مواقع التدريسيينجامعة الكوفة
0Publications
0Interests

About

Karrar Shakir Muttair received a B.Sc. degree from the Islamic University/ Iraq in 2016 in the field of Computer Techniques Engineering / Computer Communications Networks. He worked at the same University up to 2017 as a laboratory Engineer. He was awarded an M.Sc. degree from Middle Technique University / Electrical Engineering Technical College/ Baghdad in 2019 in the same field of specialization. Through those periods and up to now, he worked as a Lecturer in the field of Computer Communications Networks. He published several types of research in the field of Communications Engineering. He currently teaches & conducts research programs in the areas of software computer networks and communications. He has been awarded several awards and certificates of thanks and appreciation in the field of his work. His research interests are Computer Techniques Engineering, Computer Communications Networks, Multimedia Learning, Antennas, Indoor & Outdoor Wireless Networks, Wireless Sensor Networks, and Mobile Learning.

Research Interests

5

Publications

15
2020

Outdoor to Indoor Wireless Propagation Simulation Model for 5G Band Frequencies

AuthorsKarrar Shakir Muttair, Oras A Shareef, Mahmood F Mosleh
JournalIOP Conference Series: Materials Science and Engineering
Date2020-02-01
Abstract

This paper analyses the signals propagation characteristics and the most important obstacles that encountered these signals when transmitted from outdoor to indoor (O2I) antennas for the college buildings. These buildings consists of several floors and built in the 3D form according to the real dimensions. In this study, we used measurement analysis and a ray-tracing simulation model approach based on the use of the Wireless InSite (WI) software. The use of different frequencies related to the fifth generation (5G) which are 10, 17, 30 and 60 GHz. According to the results that appeared, it is observed the increase in frequency will lead to an increase in path loss, decrease the received signal strength (RSS). There is an inverse relationship between frequency increase and delay spread and an inverse relationship between frequency increase and received power. In addition, we noticed that there is a direct correlation between frequency increase and path loss, where increasing frequency will increase the path loss, decrease delay spread and received power. Finally, the building's barriers work on obstructing the direction of the signals path and dispersion of the received signal strength (RSS).

2022

Dual-band MIMO antenna with defected ground structure for sub-6 GHz 5G applications

AuthorsKarrar Shakir Muttair, Ahmed MA Sabaawi, Oras A Al-Ani, Qusai H Sultan
JournalProgress In Electromagnetics Research C
Date2022-05-01
Abstract

In this work, a dual-band compact MIMO antenna for sub-6 GHz 5G applications has been designed, simulated, and implemented. Firstly, a single patch antenna was designed and simulated, and its dimensions were adjusted to exhibit a dual band performance at 3.6 GHz and 5.9 GHz. A twoelement MIMO structure was then designed with a defected ground structure, and the S-parameters were recorded. The results showed that the designed MIMO antenna exhibited multiband performance at the sub-6G frequency band with almost omnidirectional radiation pattern and acceptable gain. The achieved results are promising, making the proposed antenna a good candidate for 5G applications. The proposed antennas were fabricated, and their basic parameters such as return loss and radiation pattern were tested experimentally and compared with simulation results. An acceptable agreement was achieved between measurement and simulation results.

2022

A novel design of wide and multi-bands 2×2 multiple-input multiple-output antenna for 5G mm-wave applications

AuthorsKarrar Shakir Muttair, Ali Zuhair Ghazi Zahid, Oras Ahmed Shareef, Ahmed Mohammed Qasim Kamil, Mahmood Farhan Mosleh
JournalInternational Journal of Electrical and Computer Engineering (IJECE)
Date2022-08-01
Abstract

In this paper, we present a new design for a multiple-input multiple-output (MIMO) antenna with four ports operating in wide and multi-millimeter-wave (Mm-Wave) bands for various 5G applications (including the internet of things (IoT), communication devices, and smartphones). The antenna is designed in a rectangular zigzag shape with slots to make the antenna operate at different frequencies. For this, the antenna operates at multiple frequencies from 38 to 62 GHz, so it supports all advanced wireless communication applications. The most important characteristic of the design is its small size and compact structure compared to designs presented by researchers in previous literature so the antenna dimensions for four elements are 29×49 mm2. The antenna performance based on the results obtained from CST Studio Suite is good since the reflection coefficients of the antenna resonate at six main frequencies are 39.128 GHz, 42.992 GHz, 47.384 GHz, 51.536 GHz, 55.472 GHz, and 59.288 GHz. In addition, the isolation value between all antenna elements is ≤30 dB and the diversity gain value for all frequencies is 10 dB. Moreover, a very small value was obtained for the envelope correlation coefficient (ECC) is <4.0576×10−11. Finally, the results indicate a favorable design and potential competitor for all 5G MIMO Mm-Wave applications.

2021

A New Design of mm-Wave MIMO Antenna with High Isolation for 5G Applications

AuthorsKarrar Shakir Muttair, Ali Z. Ghazi Zahid, Oras A. Al-Ani, Ahmed M. Q. AL-Asadi, Mahmood F. Mosleh
JournalInternational Journal of Microwave and Optical Technology
Date2021-01-07
Abstract

In this paper, we propose a new design for a four-ports Multiple-Inputs Multiple-Outputs (MIMO) antenna. The main aim behind this work in this paper is to present an antenna with a smaller size compared to the designs presented by researchers in previous works, and it operates in the wide and multi-bands required by most advanced communication systems. The structural scenario of this antenna is square-shaped designed using the CST Studio Suite with real dimensions of 36 mm× 36 mm and a thickness of 1.6 mm. This antenna carries both wide and multi bands and operates in the Millimeter-Wave (mm-Wave) spectrum. This antenna has been designed to be suitable for all the fifth-generation (5G) communication applications. Based on the results obtained from the CST, it is observed that the impedance bandwidth of the MIMO antenna system is from 39 to 75 GHz. In addition, the antenna gave excellent results as each antenna in the MIMO configuration works independently because the isolation ratio among all ports is greater than 24.539 dB, and it reaches 43 dB at a frequency of 71 GHz. Moreover, a set of key performance measures of the MIMO antenna were analyzed, the most important which is the Envelope Correlation Coefficient (ECC) and found that the ECC value is less than 0.00075. So, this value is very small compared to the ECC values that were presented in previous researches.

2019

Outdoor millimeter-wave propagation simulation model for 5G band frequencies

AuthorsKarrar Shakir Muttair, Oras A Sh Al-Ani, Mahmood F Mosleh
JournalIEEE
Date2019-02-13
Abstract

Design and implementation of wireless local area network for the specific region with fifth-generation (5G) networks is one possibility to reach high speed, low power, and low latency. 5G technology is expected to officially launch across the world in the near future. As a contribution, the propagation of millimeter-wave (mm-wave) at different frequencies including 28, 39, 60 and 73 GHz has been studied in this paper. Wireless InSite program has been used to form a deterministic model for outdoor propagation in a specific campus according to the real geometric dimensions. The appropriate location has been identified for the transmitter that has a directional antenna. The surround receivers have been divided and distributed into two groups; the first located in a place without any barriers between them and the transmitter called LOS (Line-of-Sight). In contrast, the second group of the receivers is located in front of barriers that causing multiple reflections which called NLOS (Non-Line-of-Sight). In this paper, simulation of wave propagation has been modeled with including the essential parameters of waves such as path loss, delay spread and received power. Overall, the obtained results show that LOS has a high receiving capacity and fewer path losses than NLOS. In addition to that, we find that high frequencies like 73 GHz have greater effects than low frequencies on the propagation of the waves.

2019

Outdoor transmitter localization using multiscale algorithm

AuthorsKarrar Shakir Muttair, Oras A Shareef Al-Ani, Mahmood F Mosleh
JournalInternational Journal of Simulation: Systems, Science & Technology
Date2019-03-04
Abstract

Current demand for wireless communications is increasing continuously, especially on localization services in determining optimal transmitter location through intelligent wireless communications. Using Received Signal Strength (RSS), the determination of the optimal transmitter location is realized. In this paper, we simulate a model for a case study, where the Wireless InSite program has been used to investigate the wave propagation with the reasonable RSS. Different locations of directional antenna transmitters have been selected to get a better coverage area in the selected case study using multiomnidirectional antenna receivers. An algorithm was formulated using the MATLAB program to determine Average Signal Quality (ASQ), Average Received Power (ARP) and the probability of the best receiver points. We find significant effects of the changing of the location of the transmitter which affected by environment including the presence of barriers and its related material properties.

2022

New ultra-small design and high performance of an 8×8 massive MIMO antenna for future 6G wireless devices

AuthorsKarrar Shakir Muttair, Karrar Khaleel Aljawaheri, Mujtaba Zuhair Ali, Oras Ahmed Shareef, Mahmood Farhan Mosleh
JournalIndonesian Journal of Electrical Engineering and Computer Science
Date2022-10-01
Abstract

The demand for the array antenna that consists of multiple ports has increased in recent years, because of its main importance in reducing noise and interference between users. In this paper, we propose a new method for designing an 8× 8 (16-ports) multi-input and multi-output (MIMO) antenna. This method relied on the Micro Strip mechanism so that we presented a small antenna that operates at wide and multi-bands of millimeter waves (Mm-Waves). According to the information curves generated by the CST experimental software, it was observed that the proposed antenna operates well from 36 to 60 GHz. Therefore, the antenna achieved the best results in terms of many most important parameters, the reflection coefficient is<-10 dB, return loss is<-25 dB, and voltage standing wave ratio (VSWR) is< 2. In addition, the efficiency of the antenna for all frequencies from 70% to 97%, the envelope correlation coefficient (ECC) is< 0.001, and the diversity gain (DG) is 10 dB for all frequencies, while the maximum gain achieved by the antenna is 9 dB at 46 GHz. All these good results achieved by the antenna make it the prominent and potential element in most of the future 6G wireless communication systems.

2022

Design and analysis of wide and multi-bands multi-input multi-output antenna for 5G communications

AuthorsKarrar Shakir Muttair, Ali Zuhair Ghazi Zahid, Oras Ahmed Shareef, Raed Hameed Chyad Alfilh, Ahmed Mohammed Qasim Kamil, Mahmood Farhan Mosleh
JournalIndonesian Journal of Electrical Engineering and Computer Sciences
Date2022-05-03
Abstract

A good antenna design has played an essential role in the design of wireless communication systems, international companies are looking for the best design that suits their products in terms of size, bandwidth, gain, cost, and performance. In this paper, three antenna models are designed for fifthgeneration (5G) communications, the first model is a single antenna, the second model is a two-ports multi-input multi-output (MIMO) antenna, and the third model is a four-ports MIMO antenna. The geometric dimensions of a single antenna are 20× 37× 1.6 mm3, the two-ports antenna dimensions are 44× 37× 1.6 mm3, while the four-ports antenna dimensions are 74× 44× 1.6 mm3. The design of these antennas was based on the latest strategies in terms of their small sizes and operating from 13.5 to 20 GHz in wide and multiple bands to be compatible with all advanced communication devices. Based on the results that emerged, it was noted that the reflection coefficient (S11)<-10 dB and has better isolation between the ports is<-26 dB. While the envelope correlation coefficient (ECC) value is< 1.036× 10-9, and the diversity gain (DG) value is 10 dB. All antennas proposed operate in ultrawideband (UWB) which is very necessary for 5G communications devices.

2024

5G Antenna Appropriate for Smart IoT Applications

AuthorsKarrar Shakir Muttair, Oras Ahmed Shareef, Hazeem Baqir Taher
JournalInternational Journal of Microwave and Optical Technology
Date2024-03-04
Abstract

The increasing need for high-speed telecommunications has motivated extensive research on fifth-generation (5G) technology. Many industries require quick data throughput, low latency, and consistent radiation patterns utilizing 5G techniques. This article proposes an antenna with two simulations and measurements for different 5G applications. It is tiny and operates at a wide frequency range of 1 to 9 GHz, making it suitable for various modern systems. The results obtained from this antenna were superior to those proposed in previous articles. It is observed that the reflection coefficient ratio is much less than-10 dB for both the simulation and measurement sides at all frequencies. In addition, the highest value of the reflection coefficient is-82 dB at 8 GHz. The antenna's maximum gain and efficiency are 9.8 dB and 98%, respectively. Thus, the best antenna performance when measuring the voltage standing wave ratio (VSWR) parameter at 8 GHz is up to 0.3. It has been discovered that the measured radiation pattern is nearly omnidirectional and matches the simulated radiation pattern exactly. The discrepancies between the design proposed and the authors' designs in other recent works are that it is based on a spatial and aperture technique for both the patch and ground layers. Therefore, the antenna achieved good results of wide bandwidth, high efficiency, gain, etc. Furthermore, it has been concluded that the antenna is well-suited for many applications within the 5G Internet of Things (IoT) ecosystem.

2025

Machine Learning Based on Antennas Modeling for 5G and 6G Communication Systems: A Systematic Review

AuthorsKarrar Shakir Muttair, Oras Ahmed Shareef, Hazeem Baqir Taher
JournalInternational Journal of Communication Systems
Date2025-06-01
Abstract

Artificial intelligence (AI)-aided communications have gained significant traction in recent years due to the widespread application of machine learning (ML) and deep learning (DL) machines with algorithms to solve math problems in wireless communications. This study offers an overview of the use of ML models in antenna design and optimization. This incorporates DL on ML frameworks, categories, and structure to get practical and broad insights using ML techniques for high throughput, quick data analysis, and prediction. This article also comprehensively reviews recent research papers on antenna design via ML. This includes an analysis of several ML algorithms that have been applied to produce antenna parameters such as the reflection coefficient (S-parameters), efficiency and gain values, and radiation patterns of the antennas. However, the current antenna design's structure, variables, and external factors remain complex. In addition, the expense of time and processing resources is inescapable and unacceptable to most designers. ML-based antennas have been created to increase antenna modeling efficiency and accuracy to solve these challenges. Techniques for modeling data may be used to predict the performance of an antenna for a certain set of antenna factors of design. As a result, this study highlights the most sophisticated applied ML techniques that have been presented to increase antenna modeling efficiency and accuracy. The results demonstrate that AI, ML, and DL may minimize simulation needs, predict antenna behavior, and reduce time with high accuracy.

2025

A NEW INTELLIGENT DRIVER VIGILANCE SYSTEM DESIGN USING TILT SENSORS

AuthorsKarrar Shakir Muttair, Ali Zuhair Ghazi Zahid, Oras Ahmed Shareef, Abbas Ali Diwan, Hazeem Baqir Taher, Raed Hameed Chyad Alfilh, Ahmed Mahmood Farhan, Mahmood Farhan Mosleh, Faiz Arith
JournalKufa Journal of Engineering
Date2025-01-01
Abstract

A significant number of causes for people killed by automobile accidents on both public and interior roads are the driver's failure to pay attention to the roadway, as well as other factors such as tiredness, sleep during driving, using the phone, or even the driver being intoxicated, etc. This work aims to identify sleepy status, pinpoint the onset of sleep, and alert the driver when their level of alertness drops below a level that does not improve productivity or the vehicle's overall safety protocols to prevent drowsiness-related crashes. In this article, we present a new method for implementing drowsiness detection inexpensively, using a Raspberry Pi as a central processor board that connects all practical measurement components. In addition, the proposed method includes the following activities: tracking the driver's head vibration while driving using tilt sensors. Moreover, a camera was mounted in front of the driver to take photos and record videos of the driver's health. As a result, the results were entirely satisfactory, and if the driver was operating the vehicle while fatigued, the response was 95% reliable and fast.

2023

A Novel Approach to Improving Distributed Deep Neural Networks over Cloud Computing

AuthorsKarrar Shakir Muttair, Muhtada Zuhair Ali
JournalInternational Journal of Interactive Mobile Technologies
Date2023-09-01
Abstract

In recent years, deep distributed neural networks (DDNNs) and neural networks (NN) have excelled in an extensive list of applications. For example, deep convolutional neural networks (DCNNs) are constantly gaining new features in various tasks in computer vision. At the same time, the number of end devices, including Internet of Things (IoT) devices has increased prominently. These devices are attractive targets for machine learning applications because they are often directly connected to sensors. For example (cameras, microphones, and gyroscopes) that record large amounts of input data in a stream mode. This study presents the design of a DDNN with end devices, edges, and clouds that spans computer hierarchies. The idea presented is considered one of the new ideas because it depends on two layers to distinguish, namely the convolutional layer and the pooling layer. The main objective behind using these two layers in one proposal is to provide and obtain the best results. Finally, we discovered that the proposed technique produced the best results in terms of accuracy and cost, with the precision of the definition reaching 99 % and the cost being quite affordable at 25. As a result, we conclude that these results are far superior to those achieved by the researchers in their ideas provided in previous recent literature.

2024

Designs, developments, challenges, and fabrication materials for MIMO antennas with various 5G and 6G applications: a review

AuthorsKarrar Shakir Muttair, Oras Ahmed Shareef, Hazeem Baqir Taher
JournalInternational Journal of Microwave and Wireless Technologies
Date2024-11-01
Abstract

The rapid expansion of digital media platforms and their growing user base in the wireless industry necessitate communication systems to provide information at high speeds with reliable connections. Therefore, wireless communication systems with a single antenna cannot accomplish these requirements. Consequently, the access and utilization of multi-input multi-output (MIMO) antennas are becoming more common in contemporary high-speed transmission systems. This article covers the fundamentals of MIMO antenna operation, the metrics for MIMO antenna performance parameters, and the design methodologies for specifying the three most commonly used antennas (two-port, quad-port, and eight-port). Additionally, it discusses their ability to improve channel capacity significantly. It focuses on designing MIMO antennas with ultra-wideband (UWB) for 5G systems operating between 1 and 27 GHz and millimeter-wave (mmWave) bands from 30 to 100 GHz. This article is valuable for researchers interested in developing MIMO antennas for diverse applications. It compiles advanced methods related to materials, advancements, challenges, and state-of-the-art technologies used in the design of high-performance MIMO antennas. We concluded that antennas that operate at mmWave frequencies have small dimensions and suffer from isolation problems in the MIMO formation. In contrast, antennas operating below 6 GHz are large and do not suffer from isolation problems.

2024

A New Geometry of Multi-band MIMO Antenna for 5G and 6G Systems

AuthorsKarrar Shakir Muttair, Oras Ahmed Shareef, Hazeem Baqir Taher, Faiz Arith
JournalJournal of Techniques
Date2024-12-31
Abstract

The demand for high-efficiency, small-sized ultrawide-band (UWB) antennas has risen due to the need for fast wireless communication systems. In this manuscript, we propose a novel geometry for a 4-port multi-in multi-out (MIMO) antenna with an L-shaped structure that solves the limitations of current designs in UWB applications. The dimensions and thickness of an antenna design are 18×18×1.5875 mm. It operates in multiple bands, such as Ku, K, and millimeter wave (mmWave) spectrum ranging from 17 to 100 GHz. This feature is ideal for small fifth-generation (5G) and sixth-generation (6G) wireless communication devices. We used two separate ground strips at the bottom to minimize interference in the MIMO element design and enhance antenna performance. The antenna performed exceptionally well in all measured parameters. The reflection coefficient (RC) was less than -10 dB, the mutual coupling (MC) coefficient reached -62.4 dB, and the radiation antenna efficiency ranged between 82% and 94%. It achieved the highest gain of 13 dBi at 87 GHz. In addition, the envelope correlation coefficient (ECC) is < 0.02, and the diversity gain (DG) ranges between 9.9 and 10 dB. This antenna surpasses all others in every parameter when compared to proposals by different researchers. This makes it a superior choice for modern wireless devices catering to 5G and 6G networks.

2022

Design of multi-band millimeter wave antenna for 5G smartphones

AuthorsKarrar Shakir Muttair, Oras Ahmed Shareef, Ahmed Mohammed Ahmed Sabaawi, Mahmood Farhan Mosleh, Mohammad Bashir Almashhdany
JournalInstitute of Advanced Engineering and Science
Date2022-05-01
Abstract

The design of a millimeter wave (mmW) antenna for the 5G mobile applications is presented in this paper. The designed antenna has dimensions of 10× 10× 0.245 mm3. This includes the copper ground plane. The resonance of the proposed mmW antenna lies within the range of 33 GHz and 43 GHz. These frequency bands are covering the 5G proposed band in terms of the signal speed, data transmission, and high spectral efficiencies. Computer simulation technology (CST) software is used to simulate the proposed 5G antenna including the characteristics of S-parameters, gain, and radiation pattern. Simulation results show that the return loss at resonant frequencies goes-22 dB, which satisfies the requirements of 5G mobile technology.

View details