونRaghad Azeez Neamah، Saddam Khalsan Al-Raheem
Emad Kadum Njim
Zainab Abboud
Luay Sadeq Al-Ansari
المجلةJournal of Aerospace Technology and Management
التاريخ2024-08-12
مختصر البحثIn this study, several composite beam samples were made from woven fiberglass and epoxy. The first sample was created
using epoxy, whereas the others used epoxy together with fiberglass layers. These samples were used to study, experimentally and
numerically, the effect of fiberglass layers on the natural frequency of composite beams. A numerical model was constructed using
ANSYS software 17.2 to assess vibration properties for the manufactured samples. The effects of boundary conditions (simply
supported, clamped-clamped, and clamped-free), with crack depths (2 mm and 3 mm) and the number of fiberglass layers (0, 1, 2,
3, and 4) were investigated. The results of the experimental and numerical models were compared, and the numerical model was
acceptable with an error rate of less than 15%. Crack depth has a significant impact on natural frequency and mode shape; therefore,
transverse cracks were created in the upper surfaces of beams to investigate the vibration mode shape and natural frequency.