مواقع التدريسيينجامعة الكوفة
0Publications

About

Academic Qualification University Country Year
B. SC. Musel Iraq 1992
M.SC. Technology Iraq 2000

Computer aided program to evaluate and design flexible overlay on flexible pavement
Ph. D. Mustansiryia Iraq 2008
Model development to predict moisture damage in asphalt paving materials mixtures

lectures the following
1-traffic EngineeringL/3 rd
year/Engineering College.
2 -Engin. Mechanics/1nd year/
Engin. College.
3 3 –Drawing EngineeringL 1 st stage LEng. college Mechanics
/2stEngineering & College.
4 4 – Practical surveiyingeL2 nd Eng. college.
/ 4st Engineering College.
5 – Engineering Materials /2 nd EnEng. College.
6-Supervision on 4 th stage project
This Exper.: From 1994-2008
6- diploma in highway and transportation

Publications

13
2022

Effect of Waiting Time on Gap Acceptance Characteristics of Change Direction U-Turn Opening

AuthorsAhlam K. Razzaq, Khawla H.H. Shubber
JournalIIETA Mathematical Modelling of Engineering Problems
Abstract

This paper investigated the effect of some traffic factors such as waiting time and traffic volume increasing on gap acceptance characteristics i.e., driver’s behavior, limits of gap acceptance, critical gap, and the facility capacity. The current study depends on real field data collected at selected change direction U-turn within Najaf city highways network (center city of the Najaf governorate located approximately 160 km south of Baghdad, the capital of Iraq). The study focused on the passenger cars and minibus drivers maneuvering at change direction U-turn opening as the primary case study. The statistical analysis approach depended on evaluating traffic factors selected as parameters and their degree of influence on U-turn capacity. The results of statistical analysis established that firstly, waiting time range between 21 - 30 sec, lead driver to enforce opposing direction traffic flow to accept gap size less than that when waiting time fall in the range of 11 to 20 sec at a confidence interval of 95% for a passenger car. While, minibus shows results higher than passenger car by approximately 20%. Secondly, there is a slightly different mean gap acceptance between an interval of (1- 10) and (11-20) sec) for both types of vehicles at the same confidence interval. On the other hand, results showed the studied U-turn change direction median critical gap equal to 3.75 sec. and follow-up time was 1.1 seconds. According to Siegloch’s formula the maximum capacity of 3273 pcu/hr. Other results show that the highest wait time group interval (when taken as the mean value) is lower than the critical gap. The main recommendation obtained due to the hazard of studied change direction U-turn is the importance of control and management it.

2021

Studying the behavior of the concrete mixture with wheat straw as part of the cement

AuthorsMohammed Abd Al-Kadhim Hameed, Ahlam K. Razzq Alzerjawi and Zaid Abdulzahra Mahdi
JournalIICESAT Conference, College of Material Engineering, University of Babylon, Iraq Journal of Physics
Abstract

This paper is an experimental study that was made on the effects of using Wheat Straw Ash (WSA) as a partial replacement of cement in the concrete mixture. The control specimens with ordinary portland cement (OPC) were made and in other specimens, cement was replaced with 10%, 15%, and 20% of WSA by weight of the cement. Wheat straw locally available was burned to ash in a controlled manner in the oven, which was used in this study. The destructive tests included the compressive strength, modulus of rupture, and splitting tensile strength were carried out on the concrete mixture using WSA at a different percentage of cement replacement and were and compared with control specimens. The tests result gained show that the compressive strength decreases when surrogating cement with WSA. While the modulus of rupture increase with 10 % WSA also, the splitting tensile strength increase with 15 % WSA.

2020

Effect of Silica fume on Cold Mix Asphalt Mixture

AuthorsDr. Ahlam khudair Al-Zarjawi, Zaid Abdulzahra Mahdi& Haneen Hamza Abbas
JournalIOP Conf. Series: Materials Science and Engineering
Abstract

The cold asphalt emulsion mixture CAEMs is a mixture consisting of asphalt emulsion with aggregate mixed at room temperature. CAEMs is the most preferred layer in recent times as it is most safe in terms of the lack of environmentally friendly and healthy volatile fumes. Many studies have demonstrated that silica fume has significant effects in improving the engineering properties of asphalt binder and mixture. Several requirements were conducted on compacted modified CAEMs with silica fume during the practical program of this research, such as Marshall stability test, density, air voids, indirect tensile strength (exposed to freezing and thawing conditions and not exposed to it and the effect of moisture in addition to non-destructive examination using sound waves .Results of this study prove that using silica fume improved the behavioral properties of cold mix. Higher Marshall Stability (100%) , Higher tensile strength(219%) than the conventional mixture( without additives) and had a positive effect on the resistance to freezing and thawing condition.

2020

Effect of Silica on Hot Mix Asphalt Mixture

AuthorsDr. Ahlam khudair Al-Zajrawi, Bahaa Turki Mashkur&Zaid Abd Al- zahra
JournalIOP Conference Series: Materials Science and Engineering
Abstract

The hot asphalt mixture is the main layer in flexible paving as it is exposed to traffic loads and environmental factors which require high resistance, high durability and good stability to avoid structural deformities that leading to functional and structural failure. In the past few years. Several tests have been carried out on the prepared and compact specimens such as density testing, indirect tensile strength (exposed to freezing and thawing conditions and not exposed), stability and flow as well as non-destructive test using sound waves. The results of the tests showed that the specimens, containing silica fume as apart from filler aggregate (Portland cement) , have high Marshall stability-flow and extra resistance to tensile strength than conventional specimens that contain just ordinary Portland cement. All results found to be satisfied the Iraqi specifications adopted for roads and bridges. Calculation of optimum silica fume content has achieved for all tests in order to find overall optimal content which was 4.2%. Key words: Silica fume, Hot asphalt mix, Stability, Tensile strength, Filler.

2020

Evaluating the effect of air voids and asphalt content on the mechanical properties of HMA by adopting Indirect Tensile Strength Test

AuthorsDr. Ahlam K Razzaq, Nibras Ali Hussain & Hussein Jalo Mohammed Hasan
JournalInternational Journal of Engineering & Technology SPC
Abstract

Moisture damage in asphalt mixtures can be defined as the loss in strength and durability due to the presence of water. Iraq road network is showing severe deterioration such as raveling and stripping because the bond between aggregates and asphalt film is broken due to water intrusion. To minimize moisture damage, asphalt mixes are investigated to evaluate the effect of air voids, degree of saturation, percent of asphalt content and the conditioning period. Several laboratory tests has been conducted during this study included Marshall stiffness test included stability and flow, retained Marshall stability , indirect tensile strength IDT and resilient modulus of asphalt mixes. Furthermore, the work requests accounting of voids in total mix percent VTM, voids filed with asphalt VFA, voids in mineral aggregate VMA and degree of saturation in addition to tensile strength ratio TSR. The results showed that both the degree of saturation and the compaction effort would led to accelerate the deterioration in hot mix asphalt performance and its resistant to moisture damage. Several formulas would create in this study to predict tensile strength ratio from degree of saturation for any asphalt content.

2020

Traffic Characteristics of Two-WayTwo-Lane (TWTL) Highway in Iraq: Al-Mishkhab Road As A Case Study

AuthorsAhlam K. Al-Zerjawi1, Hamid A. Al-Jameel and Sajad A. Zagroot3
JournalICCEET 2020 IOP Conf. Series: Materials Science and Engineering
Abstract

Two-Way Two-Lane (TWTL) highways have been developed rapidly throughout the world, and they represent a large percentage of the road network spread about the world. In Iraq, this type of road still has also been adopted widely. Therefore, this study tries to investigate the two-way, two-lane highway characteristics because very few studies have been devoted to studying this topic in Iraq. Three sections of this type of highway have been selected along Al- Mishkhab city as a case study. The data collected include flow, headway, number passing and speed. A speed gun was used to measured speed in the selected sections. The passing frequency was high and amounted to about 240passings/hr. Further, the speed distribution was normal. The results of this study indicate that the number of passing vehicles is up to 240 passes/hr/km at 1200 veh/hr. In addition, as flow increases more than 1200 veh/hr, the number of passing vehicles decreases because of absence the adequate gap for such passing.

2016

THE INFLUENCE OF THE CONFIGRATION OF HEAVY VEHICALES AND THE GRADE ON FLEXIBLE PAVEMENT

AuthorsLecturer Dr. Ahlam K. Razzaq
Journalnternational Journal of Scientific & Engineering Research
Abstract

One of the major sources of distress in roads is the rut that appear in flexible asphalt pavements. Combined wheel , thermal load , and grade induced rutting in the form of longitudinal rut and horizontal shoving . In this project, combined effect of wheel loads and grade is considered in field measurement of flexible pavement layers. The deformed effect (deflection) under various distance from the wheel load in order to draw the deflection basin curve predicting for the pavement .The maximum value has been recorded at center of wheel of heavy vehicle. Since the AASHO road study was conducted in the late 1950s and early 1960s.,starting the creating prompted several researchers to investigate the impacts of track axle loads and configurations on pavement performance concerns about theirs effects on pavement's damage and performances representing in deflection phonemes, which is unaccounted for in the AASHTO procedure.[ Belsley et. al.,1980]. However, there is still a need to strengthen the mechanistic findings using field data. To focus and more detail on this subject, the study was conducted by often road has passed by heavy vehicles near cement plant in Najaf and collected field data and displacement measured under loads in a manner enunciated specifications when using Benkelman beam device. The results appears that trucks with multiple axles produce more deflected damage than those with only single and tandem axles. On the other hand, heavy vehicles with single and tandem axles tend to cause more distresses. Keywords: Flexible pavement, rut, wheel loads, deflection, .

2016

POSSIBILITY OF UTILIZING RECYCLED CONCRETE AGGREGATES IN HMA MIXTURE

AuthorsAhlam K. Razzaq1
JournalKufa Journal of Engineering Vol. 7, No. 3, October 2016, P.P.96-109 Received on 25 April 2016, acc
Abstract

Environmental and economic considerations have encouraged civil engineers to find ways to reuse recycled materials in new constructions. The objective of this research was studying the possibility of utilizing recycled concrete RC in a surface course of hot mix asphalt HMA mixtures and evaluating the volumetric and mechanical properties of hot mix asphalt mixtures containing recycled concrete aggregates. For this purpose, the performance of HMA mixtures containing various percentages of RC has been evaluated based on experimental tests, such as Marshall Stability MS, Marshall flow, Marshall stiffness, and Indirect tensile strength ITS. 90 specimens contain 5% asphalt bitumen and RC in various percentages (10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, and 100%) were mixed with virgin crushed stone aggregates and compacted by using Marshall Compactor to produce HMA specimen then Marshall mix design method was used to measure the optimum RC content. The results of MS and flows slightly decreased with the addition of RC. Marshall stiffness values for 10 percent RC was higher than the Control Specimen CS and the others. ITS values decreased with increasing RC. A mixture without recycled concrete RC and varies gradation of maximum size of (1 ) inches was prepared as control mix to CM test the Marshall stability –flow , ITS, and temperature sensitivities properties of mixes with 58% ( optimum percent) of RC that is obtained from a mix design that was investigated in this study. Specimens showed slightly improvements in Marshall Stability, flow, and ITS as compared with CM.

2016

Estimation of free flow speeds and passenger car equivalent factors for multilane highways

AuthorsLecturer Dr. Ahlam k. Razzaq Al-zerjawi
JournalInternational Journal of Scientific & Engineering Research,
Abstract

Free-flow speed is a parameter that is being used extensively for capacity and level-of- service analysis of various types of highway facilities. This study collects and analyzes free-flow speed data at the midpoints of forty-two multilane rural and suburban highway segments throughout Al-Najaf government. The objectives of this study are to develop models for estimating average free-low speed and for identifying the distribution of individual free-flow speeds. The most important variables that govern free-flow speed are vehicle type, space mean speed, and functional classification of highway . The resulting models facilitate the estimation of free flow speeds of rural and suburban highways. The Highway Capacity Manual (HCM- 2000) uses density method to derive its passenger-car equivalent factors (PCE) for heavy vehicles. These PCEs appear as “ ET ” in HCM tables where the ET is 1.5 for all urban highways and rural highways in level terrain . The density method assumes homogeneous traffic. Strict lane discipline characterizes homogeneous traffic. By using the density method, we can derive more accurate passenger car unit factors for Iraqi conditions. The passenger car unit factor (PCU) for trucks and buses is 2.0 in level terrain.

2016

INVISTICATION OF THE RESISTANCE HMA WITH RECYCLED AGGREGATE TO MOISTURE INDUSED DAMAGE.

AuthorsDr. Ahlam K. Razzaq, Nibras Ali Hussain
JournalInternational Journal of Advanced Research (2016), Volume 4, Issue 6, 1209-1214
Abstract

HMA made from a specific materials may be need to strength when is subject to water in the pavement layers because of the ability of water to prevent the binder to not adhere to the aggregate and it will not to hold the pavement together which leads to rapid failure of the pavement .This is often referred to as stripping that it makes treatments such as enhance the pavement layers with certain materials from presence of water . Test methods are study to measure the resistance of different mixturesutilizing recycled aggregate to saturation periods and also to measure the significance of using theanti-stripping as additives. This research was in exposing the three types of asphalt, one 60% of recycled aggregate from asphalt mixture and the other 60% recycled aggregate from the concrete mix and third mix using 10% from wax as additive by weight of asphalt, to merging in water with different durations represented as (3, 7, 15, 28) days . Different experimental tests were also conducted and compared the results with virgin asphalt mixture for the same conditions. The tests used was (Marshall stability and flow), bulk density, indirect tensile strength, compressive strength, sensitivity to temperature, resilient modulus. The investigation was successful so it gave valuable results showing improved asphalt resistance to moisture damage when using recycled aggregate from previous mixes and provingthe wax effectiveness in increasing these resistance and improve HMA properties

2016

Study of traffic violations and identify their causes and disadvantages in the city of Holy Najaf

AuthorsDr.Ahlam K.Razzaq
Journalat Babylon journal of scientific and Engineering researches
Abstract

أصبحت المخالفات المرورية تمثل وبشكل كبير هاجساً وقلقاً لكافة أفراد المجتمع، وأصبحت واحدة من أهم المشكلات التي تؤدي الى استنزاف الموارد المادية والطاقات البشرية من خلال الحوادث التي تنجم عنها وتستهدف المجتمعات في أهم مقومات الحياة والذي هو العنصر البشري إضافة إلى ما تكبده من مشاكل اجتماعية ونفسية وخسائر مادية ضخمة، مما أصبح لزاماَ العمل على إيجاد الحلول والاقتراحات ووضعها موضع التنفيذ للحد من هذه الحوادث أو على أقل تقدير معالجة أسبابها والتخفيف من آثارها السلبية .ان ما ينطبق على مشكلة المخالفات في العراق ينطبق على مدينة النجف التي تعتبر واحدة من أهم المدن العراقية الجاذبة للسكان العراقيين والاجانب الذين يؤوون اليها لأداء زيارات الأماكن المقدسة فيها. تهدف الدراسة إلى وضع الحلول الممكنة لتحقيق السلامة المرورية والحفاظ على الأرواح والممتلكات وتبني الخطط والبرامج المرورية والإجراءات الوقائية للحد من الخسائر البشرية والحفاظ على المقومات البشرية والاقتصادية للبلد.

2013

DEVELOPEMENT OF MODEL For the Prediction of Tensile Strength in Asphalt Concrete Mixtures

AuthorsProf.Hamed M.Hamdo, Assist.Prof. Dr.Namir G.Ahmed and Dr.Ahlam K.Razzaq
Journalalmustansiryia jourael of scientific researches
Abstract

The presence of water (or moisture) often results in premature failure of asphalt pavements in the form of isolated distress caused by deboning of the asphalt film from the aggregate surface or early rutting/fatigue cracking due to reduced mix strength. The damage due to moisture is controlled by the specific limits of the tensile strength ratios (TSR) or the percent loss in tensile strength of the mix. Loss in the pavement strength due to moisture damage indicates that the individual tensile strength of the mixtures after conditioning will govern the rutting and fatigue life of the mixtures. Tensile strength plays an important role in the performance of asphaltic mixture under fatigue, rutting and moisture susceptibility. In the present research , a development of Tensile strength model was carried out taking into account a suitable amount of data including; asphalt content , stiffness of mix , density, VMA , voids in mix, degree of saturation, type of specimen( field, lab) , testing temperature and type of modifier. Stepwise regression technique was used with the aid of (STATISTICA – Version 5.5) computer package to carry out the statistical process. The validation process for the developed model with 95% confidence level shows that, this model is adequate to be used for the prediction of tensile strength of asphalt mixes within the properties of local materials, loading and environmental condition and the range of available data. .

2011

A Developed Criterion to Evaluate Moisture Susceptibility of HMA Pavements in Iraq

Authorsprof. Hamed AL-Hamdou, Dr.Namir G.Ahmed and Dr. Ahlam K.Razzaq
JournalAl Mustansiria journal of scientific and Engineering researches
Abstract

Moisture damage of hot mix asphalt (HMA) pavements is not a distress by itself but represents a conditioning process after which several distresses may occur individually or simultaneously including pavement deformation and fatigue cracking. In Iraq, there is a lack of information regarding the HMA moisture sensitivity. Therefore, a developed guide to the pavement maintenance agencies (SCRB, Baghdad Mayoralty, and the Ministry of Municipalities) may assist local engineers to make the proper decision in this aspect. Accordingly, investigating the factors affecting moisture susceptibility of asphalt concrete mixtures is considered to improve moisture resistance of HMA mixtures. Asphalt, aggregates, and filler used in this study, are locally available and selected from the currently used materials in roads construction. Two types of additives; SBR and Wax were used as modifiers to asphalt. A Wheel-Tracking Device was used to test the laboratory and field prismatic slab samples for extensive permanent deformation. The dominant factors influencing moisture sensitivity such as; type of modifier, testing temperature and level of compaction were considered throughout the experimental tests. Based on the results and analysis, it was observed that the load repetition to achieve stripping is higher by 18.5% if 3% of SBR is added to the optimum asphalt content, while it is higher by 17.48% if 10.6% of WAX is added as compared with the conventional mixes. Furthermore, it can be concluded that the stripping inflection point (SIP) starts at 9,500 wheel passes, after which moisture damage begins to influence durability of local asphalt concrete mixtures. This finding is recognized to be used as a criterion to start the required maintenance and/or rehabilitation for pavements due to moisture damage.

View details