مواقع التدريسيينجامعة الكوفة
سهاد جبار حمد النصراوي
أستاذ

سهاد جبار حمد النصراوي

English Version
0بحث منشور
0محاضرة
0اهتمام بحثي
0خبر

الملف الشخصي

أنا أستاذ في فرع معالجة و ترميم الاسنان في كلية طب الأسنان / جامعة الكوفة

تخرجت من كلية طب الأسنان في جامعة بغداد عام 1995 بتسلسل التاسع وعملت في نفس الكلية في قسم معالجة وترميم الاسنان. أكملت شهادة الماجستير لنفس الاختصاص في كلية طب الأسنان/ جامعة بغداد (1999) تحت الإشراف المباشر للأستاذة ماجدة الهاشمي الحاصلة على الاختصاص من جامعة أوهايو الأمريكية. بعد الماجستيرعملت كتدريسية في الكلية نفسها ، وانتقلت لاحقًا إلى كلية طب الأسنان بجامعة الكوفة. نتيجة لعملي البحثي تمت ترقيتي لاحقًا إلى أستاذ مساعد.

حصلت على منحة من وزارة التعليم العالي والبحث العلمي في العراق لاستكمال دراستي العليا و التحقت بدراسة دكتوراه في 2014 باختصاص حشوات الجذور في بريطانيا جامعة مانشسترSchool of Dentistry /University of Manchester.
في يونيو 2015 ، فزت بجائزة أفضل عرض ملصق للبحوث في يوم عرض بحوث الدراسات العليا فيSchool of Dentistry /University of Manchester. تم تعييني كممثلة عن طلبة الدراسات العليا كلية طب الأسنان لجامعة مانشستر PGR في عام 2016. بالإضافة إلى ذلك ، عملت كممتحن بجامعة مانشستر لتقييم طلاب طب الاسنان في العرض الشفهي لـ CAT في عام 2016 و BDS OSCE في عام 2017. حصلت على شهادة الدكتوراه في 2018. حصلت على لقب الاستاذية في 2020.

الاهتمامات البحثية

2

البحوث المنشورة

11
2021

Studying Effects of Calcium Oxide Nanoparticles on Dentinogenesis in Male Wistar Rats

الباحثونBushra Habeeb Al-Maula، Zena Jehad Wally, Mohanad Jameel Najm Al-Magsoosi, Rasha Hatem Dosh, Ruba M Mustafa, Suhad Jabbar Hamed Al-Nasrawi, Abdullatif Alfutimie, Julfikar Haider
المجلةInternational Journal of Dentistry
مختصر البحث

This study aimed to evaluate potential impacts of calcium oxide nanoparticles (CaO-NPs) at different dosages on predentin thickness, number of blood vessels, periodontal ligament thickness, and blood glucose level of Wistar rats. Twelve rats were randomly gathered into four groups, untreated (control) and CaO-NP-treated groups at three concentrations (25, 50, and 100 mg/kg of the body weight) over a period of 60 days. Histological investigation was performed on twenty-four lower incisor teeth extracted from all the tested groups under a light microscope, and an automatic Fujifilm was used to measure the blood glucose level. The results showed that regular nanoparticle treatment significantly increased predentin and periodontal ligament thicknesses, a gradual decrease in vascularization in the pulp tissue, and an increase in the blood glucose level as the dosages of nanoparticles administered to the rats increased. Administration of the CaO-NPs at low dosage (25 mg/kg) could be beneficial for the growth and integrity of teeth and dentinal tissues in rats.

2021

Chemical Characterisation of Silanised Zirconia Nanoparticles and Their Effects on the Properties of PMMA-Zirconia Nanocomposites

الباحثونSaleh Zidan، Nikolaos Silikas 2 , Suhad Al-Nasrawi 3 , Julfikar Haider 2,4 , Abdulrahman Alshabib 5, Alshame Alshame 6 and Julian Yates
المجلةMaterials 2021, 14, 3212.
مختصر البحث

Abstract: Objectives: The objective of this study was to investigate the mechanical properties of highimpact (HI) heat-cured acrylic resin (PMMA) reinforced with silane-treated zirconia nanoparticles. Methods: Forty-five PMMA specimens reinforced with zirconia were fabricated and divided into three groups: Pure HI PMMA (control group), PMMA reinforced with 3 wt.% of non-silanised zirconia nanoparticles and PMMA reinforced with 3 wt.% of silanised zirconia nanoparticles. Silanised and non-silanised zirconia nanoparticles were analysed with Fourier Transform Infrared (FTIR) Spectroscopy. For measuring the flexural modulus and strength, a Zwick universal tester was used, and for surface hardness, a Vickers hardness tester were used. Furthermore, raw materials and fractured surfaces were analysed using Scanning Electron Microscopy (SEM). A one-way ANOVA test followed by a post-hoc Bonferroni test was employed to analyse the data. Results: The results showed that the mean values for flexural strength (83.5  6.2 MPa) and surface hardness (20.1  2.3 kg/mm2) of the group containing 3 wt.% treated zirconia increased significantly (p < 0.05) in comparison to the specimens in the group containing non-treated zirconia (59.9  7.1 MPa; 15.0  0.2 kg/mm2) and the control group (72.4  8.6 MPa; 17.1  0.9 kg/mm2). However, the group with silanised zirconia showed an increase in flexural modulus (2313  161 MPa) but was not significantly different (p > 0.05) from the non-silanised group (2207  252 MPa) and the control group (1971  235 MPa). Conclusion: Silane-treated zirconia nano-filler improves the surface hardness and flexural strength of HI PMMA-zirconia nanocomposites, giving a potentially longer service life of the denture base.

2021

Impact of Peracetic Acid on the Dynamic Cyclic Fatigue of Heat-Treated Nickel-Titanium Rotary Endodontic Instrument

الباحثونSuhad Al-Nasrawi، ,Zuha Ayad Jaber, Nibrass Talib Al-Quraine, Abtesam Imhemed Aljdaimi Sattar JabbarAbdul-ZahraAl-Hmedat, SalehZidan, Julfikar Haide
المجلةInternational Journal of Dentistry
مختصر البحث

Peracetic acid (PAA) is widely used as a sterilizing/disinfecting agent, and, in endodontics, it has been introduced as a promising irrigant in root canal treatment. It has been used at different concentrations to achieve various functions. However, endodontic instruments in contact with PAA of a certain concentration may affect their fatigue resistance. /erefore, the aim of this study was to investigate the impact of PAA on the cyclic fatigue resistance of three commercial heat-treated nickel-titanium (NiTi) rotary files. /ree types of heat-treated NiTi rotary files were selected: One Curve (OC), ProTaper Gold (PTG), and Wave One Gold (WOG). Each type was divided into three subgroups (n � 6 for each file type): (1) untreated instruments; (2) files immersed in 0.002% PAA; and (3) files immersed in 0.35% PAA. /e performance of each file type was tested in a simulated canal. /e number of cycles to fracture (NCF) was determined to assess cyclic fatigue resistance of the files. Independent sample t-test was applied to compare each treated file within a subgroup with its respective control group, and one-way ANOVA was used for comparison among the main groups. All types of tested files revealed a significant decline in the cyclic fatigue resistance after exposure to 0.002% PAA except the PTG (P � 0.209). After exposure of the files to a higher concentration (0.35% PAA), a dramatic reduction was demonstrated by all the groups. Before and after exposure of the files to PAA, PTG displayed the highest cyclic fatigue resistance, followed by the WOG, while the OC showed the lowest resistance. Exposure of heated-treated NiTi files to PAA in a relatively high or low concentration adversely affects the cyclic fatigue resistance. /e PTG files demonstrated the best performance among the tested types and can be disinfected with 0.002% PAA for clinical purpose.

2021

Evaluating in-Vitro Performance of Novel Nickel-Titanium Rotary System (TruNatomy) based on debris extrusion and preparation time from Severely Curved Canals

الباحثونRuba Mustafa، Taher Al Omari Suhad Jabbar Al-nasrawi Rami Al Fodeh Alaa Dkmak
المجلةJournal of Endodontics
مختصر البحث

Introduction This laboratory-based study aimed to investigate the quantitative amount of apically extruded debris from severely curved root canals and preparation time for the novel rotary system, TruNatomy (TN), compared to Reciproc Blue (RCB), HyFlex (HCM, HEDM) and ProTaper Next (PTN) rotary systems. Methods One hundred mandibular molar human teeth with sever curvature of the mesiobuccal canal (25º- 45º) were included in the present study. The specimens were randomly distributed in balanced five groups (n=20): TN, RCB, HCM, PTN, and HEDM. The amount of extruded debris for each group during instrumentation at body temperature was collected in an Eppendorf tube. After desiccation, the mean debris weights for each group were calculated. The total preparation time for each group was also recorded. Data were statistically analysed using the Kruskal–Wallis test at a significance level of P < 0.05. Results HCM and HEDM groups extruded a significantly higher amount of debris than the other tested groups (P < 0.001). TN extruded the least amount of debris, but it was not significantly different compared to the RCB and PTN groups (P > 0.05). In terms of preparation time, the TN group did not show any significant difference compared to the other groups. Conclusions All instrumentation systems extruded debris. The TN was among the groups that produced the lowest amount of apically extruded debris that is probable clinically acceptable, since it is equitable to two popular systems and statistically significantly less than two other popular systems studied.

2020

The Effect of Biodentine Maturation Time on Resin Bond Strength When Aged in Artificial Saliva

الباحثونRuba M. Mustafa، Suhad J. Al-Nasrawi Abtesam I. Aljdaimi
المجلة International Journal of Dentistry
مختصر البحث

Biodentine is a calcium silicate cement (CSC) that has been broadly applied in vital pulp therapy. 'e quality of the Biodentinecomposite bond has a significant effect on the longevity of the definitive restoration.'eaim of this study is to investigate the shear bond strength (SBS) between Biodentine and composite restoration at different maturation times of Biodentine aged in artificial saliva. Fifteen Biodentine discs were allocated into three groups (n � 5) based on the timeframe of performance of composite restoration: immediate (after 12 min), after 14 days, and after 28 days of Biodentine maturation. Total etch and rinse adhesive system and bulk-fill regular resin composite were used. 'e shear bond strength and the failure pattern were assessed. One-way ANOVA with the Bonferroni post hoc test was applied for statistical analysis at p < 0.05. 'e highest (32.47 ± 8.18 MPa) and the lowest (4.08 ± 0.81 MPa) SBS values were recorded for 14 days and 12 min groups, respectively. Significant statistical differences were reported among the groups, and a high statistically significant difference was found between the immediate group and the other groups. Adhesive failure patterns were evident in all groups. More clinically acceptable bond strength between the Biodentine and overlaid composite restoration is at 14 days after Biodentine maturation. Delaying the coverage of Biodentine later than 14 days may significantly reduce the SBS. Using the artificial saliva as an aging medium may affect the SBS between Biodentine and composite material.

2020

Comparative Study to Evaluate the Antimicrobial Effect of MTAD, 17% EDTA, and 3% NaOCl- Against Enterococcus faecalis in Primary Teeth for Root Canals Therapy (in Vitro Study)

الباحثونSarmad A. Hameed1 ، Sana’a Abdulrazzaq Ibrahim2 Suhad Al-Nasrawi3
المجلةMedico-Legal update
مختصر البحث

Aim: This study presented to compare the antimicrobial effect of MTAD, 17% EDTA, and 3% NaOCl, against Enterococcus faecalis (E. faecalis). Methodology: The study utilized 40 extracted human primary teeth with single root canal. The samples were instrumented and sterilized, and then, these teeth were infected with E. faecalis for 2 weeks, after that tooth were divided randomly into 2 groups according to the irrigants used. All the samples were incubated in brain heart infusion (BHI) broth. Irrigation processes were completed according to each material instruction. The effectiveness of irrigants was evaluated by comparison between the pre-irrigation and post- irrigation samples using serial dilution (CFU/ml). Statistical analysis was done using one-way anova with dunnett t3 post hoc test. Results: all samples treated with MTAD showed nearly complete absence of bacteria. the samples treated 3% NaOCl and 17% EDTA showed similar result to the first group, Statistical analysis of the data using dunnett t3 test showed there is no significant difference between the groups (P > 0.05). Conclusion: The study concluded that MTAD was effective as 3% NaOCl -17% EDTA against E. faecalis.

2020

Usage of Synthetic Nanoparticles in Masking of White Spot Dental Lesion

الباحثونBushra Habeeb Al-Maula1، *, Suhad Jabbar Hamed Al-Nasrawi2, Wijdan Abdulameer Kadhim3, Abtesam Imhemed Aljdaimi4, Abdullatif Alfutaimi5
المجلةJournal of Research in Medical and Dental Science
مختصر البحث

Aim: This research aimed to estimate the potential impact of CaO nanoparticles at different concentrations on the remineralization of enamel undergoing cariogenic attack. Materials and methods: Eighteen enamel samples were prepared from sound molars to measure its calcium (Ca) and phosphorus (P) contents by scanning electron microscope equipped with energy dispersive X-ray spectroscopy (SEM-EDS) before and after exposure to cariogenic attack and treatment with saturated gum of 100% CaO nanoparticles (Group 1), 50% CaO nanoparticles (Group 2), and artificial saliva (Group 3). The research data were statistically analysed using the one-way ANOVA and Bonferroni tests. Results and discussion: Group 1 of treatment with 100% CaO nanoparticles demonstrated the largest content of Ca (77.8 wt % ± 9.6) followed by Group 2 and 3 (66.6 wt% ± 1.5, 64.4 wt% ± 1.9, respectively). Conversely, Group 1 had the lowest amount of P (18.9 wt% ± 3.9) followed by Group 3 and 2 (29.9 wt% ± 1.4, 31.0 wt% ± 1.1, respectively). The demineralization is a reversible process which starts with Ca loss before P loss, so it is logical to use a recalcifying agent (Ca containing agent) to enhance the recalcification and regrowth of hydroxyapatite (HA) crystals where the P could be driven from the saliva. CaO is rich with bioavailable Ca contents, favouring the remineralization of caries lesions. Furthermore, as the CaO applied in a nano-size particle, it has the ability to diffuse actively through the tiny spaces of the etched enamel. Conclusion: The use of saturated gum with CaO nanoparticles could overcome the cariogenic challenge. The Ca uptake increased with the increased concentration of applied CaO nanoparticles.

2020

Effect of Autoclave Sterilisation and Heat activated Sodium Hypochlorite Irrigation on the Performance of Nickel-Titanium Rotary Files against Cyclic Fatigue

الباحثونZuha Ayad Jaber، Sattar Jabbar Abdul-Zahra Al-Hmedat, Sarmad Adel Hameed, Suhad Jabbar Hamed Al-Nasrawi, Abtesam Imhemed Aljdaimi, Julfikar Haider
المجلةAdvances in Materials and Processing Technologies
مختصر البحث

Aim: The present study aims to assess the impact of heat-activated sodium hypochlorite (NaOCl) and/or autoclave sterilisation on the cyclic fatigue resistance (CFR) of heat-treated nickel-titanium rotary files used in root canal treatment. Materials and Methods: The CFR of One Curve (OC) files were evaluated under the following conditions: as received (Group 1; control), immersion in NaOCl at 23 ± 1ºC (Group 2), immersion in NaOCl at 60 ± 1ºC (Group 3), autoclave sterilisation at 135 1ºC (Group 4), combined treatment of autoclave sterilisation and immersion in NaOCl at 23 ± 1ºC (Group 5), and combined treatment of autoclave sterilisation and immersion in NaOCl at 60 ± 1ºC (Group 6). A simulated root canal in a zirconia block was utilised to test the performance of the files. The number of cycles to failure (NCF) and fragment lengths were reported for each file, and data were statistically analysed by applying a one-way ANOVA test. Results: All the types of treatments resulted in significant reductions in fracture resistance of the OC files. Immersion of the files in NaOCl at 23ºC revealed the smallest reduction, while combined treatment of autoclaving and immersion in NaOCl at 60ºC caused the greatest reduction. The second greatest reduction was recorded by combined treatment of autoclaving and immersion in NaOCl at 23ºC, followed by the immersion in NaOCl at 60ºC without significant difference between the last two groups. Conclusions: Autoclave sterilisation or exposure of OC files to 2.5% NaOCl adversely affect the cyclic fatigue life and increasing solution temperature or combined treatment caused additionally significant reduction in CFR.

2018

Effect of the Composition of CAD/CAM Composite Blocks on Mechanical Properties

الباحثونRasha Alamoush، Nick Silikas, Nesreen Salim, Suhad al-Nasrawi, Julian D. Satterthwaite
المجلةBioMed Research International
مختصر البحث

The aim of this study was to evaluate the effect of the composition of CAD/CAM blocks on their mechanical properties. Nine different CAD/CAM blocks, enamel and dentine, were tested. Sixteen samples of each material were separated for Vickers microhardness test (n=6, 5 readings per specimen), nanohardness test (n=6, 5 readings per specimen), filler weight (n=3), and SEM imaging (n=1). Data were statistically analysed using one-way ANOVA. Vita Mark II ceramic showed significantly higher values of hardness (in both nano- and microscale) and elastic modulus (6.83 GPa, 502 kg/mm ² , and 47.7 GPa), respectively, than other materials. CAD/CAM composite blocks showed comparable values of hardness and elastic modulus to those of dentine but lower than those of enamel and ceramics. SEM images highlighted different filler-matrix microstructure of CAD/CAM composite blocks. It was concluded that (1) hardness and elastic moduli are positively correlated with ceramic filler percentage and microstructure and (2) CAD/CAM composite materials have comparable hardness and elastic moduli to tooth structure.

2014

The Effectiveness of Three Different Methods for Sterilization of the Endodontic Files (An in Vitro Study)

الباحثونDheyaa Al-Jamell ، Suhad Al-Nasrawi, Nibras Al Quraine, Abtesam Aljdaimi
المجلةAdvances in Life Science and Technology
مختصر البحث

Background: Sterilization is the procedure by which all the vegetative or sport state microorganisms' threats are countered. The main aim of sterilization in the health care field is to eradicate the spread of existing infectious diseases and preventing any new infections. In dentistry, it primarily relates to reuse of instruments to prevent cross-infection and ensure optimal dental care. The complex miniature architecture of endodontic files makes cleaning and sterilization difficult, and some professionals have suggested single use for these instruments.Aim: The purpose of this study was to compare the effectiveness of different methods of sterilization for endodontic instruments: Autoclaving without a plastic bag, Autoclaving with a plastic bag, CO 2 laser, Diode laser, and Glass-bead sterilization. Material and Methods: The study was performed on 60 endodontic K-files, 21 mm long and size 5o, divided into 6 groups, 10 for each, the first group were considered as control. The files contaminated with a homogenous spore suspension of Bacillus thuringiensis. Then, the contaminated files of the 6 groups sterilized by different sterilization methods: Autoclave, Autoclave with a plastic bag, glass-bead, Diode laser, and CO 2 laser. The sterilized files washed in 5ml of normal saline and then 0.1ml suspended solution powered in 8cm Petridis of nutrient agar and number of well isolated colonies were counted after 24 hours of incubation at 37 ºC. Results: The study showed that the files sterilized by autoclave were 99.66 % sterile, while with a plastic bag give a 99.32 %sterile. Those sterilized by glass-bead were96.74 % sterile and those with CO 2 laser were 93.85 %, and diode lasers were 84.24 % sterile. Statistical analysis of all sterilized groups showed a statistical significant difference between groups regarding their sterilization efficiency. Comparison of the sterilized groups with the control group about their efficacies in sterilization showed that the difference was statistically significant. Conclusion: Autoclave, with or without bag, is considered the best sterilizing technique. To achieve one hundred percent of sterilization the time of autoclave must be suitable to allow the killing of all microorganisms. For faster sterilization other methods could be used but with less effectiveness. Aim: The aim of this study was to investigate the efficacy of three methods for sterilization of endodontic instruments: Autoclaving (with plastic bags and without), laser sterilization (CO 2 and diode laser) and glass-bead sterilization.

2014

Antibacterial Activity of Calcium Hydroxide Combined with Chlrohexidine or Sodium Hypochlorite against Gram Positive and Gram Negative Bacteria

الباحثونSuhad J.Hamed ، Israa K. AL-Yasiri, Nibrass T. Ali, Mahdi A. Al-Feron
المجلةJournal of Natural Sciences Research
مختصر البحث

The most significant current goal in endodontology is the maximum reduction of the microorganisms because they play a fundamental role in the etiology of pulpo-periapical pathosis and may escape from tooth and circulate throughout the body to cause an infection in distant part. Numerous materials have been used to achieve this goal. Calcium hydroxide [Ca(OH)2]with its unique properties, need to be mixed with other agents to fulfill its antimicrobial requirement. However, to the best of authors knowledge , no report has been found so far investigates the antimicrobial efficacy of Calcium hydroxide / chlorhexidine [CHX ]combination against klebsiella spp..The aim of this study is to evaluation of the effect of adding CHX or sodium hypochlorite[NaOCl] on the antibacterial activity of Ca(OH)2 against gram positive and gram negative bacteria. The tested samples were grouped into 5 groups of 20 samples for each group: G1:Ca(OH)2 mixed with H2O. G2:2% CHX solution. G3: 2.5% NaOCl solution. G4: combination of Ca(OH)2 and 2% CHX. G5:combination of Ca(OH)2 and 2.5% NaOCl. 10 samples from each group had been inoculated with streptococcus spp. and the other 10 had been inoculated with klebsiella spp. Microbial growth was verified and number of plates which show growth or no growth for bacteria were counted and analyzed statistically. As a result Ca(OH)2 and 2.5% NaOCl had antibacterial effect on both tested bacteria while 2% CHX appeared to be less effective. Pastes of Ca(OH)2 and 2% CHX were effective on klebsiella spp., while mixing of Ca(OH)2 with 2.5% NaOCl had significant effect on both types of bacteria and it was more effective against streptococcus spp.

المحاضرات

5

الأخبار والإعلانات

7
الأخبار 2019-05-08

حضور مؤتمر

مؤتمر جمعية حشوات الجذور البريطانية

الأخبار 2019-05-08

الحصول على جائزة

جائزة افضل ملصق للعرض البحثي لطلبة الدراسات العليا في طب الاسنان لجامعة مانشستر

الأخبار 2019-05-08

حضور مؤتمر

المؤتمر البريطاني السنوي الثاني للدراسات الاولية في طب الاسنان

الأخبار 2019-05-08

المشاركة في مؤتمر

مؤئمر مركز جامعة مانشستر لمركز المكرسكوب الالكتروني

الأخبار 2019-05-08

المشاركة في مؤتمر

المؤتمر السنوي لبحوث الدراسات العليا في جامعة سالفورد

الأخبار 2019-05-08

مقيم

تقيم اداء طلبة المرحلة المنتهية خلال القاءهم لبحوث التخرج

الأخبار 2019-05-08

ممتحن

المشاركة كممتحن للطلاب في امتحان ال BDS OSCE

عرض التفاصيل