Lithium drop CuO composites synthesis and applications in adsorption.
AuthorsNuha Abdul-Saheb Ridha, Noor Mustafa Kamal , Ahmed Neamah Thamer Al-Yasiri, Shaymaa Hamzah Daylee
JournalApplied Chemical Engineering
Date2025-12-09
AbstractThe co-precipitation method was used to synthesize lithium-doped copper oxide nanocomposites. Several techniques analyze these materials. X-ray diffraction was used to assess the crystal structure and nanoscale dimensions. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) determined the elemental composition. The study also examined the effectiveness of the CuO-LiO nanocomposite in adsorbing blue crystalline dye from an aqueous solution. Adsorption was tested using UV-Vis spectroscopy with an equilibrium time of 30 min and a surface weight of 0.015 g. Results showed that the adsorption percentage ranged from 19.5% to 48% at temperatures between 298 and 323 K. The thermodynamic functions ΔH, ΔG, and ΔS were calculated to determine the effect of temperature, revealing an endothermic adsorption process.
Study the thermal dynamics of calcon dye adsorption on surfaces of natural materials
AuthorsNoor Mustafa Kamal
JournalAl-Qadisiyah Journal Of Pure Science
AbstractTheresearch includes a study of the thermal dynamics of calcon dyeadsorption, by using Ultra-violetvisible spectroscopy technique ,Temperature has been investigated at (298-328k), The results obtained
indicate that the adsorption of Calcon dye, increase with increase of temperature, In the other words, the
adsorption process is endothermic and ΔH is positive. The effect of the acid function was also studied, the
results obtained were follows according to the sequence :pH: 7 > 9 > 5
Removal of Alizarin yellow dye from aqueous solution by adsorption on the pomegranate crusts
AuthorsNoor Mustafa Kama, Nuha Abdul-Saheb Ridha, Lamia A. Rusin and Mustafa bdulkadhim Hussei
JournalIOP Conference Series: Materials Science and Engineering
AbstractThe aim of this research was to preserve the natural materials in the removal of
organic or inorganic pollutants, where the study of removing Alizarin yellow dye from its
water solution using pomegranate treated as chemically, the best time of adsorption was 45
minutes and the best weight of adsorption is 0.9 g which gave the rate of adsorption and The
effect of some functions, including acidic function, temperature and isothermal adsorption, was
studied. as for this interaction
Thermalstability and Photostability of new Azo dye
AuthorsHana,a Kadhem Egzar, , Noor Mustafa Kamal, Hana,a Adii Ali , and Muthana Saleh Mashkour
JournalInternational Journal of Scientific and Research Publications
AbstractIn this work Azo dye {(2,2'
-(3,3'
-dimethylbiphenyl-4,4'
-diyl) bis (1-(2-hydrazinyl-3,5-dinitrophenyl)diazene)} have been
prepared and characterized by, spectorphotometric method UV-Vis, FT-IR spectrum and 1
H-NMR spectrum. The absorption maxima
was observed in the 464 nm, Thermogravimetric(TG) and differential scanning calorimetry (DSC) of this compound was measured,
The photostability of azo dye in water occurred under UV irradiation processes. Dyeing process has on the dye prepared it gave good
results. we have found that the colors of cotton fabrics after dyeing was orange
Removal of Amaranth Dye from aqueous Solution
using Pomegranate Peel
AuthorsHana,
a Adii Ali, Hana,
a Kadhem Egzar , Noor Mustafa Kamal, Naha abdulsaheb and Muthana
Saleh Mashkour
JournalInternational Journal of Basic & Applied Sciences
AbstractPomegranate peel was tested for its ability to
adsorb amaranth dye from solutions with alterations in the
parameters such as pH, contact time, sorbent weight, and
temperature. The adsorption process was analyzed on the basis
of pseudo-first-order, pseudo-second-order kinetic models and
also by Freundlich and Langmuir isotherm models. The
maximum adsorption capacity for pomegranate peel as
calculated by Langmuir model was found to be 3.448mg/g and
3.560 g\ L at 25°C. Thermodynamic parameters such as the
changes of free energy, enthalpy, and entropy were also
evaluated. The results indicated that the sorption amaranth
dye onto the pomegranate peel was an endothermic process
that could be well fitted with the Langmuir adsorption model
and pseudo-second-order kinetic model.
Studies on Photokilling of Bacteria by ZnO
Suspension
HANAA
AuthorsHANAA ADAY1, HANAA KADTEM1 , NOOR MUSTAFA1,HAZEM AZEEZ NAJE2
and MUTHANA SALEH MASHKOUR1
JournalInternational Journal of Engineering & Technology
AbstractIn this work we tried to establish the
photokilling effect of zinc oxide photocatalyst on some type of
bacteria. Photocatalytic disinfection reaction under UV-light in
presence of zinc oxide (ZnO) in aqueous solution has been
investigated. This method is effective for killing bacillus subtilis,
pseudomonas sp. and salmonella bacteria in water. ZnO
semiconductor exhibits strong bacterial activity .The aim of this
research is to design a new photo bioreactor and its application
to sterilize the water from bacteria .
Primary experiments have been done to determined the
optimum conditions which lead to high killing efficiency of
bacteria in aqueous solution . The results showed that the
bacterial effect of ZnO under UV- light irradiation on bacterial
suspension was much higher than without using ZnO .The
photocatalytic reactions were carried out with various ZnO
weights. The highest photocatalytic bacillus and salmonella
photokilling rate was obtained at 0.3g ZnO weight and at 0.4g
for pseudomonas sp. The effect of pH on removal of bacteria was
studied and the photocatalytic photokilling of three type of
bacteria was obtained at acidic pH .