مواقع التدريسيينجامعة الكوفة
Nada Abdlameer Jawad Al- Hakani
Assistant Lecturer

Nada Abdlameer Jawad Al- Hakani

0Publications
0Lectures
0News

About

Bachelor's degree in General Physics - University of Kufa - College of Education for Girls, 1997-1998
Master's degree in Nanotechnology Physics - University of Kashan, 2017-2018
PhD student in Nanotechnology at Isfahan University from 2022 to date
Worked as a chair and member of several college committees, including responsibilities such as calculating graduate GPAs, calculating degree equivalency for failed students, regulating uniforms, discussing student graduation research, taking inventory of the college's warehouse, implementing the standards of the Dental Colleges Improvement Council, educational guidance, and liaison, among other committees
Membership in an examination and audit committee for three years
Participation in quality committees for academic program accreditation and institutional accreditation

Publications

3
2025

A Comparative Study Between Manual vs. Electric Dental Anesthesia

AuthorsNada Abdlameer Jawad
JournalIJMSDH
Date2025-08-12
Abstract

Abstract Electric Dental Anesthesia (EDA) defined as a technique that achieving a local anesthesia by applying of “Transcutaneous Electrical Nerve Stimulation” (TENS). TENS first discovered in 1970s and introduced as “alleviate chronic pain” (intractable cancer pain, Phantom pain, back pain, …) and the acute pain in addition to find the utilities in areas of the sports medicine. The study aims to compare the effectiveness, onset time, and patient comfort levels between manual and electric dental anesthesia. It is hypothesized that electric anesthesia provides faster onset, lower pain perception, and higher patient satisfaction compared to manual methods. Despite the benefits, electronic anesthesia may have limitations including cost, equipment availability, and operator training requirements. However, its potential to improve patient experience and reduce failure-related complications justifies further investment and adoption in clinical practice.

2021

Assessing Fracture Resistance of Restored Premolars with Novel Composite Materials: An In Vitro Study

AuthorsZahraa Abdulaali Al-Ibraheemi, Huda Abbas Abdullah , 2 Nada Abdlameer Jawad , 1 and Julfikar Haider
JournalInternational Journal of Dentistry
Date2021-08-21
Abstract

During restorative treatment, premolars restored with resin filling materials using the conventional incremental-fill technique take longer restoration time and undermine the integrity of the tooth. +e aim of this study was to assess fracture resistance of premolars restored by various types of novel bulk-fill composite resin materials. Forty-eight (n � 48) freshly extracted sound maxillary first premolars were used in this in vitro study. +e teeth were divided into six groups, each having 8 specimens. Group A (positive control) was allocated for the intact teeth. For specimens in Groups B to F, a large cavity (Class-II MOD) was prepared with a standardized dimension of cavity (3 mm depth on the pulpal floor, 4 mm at the gingival seat, and 3 mm cavity width). Group B represented prepared teeth without any restoration. Group C, Group D, Group E, and Group F were restored with Tetric EvoCeram® incremental-fill (conventional), Beautifil bulk-fill, Filtek posterior bulk-fill, and SonicFill 2 bulk-fill restorative materials, respectively. All samples were finished and polished with an enhanced finishing kit and stored in distilled water for a month before the fracture resistance testing. All the samples were exposed to the axial loading (the speed of crosshead was 1 mm/ min) in a computer-controlled universal testing machine (LARYEE, China) via a steel bar (6 mm in diameter) and the maximum applied force in Newton was recorded as the fracture resistance. One-way analysis of variance (SPSS 21) was used to compare the fracture resistance within the groups, and Tukey’s post hoc test was used to determine the difference between the groups. +e lowest value of fracture resistance was recorded for Group B, and the highest value was recorded for Group A followed by the values of Group D, Group C, Group F, and Group E. One-way ANOVA revealed a statistically significant difference between the groups (P < 0.05). Nonsignificant difference was found between the premolars restored by bulk-fill and conventional composites. Among the bulk-fill restored specimens, Beautifil restorative demonstrated significantly higher fracture resistance in comparison with the other two bulk-fill restored specimen groups (SonicFill 2 and Filtek). Bulk-fill composite such as Beautifil could be an alternative option to conventional incremental-fill composite for premolar restoration.

2018

Evaluating Color Stability, Surface Roughness and Water Sorption of Nano – FiltekTMZ250XT Composite and Micro-Hybrid - FiltekTMZ250 Composite (A Comparative Study)

Authorsندى عبدالامير جواد, أ.د.عباس فيصل الحويزي أ.د.محمد الماسي
Journalطهران
Abstract

Abstract: To compare physical properties of two composite materials that differs in their filler size, amount and resin matrix Z250 (microhybrid), Z250XT (nanohybrid). The properties are color stability, surface roughness and water sorption, and to correlate between both characteristics. The resin composites tested were Z250 (microhybrid) and Z250XT (nanohybrid), and. A total of 36 discs (6mm diameter x 2mm thickness). All specimens were divided into 3 groups (n=12). Each group was then subdivided into 2 equal subgroups according to the type fabricated by using Wax mold, shade A2 was used for every material. Each 6 specimens from each composite type were used for the Color of the specimens was measured with a colorimeter CIE standard illuminant D65 at baseline, after staining. The specimens were immersed in staining solutions green tea, the staining was measured, Each 6 specimens from each composite type were used for the surface roughness measurements, the specimens were examined by Atomic force microscopy device (AFM). The surface roughness was measured, Each 6 specimens from each composite type after their preparation were transferred to a desiccator with silica gel maintained at 37˚C, using calibrated electronic microbalance. The weight measurements were taken from the second day (48 hours) after incubation and continue as one measurement every week for 30 days. The results were taken and statistical analysis was performed using statistical software followed by ANOVA, To estimate the correlation between both material. For the groups before and after staining .surface roughness, water sorption there was a significant increase in staining, water sorption in Z250XT, with time more than Z250, but non-significant in surface roughness between Z250XT and Z250 , and no correlation between them. It can be concluded from this study that the Z250 has a positive effect on the staining and water sorption, and no their affection in surface roughness. Keywords: Composite, FiltekTM Z250 XT, Staining, surface roughness, water sorption.

Lectures

4

Visual Tests

فيزياء طبية

Accommodation test

فيزياء طبية

word

حاسبات

Excel

حاسبات

News & Announcements

3
News 2025-09-28

A scientific visit to the Faculty of Medicine at our university

On 3/26/2025 AD, the teaching staff took the second-year students to the anatomy lab in the Faculty of Medicine at our university to enhance their knowledge of cadavers and gain more exclusive information from the Faculty of Medicine in this field.

News 2025-09-28

Volunteer work

Some of our college instructors, including M.Sc. Nada Abdul Amir Jawad, purchased laboratory equipment for the Medical Physics Laboratory on 3/18/2025, to support the laboratory with equipment for the benefit of students.

News 2025-09-28

Scientific poster (volunteer work)

A poster titled (Elements of the Post-Exposure Control Plan / Immediate Response to Exposure) was created for the purpose of scientific benefit, through a donation from the teaching staff, including M.E. Nada Abdul Amir Jawad, and with the participation of the students.

View details