مواقع التدريسيينجامعة الكوفة
حسين مع الله حسين العرباوي
أستاذ مساعد

حسين مع الله حسين العرباوي

English Version
0بحث منشور
0اهتمام بحثي

الملف الشخصي

حاصل على شهادة البكالوريوس في الفيزياء العامة من جامعة بابل عام 2004-2005.
حاصل على شهادة الماجستير في علوم الفيزياء النووية من جامعة بابل عام 2011-2012.
حاصل على شهادة الدكتوراه في علوم فيزياء المواد المكثفة من جامعة تربيت مدرس/طهران عام 2019.
اللقب العلمي مدرس
عملت منذ عام 2019 وحتى عام 2023 تدريسي في قسم الفيزياء الطبية/كلية الحلة الجامعة وتسنمت منصب رئيس قسم الفيزياء الطبية.
اشرفت على عدة مشاريع تخرج لطلبة المرحلة الرابعة.
جميع بحوثي العلمية العملية منشورة في مجلات ضمن مستوعبات سكوباس وكلاريفيت.

الاهتمامات البحثية

3

البحوث المنشورة

19
2026

Bi-doped ZnS nanoparticles: crystal growth, morphology, and optical properties

الباحثونFadhel H. Ali، Hussein A. Madlool; Mohsin K. Al-Khaykanee; Hussein M. Hussein
المجلةNanomaterials and Energy
التاريخ2026-04-03
مختصر البحث

The sol-gel method was used to synthesize Zn1−xBixS compounds (x = 0, 0.25, 0.5, 0.75, and 1) with the aim of studying the structural, morphological, and optical effects of bismuth ions within the crystal lattice of zinc sulfide (ZnS). X-ray diffraction results showed that all samples crystallized in the cubic ZnS phase, with the appearance of a bismuth disulfide secondary phase at higher bismuth (Bi) content. The crystallite size increased from 10.5 nm at x = 0 to 26.7 nm at x = 0.75 and reached 31.6 nm at x = 1, accompanied by a sharp decrease in microstrain from 1.48% to about 0.49%. Field emission scanning electron microscopy images revealed a clear morphological transition from spheroidal ZnS particles to layered, sheet-like particles at higher Bi substitution ratios. Ultraviolet–visible spectrum showed a redshift with a band gap decreasing from 3.95 eV for pure ZnS to 3.59 eV at total substitution (x = 1), attributed to bismuth ions’ 6p energy levels near the conduction band edge, creating surface and electron levels that reduce the electron transition energy. These results demonstrate that the sequential replacement of bismuth provides an effective strategy that tailors the structural, morphological, and optical properties of the ZnS compound, making it a promising candidate for thin-film solar cells and photocatalytic applications.

2026

Tunable Morphologies and Optical Properties of ZnS Nanostructures Doped with Ni, Co, and Mn: A Solvothermal Synthesis Approach

الباحثونFadhel H. Ali، Esraa T. Nasser and Hussein M. Hussein
المجلةJournal of Nanostructures
التاريخ2026-04-01
مختصر البحث

Due to λ > 340 nm of ATC metallation ligands SSF also marks an important event because it was the first synthesized mono-metallic crystalloid with such readiness used generally as organolithium sparepart even now; after Co-rich treatment, obviously. After that the nanostructures were functionally characterized (mainly structure, optical, morphological and magnetic) systematically such as XRD, and FESEM. The results indicated that morphology manipulation plays a critical role in improving the functional properties of ZnS. The dopant-induced enhancement type and extent were largely variable depending on the electronegativity and ionic radii of the dopants, leading to significant variation in lattice parameters, band gap energies as well as light absorption behaviours. Magnetic characterization proved that among the various dopant ions, which facilitated an homogeneous distribution in purified ZnS lattice, improved magnetic behavior and resulted in smaller crystal as well as average grain size of ZnS. The coercively and the remnant magnetization were also increased with this structural refinement than that of pure ZnS. Within the doped forms, individual transition metals contributed unique benefits, resulting in tailored optical and magnetic responses. Finally, the investigations done here emphasized that Ni-, Co- and Mn-doped ZnS nanostructures displayed better multifunctional performance as compared to undoped ZnS, which revealed them as potential material for implementation in optoelectronic device applications. Apparently, the structural stability, improved magnetic properties, and adjustable optical transparency of the Co-Nis make them interesting as potential buffer layer replacements in thin-film solar cells with possible enhancements on device performance coupled with material lifetime.

2026

Boosting photocatalytic efficiency through Zn2+/Cr3+substitution in kesterite Cu2ZnSnS4: A novel nanoscale strategy

الباحثونHussein M Hussein، Nahlah Challob Younus
المجلةMaterials Science and Technology United Kingdom
التاريخ2026-03-25
مختصر البحث

In order to enhance the photocatalytic performance of the Cu2ZnSnS4 compound, an ionic substitution strategy was employed to partially and completely substitute Zn2+ with Cr3+ ions using the solvothermal method. The structural analysis reveals that partial substitution significantly improves the crystallite lattice order without disturbing the kesterite crystal structure, confirming the successful incorporation of chromium into the lattice. Morphological investigations imply the formation of spherically aggregated nanorods-like, which efficiently arise the lively surface area, at the same time as EDS analysis confirms a homogeneous elemental distribution without the formation of secondary phases. Upon comparing the photocatalytic performance of all synthesized compounds using methylene blue dye as a version pollutant, the Cu2Zn0.5Cr0.5SnS4 compound showed the highest degradation efficiency of about 93% within 120 min in visible light irradiation. This more desirable overall performance is attributed to the synergistic outcomes of advanced crystallinity, changed morphology, and enhanced light absorption caused by partial Cr³ substitution. These consequences exhibit that managed ionic substitution represents an effective approach for tailoring the structural and photocatalytic residences of the Cu₂ZnSnS₄ compound-primarily-based substances for environmental remediation packages.

2026

Band gap engineering in Cu2FeSnS4nanostructures via single (Ag) and co-substitution (Ag–Mn): Correlating structure, morphology, and optical properties

الباحثون Rawaa Majid Thamer، Hussein M. Hussein
المجلةMaterials Science-Poland
التاريخ2026-07-10
مختصر البحث

In this study, a quaternary Cu2FeSnS4 (CFTS) nano-compound was prepared and characterized using the solvothermal method, with partial substitution between copper and silver ions to form the Cu1.8Ag0.2FeSnS4 compound, in addition to a partial co-substitution between iron and manganese ions to form the Cu1.8Ag0.2Fe0.5Mn0.5SnS4 compound. The aim of the study is to compare single doping and co-doping and their effect on structural, optical, and morphological properties. The X-ray diffraction and Raman spectroscopy results showed that all the prepared compounds have a kesterite crystal structure with the absence of secondary phases, while maintaining the crystalline phase during the substitution process, accompanied by a slight change in the crystal lattice constants. Field emission scanning electron microscopy analysis revealed a clear evaluation in nanoparticle morphology with doping and co-doping. Brunauer–Emmett–Teller analysis indicated a decrease in surface area upon doping. It was also observed that there is a gradual decrease in the energy gap accompanied by strong absorption in the visible region when the doping and co-doping process is carried out. According to these results, the authors confirm that co-doping with silver and manganese is an effective strategy for controlling optoelectronic properties. It also has a clear impact on surface properties, which must be considered to balance maintaining an effective surface area with minimizing the energy gap. Therefore, these co-doped compounds are promising candidates for photocatalysis and thin-film solar cell applications.

2025

A competitive candidate for the Cu2ZnSnS4 compound in solar photocatalytic degradation of organic pollutants

الباحثونNahlah Challob Younus، Hussein M. Hussein
المجلةAIMS Materials Science
التاريخ2025-06-10
مختصر البحث

Abstract Full Text(HTML) Download PDF This study focused on preparing and analyzing two sulfide compounds: Cu2ZnSnS4 and Cu2BiSnS4, in order to assess their effectiveness in breaking down pollutants using solar radiation as a photocatalyst method. The results indicated the formation of crystalline phases for both compounds with variations in crystal lattice parameters while closely matching the desired composition ratios. The research also highlighted a nanoparticle morphology with variances in nanoparticle size and distribution observed between the two compounds. The results indicated that both compounds possess an energy gap falling within the visible light spectrum and are thus capable of absorbing radiation effectively. Enough tests under sunlight for photocatalytic purposes demonstrated a superior performance in breaking down organic pollutants with methyl green dye, achieving an 82% degradation efficiency in the Cu2BiSnS4 compound compared to the Cu2ZnSnS4 compound, which exhibited a photodegradation efficiency of 75%, over a similar exposure duration. The distinct disparity in efficiency between the two compounds is from differences in the size and shape of the nanoparticles as well as their distribution and surface characteristics, influencing the movement of charge carriers and light absorption dynamics. According to the findings, the authors suggest that Cu2BiSnS4 shows potential as a catalyst for solar photocatalysis applications due to its unique optical and structural properties, making it an asset in the development of environmentally friendly solutions for water purification and mitigation of environmental pollutants.

2023

Photosensitive analysis of spin coated Cu doped ZnO thin film synthesized by hydrothermal method

الباحثونHussein M. Hussein
المجلةResults in Optics
التاريخ2023-09-26
مختصر البحث

In this study, the effects of the incorporation of Cu into the crystal structure of the ZnO semiconductor on its structural and optoelectrical properties were investigated. The hydrothermal method for the synthesis of Cu-ZnO compounds and the spin-coating technique were used to prepare Cu-ZnO thin films. Copper is observed to have a major influence on the physical properties of the ZnO compound by changing the morphology of the nanoparticles, from rod-like ZnO nanoparticles to flower-like nanoparticles. This effect changes and improves the light sensitivity of the ZnO compound, making it suitable for use as a Cu-ZnO thin window layer in thin-film solar cells. All the crystal structure parameters and optoelectrical properties are further enhanced upon incorporation of Cu into the ZnO compound due to the increased surface defects of the zinc oxide which in turn shifts the optical absorption coefficient towards the visible region.

2023

Structural and Optomagnetic Properties of Ni-Doped ZnS Synthesized by Solvothermal Method

الباحثونHussein M.Hussein
المجلةColloid Journal
التاريخ2023-08-10
مختصر البحث

In recent years, the ZnS compound has attracted great interest for use in thin-film solar cells as a buffer layer. To improve its structural and photovoltaic properties, in turn improving the conversion efficiency of thin-film solar cells, the Ni element was introduced into the host ZnS compound through doping by a solvothermal process. The results reveal that the Ni2+ ion has an impact on the ZnS nanocrystal due to its stronger hybridization than that of the Zn2+ ion. When Ni is incorporated into the host ZnS compound, the crystal structure of the ZnS compound becomes slightly distorted and possesses a novel opto-magnetic feature which results in optimization of the optical properties of the ZnS nanoparticles. Thus, the magnetic energy generated by the doping process is widely distributed over an absorption band in the UV-Vis ranges. Furthermore, the band gap of the ZnS nanocrystal decreases when Ni is incorporated into the ZnS nanocrystal. Additionally, introducing Ni into the ZnS nanoparticles leads to a change in the morphology of the ZnS nanoparticles from spherical-like to flake-like or plate-like particles because the magnetic exchange energy generated by the higher concentration of ferromagnetic Ni ions is accompanied by a lower pressure inside the unit cell due to the smaller ionic radius of the Ni2+ ion compared to that of the Zn2+ ion. The author suggests that incorporating Ni into the host ZnS crystal may enhance the optoelectrical properties of the ZnS compound which is suitable for use as a buffer layer in thin-film solar cells.

2023

Fabricating and Synthesizing Spin Coated CuO Thin Film as Absorber Layer in Optoelectronic Applications

الباحثونHussein M. Hussein
المجلةProtection of Metals and Physical Chemistry of Surfaces
التاريخ2023-07-10
مختصر البحث

CuO thin film has a promising opto-electrical properties which make it used as absorber layer in thin film solar cell. So, in this work, CuO thin film has been synthesized and prepared by precipitation method and spin coating technique. It was observed it has narrow band gap (1.38 eV), high absorption coefficient (5.5 × 104 cm–1), optimum optical conductivity and high refractive index accompanied by low transmittance. XRD pattern is showed CuO nanocrystal has high crystallinity and low disorder which resulted in good optical absorption in the visible region. From SEM, it was observed the morphology of the CuO nanoparticles was rod-like particles which led to improve the opto-electrical properties. I–V curve is showed the current of CuO thin film is (0.6mA) which revels its photo-responsivity under light due to its high absorption coefficient. From the above results, CuO is a good absorber in thin film solar cell.

2022

Comparative Study between Spin Coated Cu2ZnSnS4 and Cu2FeSnS4 Thin Films for Thin-Film Solar Cell Applications

الباحثونH. M. Hussein
المجلةApplied Solar Energy (English translation of Geliotekhnika)
التاريخ2022-09-01
مختصر البحث

In this report a comparative study of two thin films with optimal structural and opto-electrical properties is considered. Crystalline order, amount of defects and the grain size are important parameters which affect the physical properties of thin film. Two thin films of Cu2ZnZnS4 (CZTS) and Cu2FeSnS4 (CFTS) were compared to get the best structural and optoelectrical properties. It was observed after replacing Zn element by the Fe(III) element to obtain CFTS compound, the crystallinity, absorption coefficient, refractive index and other optical properties have been improved resulting in an increase in the polarizability and sensitivity of the CFTS thin film to the UV-Vis spectrum. Experimental results showed that Fe(III) element has stronger hybridization and is more efficient in energy storage than Zn(II) element. The magnetic energy generated by the substitution of the Fe element in CZTS gave a new photo-magnetic property that was stored and distributed in an external absorption band in the UV-vis ranges. Depending on these enhancements, the authors believe that CFTS thin films are a good competitor to CZTS thin films and can be used as an absorbent layer in thin film solar cells.

2022

Prediction of Ecofriendly Concrete Compressive Strength Using Gradient Boosting Regression Tree Combined with GridSearchCV Hyperparameter-Optimization Techniques

الباحثونZaineb M. Alhakeem، Yasir Mohammed Jebur, Sadiq N. Henedy, Hamza Imran, Luís F. A. Bernardo, Hussein M. Hussein
المجلةMaterials
التاريخ2022-10-23
مختصر البحث

A crucial factor in the efficient design of concrete sustainable buildings is the compressive strength (Cs) of eco-friendly concrete. In this work, a hybrid model of Gradient Boosting Regression Tree (GBRT) with grid search cross-validation (GridSearchCV) optimization technique was used to predict the compressive strength, which allowed us to increase the precision of the prediction models. In addition, to build the proposed models, 164 experiments on eco-friendly concrete compressive strength were gathered for previous researches. The dataset included the water/binder ratio (W/B), curing time (age), the recycled aggregate percentage from the total aggregate in the mixture (RA%), ground granulated blast-furnace slag (GGBFS) material percentage from the total binder used in the mixture (GGBFS%), and superplasticizer (kg). The root mean square error (RMSE) and coefficient of determination (R2) between the observed and forecast strengths were used to evaluate the accuracy of the predictive models. The obtained results indicated that—when compared to the default GBRT model—the GridSearchCV approach can capture more hyperparameters for the GBRT prediction model. Furthermore, the robustness and generalization of the GSC-GBRT model produced notable results, with RMSE and R2 values (for the testing phase) of 2.3214 and 0.9612, respectively. The outcomes proved that the suggested GSC-GBRT model is advantageous. Additionally, the significance and contribution of the input factors that affect the compressive strength were explained using the Shapley additive explanation (SHAP) approach.

2022

Opto-Magnetic and Morphological Properties of the Quaternary CZCr + 2 TS Semiconductor

الباحثونHussein M. Hussein، Kahtan A. Mohammed, and Forat H. Alsultany
المجلةInternational Journal of Nanoscience
التاريخ2022-04-01
مختصر البحث

Recently, Cu2ZnSnS4 (CZTS) chalcogenide has been given extra attention in CZTS thin-film solar cells. In order to enhance the conversion efficiency of CZTS thin-film solar cells, the physical properties of CZTS semiconductor have been improved by incorporating Cr elements into the CZTS semiconductor using the solvothermal method. The experimental results showed that the Cr+2 ion had stronger hybridization and are more effective on energy storage than Zn+2 ion. XRD pattern revealed that the crystal structure of CCrTS compound has high crystallinity and low distortion. Raman analysis indicated the structural transition from kesterite CZTS to stannite CCrTS occurred in the multicomponent CZCrTS samples with Cr content (x ) in the range of 0.75–1. In addition, VSM and UV–Vis absorption spectrum showed the CCrTS compound had a new opto-magnetic property and exhibit a strong ferromagnetic ordering at room temperature. Where the magnetic energy resulted from incorporating Cr+2 ion in the Cu2ZnSnS4 has been stored and distributed in abroad absorption band in UV–vis ranges And Also, led to a decrease in the direct bandgap in the ranges of 1.54–1.25eV. FE-SEM showed that by replacing Cr2+ ion with Zn2+ ion, the particle size was decreased as a result of converting the applied strain from compressive strain to tensile strain in the CZCr2+ TS resulting in decreasing the unit cell volume and the crystal size. This shows that incorporating Cr+2 ions into CZTS compound may be well suitable for fabricating it as an absorber layer in CZTS thin-film solar cells.

2022

Organic-inorganic hybrid material: synthesis, characterization for solar cell application

الباحثونK. A. Mohammed، S. N. Alebadib, K. M. Ziadanc, A. S. AL-Kabbic,A. J. Alrubaied, H. M. Hussein
المجلةJournal of Ovonic Research
التاريخ2022-02-01
مختصر البحث

We report a hybrid system based on conducting polymer-semiconductor from poly(otoluidine) (POT) doped with camphor sulfonic acid(CSA) and cadmium selenide capped with Tri sodium citrate(CdSe-TSC) by the physical mixing method. The influence of CdSe nanoparticles weight percent on the hybrid thin films have been investigated by means of XRD, FESEM, UV-VIS absorption and photoluminescence spectroscopy (PL) measurements. The main diffraction peaks of POT/CdSe hybrids are analogous to the neat CdSe nanoparticles. The absorption measurement reveals that the interaction between CdSe and POT in the hybrid materials led to the blue shift and broadening of the polaron absorption band. The energy gap has been decreased with an increase in the concentration of CdSe NPs. the PL intensity has been totaly quenched when the tow materials are bring to other. The hybrid nanocomposite material and provides useful evidence apropos the optimum use of CdSe nanoparticles in conductive polymer based optoelectronics.

2022

Thermal and magnetic properties of chalcogenide CZFTS nanoparticles for solar cell application

الباحثونE. H. Hussein، H. M. Husseina, K. A. Mohammeda,*,R. S. Zbibahb,A. J. Alrubaiec, S. Sharifid, A. Yazdanid
المجلةChalcogenide Letters
التاريخ2022-01-07
مختصر البحث

An attempt is made to resolve the controversy related to the reconstruction mechanism of magneto-optical stannite/kieserite crystal structure with a random mixture of two quaternary compounds of Cu2ZnSnS4-Cu2FeSnS4 while the identification of phase formation by XRD is difficult. Since the Fe is surprisingly emerged on the Cu position while Fe is replaced by Zn. The induced dynamical sliding by Cu-ionic-host could be existed which is strongly consequence of magnetic exchange competition (F.M and AFM) through the thermos remanent magnetic reflected on DTA thermal loop. Towards the distortion of intra-plane “a-b”, the volume unit cell and c/a are decreased to minimize Gibbs free energy where the band gap energy is also decreased. The broad maximum of Raman spectroscopy is almost decreased linearly. A strong competition between F.M and AF.M due to the distribution of exchange interaction are evident in x≤0.5 which is dominated by AF.M on x=1.

2021

Effect of substituting the ionic radius in the structural and optoelectrical properties of spin-coated thin film synthesized by solvothermal method

الباحثونHussein M. Hussein، Samira Sharifi , Ahmad Yazdani
المجلةOptik
التاريخ2021-05-05
مختصر البحث

High crystalline order, large grains and low defects are important parameters to enhance the structural and optoelectrical properties of a thin film. Here, it was found that these parameters affected by substituting ionic radius in the crystal structure of a thin film. In this report, three ionic radii of Cr2+, Cr3+ and Zn2+ ions were compared to get the optimum structural and optoelectrical properties represented in the CZTS, CCr2+TS and CCr3+TS thin films. Among the highest properties are the crystalline order, absorption coefficient, refractive index, dielectric constants and polarizability to the light. So, the authors believe that the CCr2+TS thin film can be used as an absorber layer instead of CZTS thin film for thin-film solar cell application.

2021

The role of formic acid as secondary dopant and solvent for poly(O-toluidine) intrinsically doped with camphor Sulfonic acid

الباحثون Kahtan A. Mohammed، Kareema M. Ziadan, Alaa S. Al-Kabbi, Dalael Saad Abdulzahr, Hawraa Kareem Judi, Hussein M. Hussein
المجلةMaterials Science Forum
التاريخ2021-07-20
مختصر البحث

The role of formic acid as Secondary Dopant for Poly (O-toluidine) Intrinsically Doped with Camphor Sulfonic-Acid (POT-CSA) nanoparticles were prepared by chemical polymerization had been studied. Spin coating and casting method have been used to deposit good adhesion and uniform thin films of (POT-CSA) on a glass substrates at room temperature. the properties of (POT-CSA) nanoparticles which examined by FTIR, SEM, AFM, XRD, I-V characteristics and UV-VIS. FTIR studies show the several bending and stretching modes of POT. XRD examination demonstrated that NPS. has a semi-crystalline pattern . The synthesized film well covered by the nanoparticles over the entire substrate surface, exhibits uniform, porous, and spherical granular surface morphology, A narrow size distribution is observed and the average size of particles about 80 nm. The band gap (Eg) has been determined which is equal to 3.1 ev. The room temperature conductivity of POT-CSA was 3 * 10-1 S.cm-1,which increases with increasing temperature. Electrical conductivity enhances up to three order after the secondary doping process. Keywords: POT-Chemical polymerization-Conducting polymer-SEM-AFM

2019

Doping the bismuth into the host's Cu2ZnSnS4 semiconductor as a novel material for thin film solar cell

الباحثونHussein Hussein، Ahmad Yazdani
المجلةResults in Physics
التاريخ2019-02-05
مختصر البحث

In this report for the first time, the Cu2Zn1-xBixSnS4 (CZBiTS) semiconductor at (0 ≤ x ≤ 1) has been synthesized using the solvothermal and spin coating methods. The structural, optical, morphological and electrical properties of CZBiTS semiconductor were investigated. It was found that the Cu2BiSnS4 (x = 1) (CBiTS) thin film was better than the Cu2ZnSnS4 (x = 0) (CZTS) and CZBiTS (x = 0.25, 0.5 and 0.75) thin films due to its optimum features like higher absorption coefficient (>104 cm−1), higher optical conductivity, lower transmittance and lower band gap (1.25 eV). Furthermore, the CBiTS thin film was more uniform, improved and had large grains so; it was observed the number of grains in the CBiTS film, 0.038 nm−2, were lower than that, 6.8 nm−2 of the CZTS film. Also, the dislocation density in the CBiTS film, 0.0007 nm−2, was lower than that, 0.024 nm−2 of the CZTS film resulting in decreasing the defects in the grain boundaries and increasing the current from 0.34 mA for the CZTS film to 0.48 mA for the CBiTS film. Based on the observed results, authors considered the CBiTS thin film as a novel material and competitor for the CZTS thin film and can be used as an absorbent layer to sunlight in thin film solar cell.

2018

Spin-coated Cu2CrSnS4 thin film: A potential candidate for thin film solar cells

الباحثونHussein Hussein، Ahmad Yazdani
المجلةMaterials Science in Semiconductor Processing
التاريخ2018-12-28
مختصر البحث

In this regard for the first time, the multicomponent chalcogenide Cu2(Zn1-xCrx)SnS4 (CZCrTS) nanocrystals at (0 ≤x ≤ 1) were synthesized by the solvothermal method. Improvement of structural, optical and electrical properties in Cr-doped Cu2ZnSnS4 thin film deposited on SLG substrate by spin coating technique has been investigated. It was observed that introduced the Cr element into the Cu2ZnSnS4 nanocrystal led to increasing the disorder of cations distribution within the unit cell through increasing the tensile strain inside the unit cell resulting in a decline the unit cell volume accompanied by a decrease the particle size and also the crystallite size. It has been found that the optical band gap of the CZCrTS nanocrystals ranges from 1.54 to 1.35 eV with increasing the partial substitution of Zn element with Cr element which in turn also led to a significant improvement in the crystallinity of the Cu2ZnSnS4 film, a facilitates the grain growth and also increases the grain size where accompanied this process post-sulfurization at 450 ℃ for 30 min. In addition, it was observed that the number of grains in the Cu2CrSnS4 film (x = 1), 2.79 (nm−2), were lower than that, 6.8 (nm−2) of the Cu2ZnSnS4 film. Also, the dislocation density in the Cu2CrSnS4 film (x = 1), 0.012 (nm−2), was lower than that, 0.024 (nm−2) of the Cu2ZnSnS4 film, which resulted in decreased the defects in the grain boundaries and increasing the current from 0.34 mA for the Cu2ZnSnS4 film to 0.42 mA for the Cu2CrSnS4 film. Due to a higher absorption coefficient (>104 cm−1), a higher optical conductivity (> 23 *1012 S−1) and lower transmittance have been reported for the Cu2CrSnS4 thin film (x = 1), we believe the Cu2CrSnS4 thin film may be a good candidate can be used as an absorbent layer to sunlight in thin film solar cell.

2018

Investigation the influence of Fe (III) doping in Cu2ZnSnS4 semiconductor: Structural, optical and magnetic properties

الباحثونHussein Hussein، Ahmad Yazdani
المجلةOptik
التاريخ2018-11-14
مختصر البحث

Recently, quaternary Cu2ZnSnS4 (CZTS) semiconductor has been garnering attention in CZTS thin film solar cells. In order to improve the physical properties of CZTS semiconductor which in turn enhancing the conversion efficiency of CZTS thin film solar cells, Fe+3 has been incorporated into CZTS semiconductor using the solvothermal method. The experimental results of effecting Fe+3 showed that the Fe+3 had stronger hybridization and more effective on energy storage than Fe+2 thus it's more convenient than Fe+2. XRD pattern revealed the crystal structure was high crystallinity and low distortion. Raman analysis indicated the structural transition from kesterite Cu2ZnSnS4 to stannite Cu2FeSnS4 occurred in the Cu2(Zn1-xFex)SnS4 samples with Fe3+ content (x) in the range of 0.75–1. UV–Vis absorption spectrum showed the Cu2FeSnS4 semiconductor had a new opto-magnetic property. Where the magnetic energy resulted from incorporating Fe+3 in Cu2ZnSnS4 has been storage and distributed in abroad absorption band in UV–vis ranges. Also, increasing Fe+3 content led to a decrease in the direct bandgap in the ranges of 1.54 eV to 1.27 eV. FE-SEM showed that the shape of particles has been changed from sphere-like to rod-like and then to sheet-like particles which are strongly related to the magnetic exchange energy. The iron-containing samples were superparamagnetic materials, thus at the low and high field, all samples showed no hysteresis area and hence no coercivity and no remanence. This showing that incorporating Fe3+ atoms into CZTS semiconductor may be well suitable for fabricating it as an absorber layer in CZTS thin film solar cell.

2018

The effect of polyvinylpyrrolidone (PVP) on thermochemical reaction of Cu2SnS3 nanoparticles: Shape and opto-crystalline structure

الباحثونAhmad Yazdani، Zohre Shadrokh, Hussein Maaallah Hussein
المجلةMaterials Science in Semiconductor Processing
التاريخ2018-02-20
مختصر البحث

An attempt is made to resolve the controversy related to the difficulty in synthesizing the pure single crystalline phase of ternary Cu2SnS3 nanoparticles whereas the chemical bond and formation of crystalline structure and stoichiometry of nano-sized are strongly controlled by the surface of nano-sized particles. The related experimental results of X-ray diffraction, Raman active lattice mode, and UV–visible absorption were justified via solvothermal method resulted in the value of strain and the size of diameter. When the proper concentration of polyvinylpyrrolidone/ ethylene glycol (0.005gmL−1) as the capping agent was taken, the uniform size and shape of Cu2SnS3 nanoparticles with a sphere-like morphology were obtained. In the case of using copper chloride salt, the Cu2SnS3 nanoparticles with tetragonal phase and optical band gap energy of ~ 1.4 eV were obtained. Moreover, the Cu2SnS3 particles in the hexagonal phase were produced with the optical band gap of ~ 1.33 eV using copper acetate.

عرض التفاصيل