مواقع التدريسيينجامعة الكوفة
سها عبد المنعم حميد الدراجي
مدرس مساعد

سها عبد المنعم حميد الدراجي

English Version
0بحث منشور
0اهتمام بحثي

الملف الشخصي

حاصلة على شهادة البكلوريوس في الهندسة المدنية من جامعة بغداد، 1998.

حاصلة على شهادة الماجستير في هندسة جيوتكنك من جامعة ازاد / علوم تحقيقات، 2023.

نشرت مجموعة بحوث في مجلات ومؤتمرات مصنفة في سكوبس.

الاهتمامات البحثية

2

البحوث المنشورة

6
2025

Void ratio change for nanoclay-treated gypsiferous sand under stress- curing-soaking combination

الباحثونSuha A. H. Aldarraji، Navid Ganjian
المجلةAIP Conference Proceedings
التاريخ2025-02-01
مختصر البحث

The recent work investigate the combined effect of pre-test curing and soaking at various durations on the volume change of gypseous sand soil treated with varying percentages of nanoclay. The tests are performed on a soil sample from northern district in Al-Najaf city, Iraq. The soil sample is disturbed and remolded in the Oedometer cell. The remolded specimen will be at 90% of the maximum dry density from the standard Proctor test. Four data sets related to the percentages of adding nanoclay, 0, 3, 6 and 12 %. Each data set includes three groups of pre-test curing periods (Tc), 0, 1 and 4 days and for different soaking periods (Ts), 0, 1, 3 and 7 days. For each tested specimen, a gradual incremental normal stress is applied, i.e., 50, 100, 200, and 400 kPa. The unload trend is investigated by unloading at 200 and 100 kPa. The e-log curves for the different investigated parameters are produced and compared. There is obviously a decrease in compressibility with adding the nanoclay. Whereas the 6% nanoclay is the most valuable decrease. This performance of the soil specimens may be attributed to the decrease in gypsum dissolution caused by the nanoclay. Generally, there is a decrease in void ration change with the advancement of the curing duration.

2025

Effect of Nanoclay-Depended Treatment on the Mechanical Behavior of a Collapsible Soil

الباحثونBilal Muiassar M. Salih، Hind Nadhum Raheem, Mustafa Jamal, Mohammed Shakir Mahmood and Suha A. H. AldarrajiSuha A. H. Aldarraji
المجلةJournal of Rehabilitation in Civil Engineering
التاريخ2025-11-01
مختصر البحث

The research investigates the effects of adding nanoclay on the shear strength properties of two gypseous sand soils. The soil samples were taken from the cities of Tikrit (55% gypsum) and Al-Najaf (29% gypsum). A direct shear test was used to examine soil specimens in dry conditions and immediately after a saturation procedure. The distributed soil specimens were remolded in the direct shear box to achieve a specific density. The shear speed was 1.0 mm/min. For both soil samples, there are different added nanoclay contents, 0, 2, 5, and 7%. Three levels of normal stress are applied, 25, 50, and 100 kPa on each soil specimen. The results state that there is a significant decrease in the angle of internal friction with saturation for both soil samples due to the gypsum solution in these soils. The resulting saturated F is significantly lower than the reported mean values in the literature. The F is recovered by adding nanoclay content up to 5% worthily. A mathematical model correlates the values of F and the percentage of nanoclay using a regression analysis with restricting gypsum content (29-55%) and nanoclay (≥ 0%) in saturation conditions.

2024

Interaction of Curing and Soaking on Collapse Potential of Nanoclay- Treated Soil

الباحثونSuha A. H. Aldarraji، Navid Ganjian
المجلةJournal of Engineering and Sustainable Development
التاريخ2024-01-07
مختصر البحث

Article Info Abstract Received 15/10/2023 This study examines the combined impact of pre-test curing and soaking periods on the soil's resistance to collapse those results from treating gypseous sand with varying amounts of nanoclay. The soil comes from the Iraqi city of Najaf. The soil sample is mainly sand. The nanoclay named "Montmorillonite K10" is used, and it is non-toxic. The tests are performed with a computerized Oedometer. The collapse potential is estimated according to a single Oedometer test (SOT), where the specimens are initially dry and then soaked under a stress level of 200 kPa. Four data sets related to the percentages of 0, 3, 6, and 12% nanoclay are used. Each data set comprises three groups of pre-tests for curing duration and different soaking durations. All experiments have a constant initial dry density of 1.64 g/cm3, water moisture of 3%, and gypsum content of 29%. The findings of this study show that the collapse potential (CP) of natural soil specimens decreases as the pre-test curing time increases. Generally, there is a decrease in CP due to adding the nanoclay and 6% of the nanoclay exhibited the highest reduction in CP. Also, there is an increase in the pre-test curing for the nanoclay-treated soil specimens, which leads to an increase in the CP related to the no-curing state.

2024

Mechanical Behavior of Pre-Test-Curing Nanoclay-Treated Gypseous Sand

الباحثونSuha A. H. Aldarraji، Navid Ganjian and Mohammed Shakir Mahmood
المجلةBIO Web of Conferences, Volume 97
التاريخ2024-01-04
مختصر البحث

This work investigates the effect of pre-test curing at various durations on the stress-settlement of gypseous sand soil treated with varying percentages of nanoclay. The tests are performed on a soil sample from Al-Jameh district in northern Al-Najaf city, Iraq. The soil sample is disturbed and remolded in the Oedometer cell. The remolded specimen will be at 90% of the maximum dry density from the standard Proctor test. Four data sets related to the percentages of adding nanoclay, 0, 3, 6 and 12 %. Each data set includes three groups of pre-test curing periods (Tc), 0, 1 and 4 days. For each tested specimen, a gradual incremental normal stress is applied, i.e., 50, 100 and 200 kPa. For the soil without nanoclay, it was an interesting result for the performance under all vertical stresses that there is a slight decrease in the final settlement. This situation may be attributed to the re-bonded of the particles by the gypsum during the curing time. There was a clear decrease in the final settlement for the nanoclay-treated soil specimens compared to the natural state of the soil (without nanoclay). While a significant decrease in settlement is recorded for specimens with nanoclay (NC) of 6%, which is the best percentage of nanoclay.

2024

Investigation of the Brittleness and Sensitivity of the Gypseous Sand Improved by Nano-clay

الباحثونMustafa Jamal، Rula Fuad Ibrahim, Bilal Muiassar M. Salih, Mohammed Shakir Mahmood and Suha A. H. AldarrajiSuha A. H. Aldarraji
المجلةEngineering, Technology & Applied Science Research (ETASR)
التاريخ2024-12-01
مختصر البحث

This study examines the brittleness index and sensitivity ratio of two gypseous sand soils under saturation conditions improved by nano-clay. The soil samples were obtained from the cities of Al-Najaf and Tikrit containing 29% and 55% gypsum, respectively. The tests were performed on remolded specimens in a direct shear box. The soil specimens were examined mainly under saturated conditions for both different soil and nano-clay contents (0, 2, 5, and 7 %) under three normal stress levels: 25, 50, and 100 kPa. Additional tests were performed under dry soil conditions for comparison. The calculations of the brittleness index and sensitivity ratio of the saturated soil specimens were dependent on the newly suggested definitions of the peak values of the shear stress. The tP is the peak value in the dry condition, whereas the tR is the peak value in the saturation condition. The results emphasize that the values of the brittleness index and sensitivity ratio require more attention to the possibility that the soil is brittle owing to increased gypsum dissolution and the demolition of the soil structure. The brittleness index and sensitivity ratio increased with increasing gypsum content and decreased with increasing nano-clay content and average stress levels. The optimum percentage of nano-clay for both soil specimens was found to be 5%.

2023

Evaluation of curing time on Gypsiferous soil improved by nano-clay

الباحثونSuha A. H. Aldarraji
المجلةMSc Thesis – Islamic Azad University, Science and Research Branch, Iran
مختصر البحث

In problematic soils, the wetting process has a significant effect on their properties and behavior. The design and implementation of structures is faced with many problems due to the possibility of the presence of impurities in problematic soils that can affect the behavior of these soils. Among these impurities is limestone or gypsum, which can be due to the presence of stones of limestone or gypsum origin in the region. Soil nanoparticles with a size usually between 1 and 100 nm are the smallest particles in soil environments. Due to their small size, they have a very high specific surface area. Therefore, they react and dissolve very actively with other soil particles. Due to having this very high specific area and surface charges, even if these particles are used very little in the soil environment, they affect the physical-chemical behavior and engineering properties of the soil in a special and significant way. The amount and type of nanomaterials added to the soil can have a positive or negative effect on the desired amount. But the use of a suitable percentage of nanoparticles leads to the improvement of soil characteristics. In the current research, the effects of adding nanoclay (NC) with different percentages and different curing times (Tc) on the collapse potential (CP) of the gypsum sand soil samples of Al-Najaf, Iraq are investigated. Molded nanoclay-soil samples will be studied for different periods of time before the collapse potential tests and then after the saturation process (Ts). The tested samples were taken from the city of Najaf in Iraq. Samples with 29% gypsum were removed and tested with 90% of maximum dry density. In general, there is a decrease in collapse potential (CP) due to the addition of nanoclay, and 6% of nanoclay showed the greatest decrease in CP. An increase in the pre-test workability for soil samples treated with nanoclay leads to an increase in CP related to the condition without workability. The combined effect of processing and soaking is understood.

عرض التفاصيل