مواقع التدريسيينجامعة الكوفة
0Publications
0Lectures

About

BSc 2001 Civil Engineering University of Kufa
MSc 2004 Construction Materials -University of Babylon

Publications

4
2020

Behavior of Concrete Containing Waste Iron and Crushed Igneous Rocks Modifying With Waterproof Admixture and Polymers

AuthorsRawa Shakir Muwashee, Qusay Abdlhameed Hamid Athab Al-Jameel
JournalConference: IconMeas 2019
Abstract

This study tries to focus on some of the mechanical properties of concrete containing recycled aggregate which uses waste iron as fine aggregate and waste gabbro rock as coarse aggregate. They replacement of two materials are from 0% to 100%. This study also demonstrates that the compressive strength increases from 40.2MPa to 51.8MPa at 75% replacement of fine and coarse aggregate and the flexural strength increases from 3.1 to 8.9MPa. Furthermore, it was found that less absorption for the concrete obtained using recycled aggregate because of less voids in such concrete and that means high durability concrete in same time and that attributed by high durable igneous gabbro rock. This rock has high density, strength and hardness and also very low water absorption. The study also includes modifying waste aggregate concrete with waterproof admixture and styrene butadiene polymers which increased the strength and decrease the absorption especially after 75% replacement of coarse and fine aggregates.

2018

Investigating the Behavior of Mortar and Concrete Reinforced with Aluminum Waste Strips

AuthorsRawa Shakir Muwashee, Hamid Athab Al-Jameel Qusay Abdalhameed Jabal
JournalInternational Journal of Engineering and Technology
Abstract

Composite concrete such as fiber reinforced concrete is widely used in structures because of its excellent properties such as compressive, flexural and tensile strengths and also high modulus of elasticity because it gives lower strain values under loading and too fewer cracks propagation. In this study, Aluminum was prepared by cutting the cans of Coca- Cola cans as fibers in concrete. This used Aluminum strip is low density and less cost in addition to good tensile strength (about 310 MPa) and also has a good ductility. The results of this study show good improvements in compressive, tensile and flexural strengths using 117 tested specimens for both concrete and mortar. In brief, about 22 % increment in compressive strength of Aluminum strip concrete and flexural strength increases from 3.31 MPa to 11.20 MPa when using Aluminum strips with 2.5 % by volume of concrete. The reinforced mortar with Aluminum strips demonstrates significant increments which are 27% for compressive strength and more than 100% for both flexural and tensile strengths comparing with reference mix.

2018

Mechanical properties of polyvinylacetate (pva) concrete improved with silica fume

AuthorsRawa Shakir Muwashee
Journalhttp://www.iaeme.com/IJCIET/[email protected] Journal of Civil Engineering a
Abstract

A polymer is one of the admixtures used in concrete to improve the mechanical properties. However, it reduces the value of modulus of elasticity. This study investigates the way to improve this property as well as the flexural behavior and compressive strength. The results show that using only polyvinyl-acetate admixture improves flexural and compressive strength of normal mix 1:1.8:3.6 and rich mixes (1:1:2) (cement: sand: coarse aggregates) only but decreases the modulus of elasticity values. The results also show that using silica fume powder with polyvinylacetate (PVA) emulsion leads to rise in modulus of elasticity that decreased with using PVA only, and it improves the ordinary mixes from about 20291 to 25800 MPa when 5% PVA is used and this is a very good improvement.

2017

Effect of Used Cooking Oil on the characteristics of concrete including gap-graded aggregate

AuthorsRawa Shakir Muwashee
JournalJournal of Construction Engineering, Technology & Management
Abstract

Due to large amounts, more than one billion gallons, of used cooking oil which are produced yearly, there is a need to carry out the sustainability for construction materials. This study aims to investigate the effect of Used Cooking Oil (UCO) on the fresh and hardened properties of concrete using different percentages from this oil with gap-graded aggregate. Ten concrete mixes were conducted in the laboratory for two mixing proportion (1:1.5:3) and (1:2:4) with a constant W/C equal to 0.5. This study is concentrated on the influence of UCO on the compressive strength, splitting tensile strength, flexural strength, density, and absorption. The results demonstrate that noticeable increments in the recorded slump values as the ratio of UCO used in this work raised gradually. Based on the results of compressive strength test, the existence of UCO as an admixture in concrete leads to a reduction in the compressive strength and this reduction increases with the increase of UCO ratio. Other concrete properties including splitting strength and flexural strength, indicated trends are similar to that observed in compressive strength for all proportions of UCO. Regarding to the density and absorption, the presence of UCO as an admixture in concrete leads to slightly decrease in the density for both series of mixes and this reduction increases with the increment in the percentage of UCO. While for absorption, displays increment due to the increase in the UCO proportion.

Lectures

4
View details