مواقع التدريسيينجامعة الكوفة
Haider Ali Abdulhussein Al-Tameemi
Assistant Professor

Haider Ali Abdulhussein Al-Tameemi

0Publications
0Lectures
0Interests

About

PhD in Civil Engineering / Constructions from University of Babylon in 2016. MSc in Civil Engineering / Constructions from the University of Kufa in 2005. Lecturer in Faculty of Engineering / University of Kufa since 2006. Structural designer at designs department in University of Kufa. Supervisor civil engineer at buildings department in Najaf / Ministry of Construction and Housing from 2004 to 2006.

Research Interests:

• Structural analysis
• Strengthening of structural members
• Spliced reinforced concrete beams/girders
• Horizontally curved reinforced concrete beams

Teaching interests:

• Structures
• Concrete design
• Construction of buildings
• Mechanical engineering
• AutoCAD
• Structural drawing
• Programming language Fortran
• Concrete Technology Laboratory

Selected publications:

Ali, Ammar, Y.; Kadhum, Mohammed, M.; and Al-Tameemi, Haider, A., 2016, “Experimental Investigation for Behavior of Spliced Continuous RC Girders Strengthened with CFRP Laminates” Journal of Babylon University/Engineering Sciences, No. (1), Vol. (24).
Ali, Ammar, Y.; Kadhum, Mohammed, M.; and Al-Tameemi, Haider, A., 2016, “Nonlinear Analysis of Spliced Continuous RC Girders Strengthened with (CFRP) Laminates using ANSYS” Journal of Babylon University/Engineering Sciences, No. (1), Vol. (24).
Ali, Ammar, Y.; Attiya, Ali, N.; and Al-Tameemi, Haider, A., 2010,”Three-Dimensional Nonlinear Finite Element Analysis of Reinforced Concrete Horizontally Curved Deep Beams” Journal of Babylon University/Engineering Sciences.

Research Interests

1

Publications

4
2016

“Experimental Investigation for Behavior of Spliced Continuous RC Girders Strengthened with CFRP Laminates”

AuthorsAl-Tameemi, Haider, A. , Ali, Ammar, Y.and Kadhum, Mohammed, M.;
JournalJournal of Babylon University/Engineering Sciences
Abstract

In this paper, the behavior of spliced continuous reinforced concrete girders was experimentally investigated. The main objective was to examine the contribution of the carbon fiber reinforced polymer (CFRP) laminates in strengthening the spliced continuous reinforced concrete girders. Eight models of continuous reinforced concrete girder were constructed and tested. The test variables were strengthening the splice joints by different schemes of CFRP laminates, presence of horizontal stirrups through the interfaces of the joints and using binder material at the interfaces of the joints. The results showed that strengthening the continuous spliced girders with 45° inclined CFRP laminates led to an increase in the ultimate load in a range of (47 to 74%). Besides, strengthening the continuous spliced girder with horizontal CFRP laminates bonded at its lateral faces could increase the ultimate load by 70%. Additionally, the ultimate load of the continuous spliced girder was increased by (30%) due to presence of the horizontal steel stirrups through the interfaces of the joints.

2016

Nonlinear Analysis of Spliced Continuous RC Girders Strengthened with (CFRP) Laminates using ANSYS

Authors.Al-Tameemi, Haider, A, Ali, Ammar, Y. and Kadhum, Mohammed, M.;
JournalJournal of Babylon University/Engineering Sciences
Abstract

This paper presents the details of the finite element analysis of spliced continuous reinforced concrete girders. Five spliced continuous girders and one non-spliced continuous girder were analyzed using the ANSYS program. Each spliced girder consisted of three precast segments spliced at two cast-in-place joints at the inflection points, using splices of hooked dowels. Three spliced girders were strengthened using different schemes of the carbon fiber reinforced polymer (CFRP) laminates. The concrete was modeled using (SOLID65) eight-node brick element and the steel reinforcement was modeled discretely using (LINK8) spar element. The straight parts of the spliced bars were modeled using discrete representation with interface elements using (COMBIN39) elements to represent the bond-slip behavior while the hooked part of each spliced bar was replaced by a single spring element. The CFRP laminates were modeled using (SHELL41) shell element. The interfaces between the precast concrete segments and the joints were modeled using CONTAC52 interface elements in conjunction with vertical spring elements to represent the dowel action of the steel bars that crossing the interfaces. The ANSYS model succeeded to an acceptable degree in predicting the structural behavior of the analyzed spliced girders with average of differences of about 6% between the predicted and experimental ultimate load.

2010

Three-Dimensional Nonlinear Finite Element Analysis of Reinforced Concrete Horizontally Curved Deep Beams” Journal of Babylon University/Engineering Sciences.

AuthorsAl-Tameemi, Haider, A, Ali, Ammar, Y.and Attiya, Ali, N
JournalJournal of Babylon University/Engineering Sciences.
Abstract

This research deals with the analysis of reinforced concrete horizontally curved deep beams, loaded transversely to its plane, using a three-dimensional nonlinear finite element model in the pre and post cracking levels and up to the ultimate load. The 20-node isoparametric brick element with sixty degrees of freedom is employed to model the concrete, while the reinforcing bars are modeled as axial members embedded within the concrete brick element. Perfect bond between the concrete and the reinforcing bars is assumed. The behavior of concrete in compression is simulated by an elasto-plastic work hardening model followed by a perfect plastic response, which is terminated at the onset of crushing. In tension, a fixed smeared crack model has been used with a tensionstiffening model to represent the retained post-cracking tensile stress. Also, a shear retention model that modifies the shear modulus after cracking is used. Numerical study is carried out to investigate the effect of the shear length to effective depth ratio (a/d) on the ultimate load resisted by curved beams. Numerical study is carried out to investigate the effect of the central subtended angle, boundary conditions, amount of transverse reinforcement, and using additional longitudinal bars (horizontal shear reinforcement) on the behavior of reinforced concrete horizontally curved beams with different shear length to effective depth ratios (a/d).

2025

Two-way shear behaviors in hybrid reinforced concrete flat slabs with inset square ducts

AuthorsAli Imad Al-Bahrani , Haider Ali Al-Tameemi
JournalAIP Conference Proceedings
Date2025-05-08
Abstract

This research examined the two-way shear behavior of hybrid concrete slabs with embedded square ducts, investigating five reinforced concrete flat slabs. Four slab specimens were constructed with square ducts going through the thickness of the slab at various positions, while the fifth was constructed using normal concrete with no duct, to act as a control specimen. The test variables were using self-compacted concrete of higher strength around the ducts at various positions. According to the test results, adding a square duct across the full slab thickness at a horizontal distance from the face of the column equal to or less than the slab thickness resulted in a significant decrease in the capacity of punching shear for the flat slabs. Additionally, flat slabs made with hybrid concrete showed better structural behaviors than flat slabs made with normal concrete. For slabs with ducts near the column face, slab punching shear capacity was increased by 12% when high-strength concrete was used to surround the duct, though this effect decreased as the duct was placed further away from the column.

Lectures

12
View details