مواقع التدريسيينجامعة الكوفة
هناء كاظم كزار الموسوي
أستاذ مساعد

هناء كاظم كزار الموسوي

English Version
0بحث منشور
0محاضرة
0اهتمام بحثي

الملف الشخصي

الاسم: هناء كاظم كزار
الشهادة: دكتوراه
التخصص: كيمياء فيزياوية
العنوان الوظيفي: تدريسية وباحثة
بكلوريوس علوم كيمياء جامعة الكوفة /2002
ماجستير علوم كيمياء / جامعة الكوفة 2012
دكتوراه علوم كيمياء / جامعة الكوفة 2019
عنوان رسالة الماجستير: الاكسدة الضوئية المحفزة لصبغة الانلين الزرقاء بأستخدام اشباه موصلات مختلفة
عنوان اطروحة الدكتوراه: تحضير متراكبات نانوية من بعض الاكاسيد المعدنية والبولي ثايوفين مضادة للتأكل ومعالجه للمياه.
خلاصة اطروحة الدكتوراه:
تضمنت الدراسة تحديد السلوك الكهروكيميائي لبعض الايونات المعدنية مثل الكروم ثلاثي التأكسد والسيريوم ثلاثي التأكسد والقصدير ثنائي التأكسد باستخدام تقنية الفولتامتري الحلقي على قطب من الفولاذ المقاوم لتحديد الجهد اللازم لأكسدة هذه الاصناف.
تم دراسة السلوك الكهربائي لأيونات الكروم ((III عند pH4 وكذلك ايونات السيريوم عند pH8 في بفر الخلات بتركيز 0.1 مولاري ولدراسة السلوك الكهربائي لأيونات القصدير (II) تم استخدام HNO3/0.1M NaNO3 كألكتروليت ساند عند pH2 والتي استخدمت على اساس استقرار هذه الايونات في المحلول المائي واعتمادا على منحنيات بوربكس. بينت النتائج ان الايونات Cr(III) و Ce(III) تعاني انتقالا الكترونيا مفردا خلال عمليات اكسدة شبة رجوعية , اما القصدير (II) فهو يعاني انتقال الكترونين بعملية اكسدة غير رجوعية.
استخدمت تقنية الفولتامتري الحلقي لدراسة ميكانيكية التفاعل الكهروكيمياوي اثناء تكوين الفيلم على سطح القطب , حيث وجد ان الكروم(III) يكون بشكل CrOH+2 في وسط حامضي عند pH4 والذي يتحول بعدها الى Cr2O3 حسب ميكانيكية EC , اما Sn(II) فانة يتاكسد الى Sn(IV) والذي يتحول الى اكسيد القصدير SnO2, ايون السيريوم الثلاثي يتاكسد الى Ce(OH)+22 ثم الى فيلم رقيق من اوكسيد السيريوم CeO2 يترسب على سطح القطب واقترحت ميكانيكية EC لتفسير ميكانيكية التفاعل.
استخدمت تقنية الامبيرومتري لدراسة ميكانيكية تكوين الانوية والنمو اثناء ترسب المواد كهروكيميائيا على سطح قطب الفولاذ , حيث وجد ان اوكسيد الكروم يتبع نموذج IN3D و واوكيسد السيريوم ينمو حسب نموذج PN3D و وينمو اوكسيد القصدير حسب نموذج PN2D اما بوليمر الثايوفين فينمو حسب نموذج IN2D وتم من خلالها ايضا حساب معامل الانتشار وعدد المواقع المتوفرة لنمو الاكاسيد والبوليمر.
في هذه الدراسة تم اجراء البلمرة الكهربائية للثايوفين على قطب الفولاذ المقاوم في الوسط الحامضي تحت جو من النتروجين باستخدام الفولتامتري الحلقي تحت شروط مختلفة مثل تأثير تغير تركيز الحامض وتأثير تركيز المونومير وتأثير درجة الحرارة .حركية التفاعل بينت ان التفاعل من الرتبة الاولى نسبة الى المونومير والرتبة 0.9324 نسبة الى حامض HClO4 واقترحت المعادلة الحركية Rp = KE [HClO4]0.9324 [monomer] 1.017 لعملية البلمرة الكهربائية. تم دراسة تأثير درجة الحرارة على عملية البلمره الكهربائية للثايوفين ولوحظ ان تيارات الاكسدة تزداد مع زيادة درجة الحرارة, وتم حساب الدوال الثرموديناميكية لعملية البلمرة ووجد ان طاقة التنشيط تساوي 36كيلوجول /مول والانثالبي 33.8 كيلوجول/مول اما الانتروبي فكانت قيمتة -197.8 جول/مول.
حضرت ثلاثة متراكبات مختلفة تشمل متراكب البولي ثايوفين و اوكسيد الكروم ومتراكب البولي ثايوفين و اوكسيد القصدير ومتراكب البولي ثايوفين واوكسيد السيريوم من خلال البلمرة الكهربائية للثايوفين على اقطاب مطلية بالأوكسيد المحضر مسبقا تحت جهد ثابت مقدراه 1.7 فولت تم تحديده بأستخدام تقنية الفولتامتري الحلقي.
تم دراسة التوصيل الكهربائي للمركبات المرسبة على سطح الزجاج باستخدام تقنية المجسات الثنائية two point porbe , وجد ان المتراكبات تمتلك توصيلية عالية مقارنة مع اشباه الموصلات التي حضرت منها وذلك بسبب التعاقب الذي حصل في المتراكبات بعد التهجين.
شخصت كل المركبات المحضرة بمطيافية الاشعة تحت الحمراء, FTIR وتحليل رامان والاشعة السينية XRD و التحليل الحراري التفاضلي TGA وكذلك تحليل الاشعة فوق البنفسجية UV/Visible كما تم تشخيص شكل وطوبوغرافية السطح من خلال مجهر القوة الذرية AFM والمجهر الالكتروني الماسح FESEM والمجهر الالكتروني النافذ TEM.
تم دراسة فعالية المركبات المحضرة كمساعدات كهربائية Electrocatalytic في عملية التفكيك الكهربائي للصبغة (RB4) حيث استخدم الفولاذ المطلي بالمركبات PT , Cr2O3, SnO2 , CeO2 , PT/ Cr2O3, PT/ SnO2, and PT/ CeO2 كأنود في خلية التفكك الكهربائية بأستخدام ملح كلوريد الصوديوم كألكتروليت ساند وكانت كفاءة ازالة اللون للصبغة بعد مرور 15 دقيقة جيدة عند تسليط جهد مقداره 3 فولت واعطت المتراكبات الهجينة فعالية عالية مقارنه بالأكاسيد وكانت نسب الازالة(41%) ,PT (37%), Cr2O3 (32 %) SnO2(41%), CeO2 (54%) ,PT/ Cr2O (62%), PT/ SnO2 , PT/ CeO2 (91. %) لوحظ من طيف الاشعة تحت الحمراء للصبغة بعد المعالجة اختفاء الترددات الرئيسية الخاصة بالصبغة والتي تدل على الاكسدة الكهربائية المباشرة للصبغة على سطح الانود المستخدم.
تم دراسة فعالية المركبات المرسبة على سطح الفولاذ كمضادات للتأكل في محلول 3.5% ملح كلوريد الصوديوم بطريقة الفقدان في الوزن بظروف مختلفة مثل تأثير تركيز المواد المستخدمة في ترسيب الفيلم على سطح القطب وكذلك تأثير زمن الغمر في المحلول الملحي لوحظ ان المتراكبات لها نسبة حماية اعلى كما ان الحماية تزداد بزيادة التركيز وتنخفض مع زيادة زمن الغمر.
كذلك تم قياس فعالية المواد المحضرة كمضاد للتأكل بطريقة كهربائية وهي قياس منحنيات الاستقطاب بأستخدام تقنية المسح الفولتامتري الخطي. حيث من خلال منحنيات الاسقطاب يتم حساب جهد التأكل وتيار التأكل وجد ان تيار التأكل يقل في حالة الفولاذ المغطى بطبقة من المواد المحضرة وتزداد الكفائة في حالة استخدام المتراكبات .اما جهد التأكل فأنة يزاح باتجاه اكثر ايجابية في حالة المتراكبات مما يدل على كفائة عالية لهذه المواد . لوحظ ان الكفائة تزداد مع التركيز وتقل بزيادة درجة الحرارة. وقد تم حساب طاقة التنشيط للتأكل وكذلك الدوال الثرموديناميكية الاخرى الانتروبي والانثالبي .

الاهتمامات البحثية

1

البحوث المنشورة

13
2022

Electrochemical preparation of aluminum oxide nanoparticles and using for remove chromotrope-E122 dye

الباحثونHanaa Kadtem Egzar، Widad Ibrahem Yahya Nuha Abdul-Saheb Ridha Eman Hassan Sahap
المجلةInternational Journal of Health Sciences
مختصر البحث

A photocatalyst aluminum oxide Al2O3 Nanoparticles was effectively prepared by electrochemical method using electrolysis cell which contains stainless steel (1cm 2) and aluminium plate (1cm2) were worked as a cathode and anode electrodes respectively. The synthesized Al2O3 Nanoparticles sample was identified by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Field Emission Scanning Electron Microscope (FE-SEM) with (EDS) analysis. The XRD pattern specified that prepared Al2O3 sample had a crystal structure for γ-Al2O3with average crystal size (3nm) was achieved at (1000°C) calcination temperature. FTIR spectra indicated the existence of O–Al–O bonds vibration and hydroxyl group in the sample. The FESEM images gave morpholgy of Al2O3 nanoparticles powder after calcination to 1000°C was spherical shape and the particles were attached to each other, leading to an increase in particle size. The EDS measurements indicated the presence of Al with O peaks. The experimental results of the Al2O3 photocatalyst calcined at 1000°C for two hours showed photocatalytic efficiency to degradation Chromotrope -E122 dye under UV light.

2022

CO-PRECIPITATION SYNTHESIS AND CHARACTERIZATION OF ALUMINUM OXIDE NANOPARTICLES AS CATALYST FOR THE REMOVAL OF REACTIVE BLUE 4 DYE FROM AQUEOUS SOLUTIONS

الباحثونHanaa Kadtem Egzar، Eman Hassan Sahap[b], Amer Muosa Juda[c], Nuha Abdul-Saheb Ridha
المجلةEur. Chem. Bull
مختصر البحث

Calcinations of aluminum hydroxide (gibbsite) leads to a series of phase transitions. These phase transitions affect the properties and activity of the resulting aluminum oxide. During this work, aluminum oxide nanoparticles were prepared by co-precipitation method with calcination of the resulting aluminum hydroxide at two different temperatures (600°C and 1000°C). The structural properties of the resulting aluminum oxides were investigated using X-ray diffraction, Fourier Transform infrared analysis, and Field Emission Scanning Electron Microscopy. The results indicate the formation of the amorphous γ -AlOOH and γ- Al2O3 phases upon calcination of aluminum hydroxide at 600°C, while the γ-Al2O3 and α-Al2O3 phases are formed at calcination at 1000°C. Also, a change in the shape and size of the formed crystals was observed with the increase in temperature. The efficiency of the prepared oxides at different temperatures was compared in removing the reactive blue 4 dye by adsorption method from the aqueous solution and it was found that amorphous aluminum oxide is more effective in removing the polluting dye.

2020

Study Kinetic and Adsorption Isotherm of Corrosion Inhibition of Mild Steel in 3.5% sodium chloride by prepared Chalcone Derivative as an Inhibitor

الباحثونHAWRAA MOHAMMED SADIQ1، HANAA KADTEM EGZAR2
المجلةInternational Journal of Pharmaceutical Research
مختصر البحث

During this study, the influence of inhibition corrosion of mild steel by the chalcone derivative (Ch) [3- (4- chlorophenyl) -1-phenylprop-2-en-1-one] in 3.5% NaCl solution was used tried the weight loss process. The chalcone derivative was prepared by reaction 4-chlorobenzaldehyde with acetophenone. This compound (Ch) was determined by the melting point and FT. IR spectroscopy. The weight loss results showed that the effectiveness of the inhibitor (% IE) improved with a higher inhibitor concentration, achieved 75% higher inhibitory influence at 0.02 M and decreased with increased immersion time. The corrosion kinetics of mild steel in a salt environment using (Ch) was studied and the kinetic behavior of the data followed a pseudo first order -reaction. The adsorption of chalcone derivative (Ch) on the mild steel surface follows the adsorption isotherm models of Frumkin and Langmuir. The Gibbs free energy values obtained showed spontaneous adsorption of chalcone (Ch) on the surface of mild steel.

2020

Electrochemical synthesis, characterization and evaluation of antioxidant activity of Co3 O4 nanoparticles and Co3 O4/TiO2 nanocomposite

الباحثونNoor Mustafa Kamal، Hanaa Kadtem Egzar 1, Nuha Abdul-Saheb Ridha
المجلةEurAsian Journal of BioSciences
مختصر البحث

Cobalt oxide and Co3O4 / TiO2 hybrid nanoparticle were prepared utilizing the one step electrolytic deposition method. The new nanoparticle antioxidant has been diagnosed according to the infrared spectroscopy by the emergence of new groups in the Co3O4 / TiO2 spectrum, which indicates the formation of a new antioxidant. X-ray diffraction technology has shown the emergence of new diffraction levels in the anti-Co3O4 / TiO2 spectrum compared to the cobalt oxide diffraction spectrum. The morphology of synthesized compounds were examined by Field Emission Scanning Electron Microscopy (FESEM), pure Co3O4 which have sphere-shaped aggregations forms have 30.27 nm size, while TiO2/ Co3O4 nanocomposite shows Hexagonal sheets structure and clearly indicates that the Co3O4 is diffusion on surface of TiO2 with 33.9 nm size. The EDS of the elemental is indicating uniform formation of TiO2 / Co3O4 composite by presented of titanium, cobalt and oxygen. Antioxidant activity of pure Co3O4and Co3O4- TiO2 samples were compared using H2O2 scavenging activities. Considerable in vitro antioxidant activities in a concentration-dependent manner were recorded. Interestingly, Co3O4 / TiO2 showed more elevate scavenging in H2O2antioxidant assays in low concentrations but this activity decrease with increase the nanocomposite concentration

2020

Synthesis and characterization of CuO nanoparticles and TiO2/CuO nanocomposite and using them as photocatalysts

الباحثونNuha Abdul-Saheb Ridha، Hanaa Kadtem Egzar, and Noor Mustafa Kamal
المجلةAIP Conference Proceedings 2290, 030006
2019

Electropolymerization of Thiophene on Stainless Steel and using for Anticorrosion

الباحثونHanaa Kadtem Egzar، Amer Muosa Juda and Muthana Saleh Mashkour
المجلةJournal of Engineering and Applied Sciences
مختصر البحث

Abstract: In this research electropolymerization of Thiophene (Th) on Stainless Steel (SS) electrode has been studied by applying cyclic voltammograms in acid solutions in nitrogen gas at different reaction parameters for example concentration of monomer, concentration of perchloric acid and temperature. The electropolymerization method respects first order kinetics with respect to the concentration of monomer, the order of reaction with respect to the supporting electrolyte concentration (HClO4) was found to be 0.743. The experimentally achieved equation of kinetic was PR = KE [HClO4]0.743 [monomer]1.017. A easy mechanism for the electrochemical reaction of (Th) was suggested and the apparent activation energy was define. The obtained dark films of Polythiophene (PT) were characterized by FTIR, X-ray, TEM and FESEM analysis. Traditional electrochemical methods for the obtained polymer such as cyclic voltammetry and linear sweep voltammetry methods were used to characterized, synthesis and investigate the application of the PT polymer as corrosion inhibitors for stainless steel in 3.5% NaCl.

2019

Electrosynthesis of Polythiophene/Cr2O3 Nanocomposite as a Model of Health Topics (Water Treatment)

الباحثونHanaa Kadtem Egzar1، Muthana Saleh Mashkour2, Amer Muosa Juda3
المجلةJournal of Global Pharma Technology
مختصر البحث

A Nanocomposite film consisting of Cr2O3 and polythiophene (PT), has been successfully fabricated on a stainless steel substrate (SS) by a simply electrochemical deposition method. The fabrication mechanisms are based on electrolytic deposition ELD method of Cr2O3 thin film and electropolymerization deposition of PT. The papered Cr2O3 and PT/Cr2O3 were characterized by FT-IR, FESEM, TEM, XRD, and Raman spectra. Electrochemical degradation of Reactive Blue 4 (RB4) was studied by Cr2O3 and PT/Cr2O3 coated anodes in the existence of sodium chloride as a supporting electrolyte to investigate the effect of polythiophene /Cr2O3 Nano composite coating. The color removal efficiencies were 51.7% and 92 % respectively for above anodes, after 25 minutes of electrolysis at applied potential 3V.

2016

Thermalstability and Photostability of new Azo dye

الباحثونHana,a Kadhem Egzar، Noor Mustafa Kamal, Hana,a Adii Ali , and Muthana Saleh Mashkour
المجلةInternational Journal of Scientific and Research Publications
مختصر البحث

In this work Azo dye {(2,2'-(3,3'-dimethylbiphenyl-4,4'-diyl) bis (1-(2-hydrazinyl-3,5-dinitrophenyl)diazene)} have been prepared and characterized by, spectorphotometric method UV-Vis, FT-IR spectrum and 1H-NMR spectrum. The absorption maxima was observed in the 464 nm, Thermogravimetric(TG) and differential scanning calorimetry (DSC) of this compound was measured, The photostability of azo dye in water occurred under UV irradiation processes. Dyeing process has on the dye prepared it gave good results. we have found that the colors of cotton fabrics after dyeing was orange

2016

Photochemical activity and Physical properties of the Preparation new Catalyst Sb2O3-Cr2O3/Al2O3

الباحثونFatima Allawi Abdul Sejad، Suaad Abdel – Mahdi Abd – Nour2 and Hana,a Kadtem Egzar
المجلةInternational Journal of Scientific and Research Publications
مختصر البحث

In this work we prepared a new catalyst from Antimony (III) oxide, Chromium (III) oxide which mixed in different weight ratio and supported on granulated alumina by suspension method . The film structure of prepared catalyst was characterized by X-Ray Diffraction spectrum. The physical properties also studied such as: porosity, pores size and surface area. The photocatalytic activity of prepared catalyst was studied by photocatalytic degradation of Neutral red dye by using sun light .In this work the effects of parameters such as amount of catalyst, effect of pH and dye concentration on photocatalytic degradation of dye were studied.

2013

Removal of Amaranth Dye from aqueous Solution using Pomegranate Peel

الباحثونHana,a Adii Ali ، Hana,a Kadhem Egzar , Noor Mustafa Kamal, Naha abdulsaheb and Muthana Saleh Mashkour
المجلةInternational Journal of Basic & Applied Sciences IJBAS-IJENS
مختصر البحث

Pomegranate peel was tested for its ability to adsorb amaranth dye from solutions with alterations in the parameters such as pH, contact time, sorbent weight, and temperature. The adsorption process was analyzed on the basis of pseudo-first-order, pseudo-second-order kinetic models and also by Freundlich and Langmuir isotherm models. The maximum adsorption capacity for pomegranate peel as calculated by Langmuir model was found to be 3.448mg/g and 3.560 g\ L at 25°C. Thermodynamic parameters such as the changes of free energy, enthalpy, and entropy were also evaluated. The results indicated that the sorption amaranth dye onto the pomegranate peel was an endothermic process that could be well fitted with the Langmuir adsorption model and pseudo-second-order kinetic model.

2013

Study the Photodegradation of Aniline Blue dye in aqueous Phase by using Different Photocatalysts

الباحثونHanaa Kadtem Egzar، Muthana Saleh Mashkour and Amer Muosa Juda
المجلةAsian Transactions on Basic and Applied Sciences
مختصر البحث

This study involves the photocatalytic degradation of Aniline blue(AB) dye, employing heterogeneous photocatalytic process. Photocatalytic activity of different semiconductors such as zinc oxide (ZnO) ,zinc sulfide (ZnS) and Tin dioxide (SnO2) has been investigated. An attempt has been made to study the effect of process parameters through amount of catalyst, concentration of dye, pH of dye solution and temperature on photocatalytic degradation of AB solution. The experiments were carried out by varying pH (2-12), amount of catalyst (0.05–1.5 g), initial concentration of dye (25–100ppm ) and temperature range(293-323)K. The optimum catalyst dose was found to be( 0.1 ,0.5 g and 1) g\L by using ZnO ,ZnS and SnO2, respectively. In the case of ZnO and SnO2 , maximum rate of photoreaction of AB solution was observed in acidic medium at pH 4, whereas the degradation of AB reached maximum at pH 5 when using ZnS catalyst . The performance of photocatalytic system employing ZnO/UV light was observed to be better than ZnS /UV and SnO2/UV system. The complete degradation of AB was observed after 12 min with ZnO, whereas with ZnS, only 75% dye degraded and 24.5% with SnO2in 12 min. Photocatalytic degradation was found to increase with increasing temperature. Arrhenius plot shows that the activation energy is equal to 20.94 kJ mol−1 with ZnO, 17.97 kJ mol−1 with ZnS and 14.1 mol−1 with SnO2 catalyst.

2023

Electrolytic synthesis of CuO/SnO2 Nanocomposites for Dye-Sensitized Solar Cells Applications

الباحثونAqeel Mahdi Alduhaidahawi، , Hanaa Kadtem Egzar
المجلةJournal of Population Therapeutics & Clinical Pharmacology
التاريخ2023-04-07
مختصر البحث

In this study, CuO/SnO2 nanocomposites were synthesized by an easy, low cost and short time electrolytic method for fabrication dye-sensitized solar cells ( DSSCs). The characterization of the prepared CuO/SnO2 NCs were studied by several techniques. The FE-SEM images of CuO/SnO2- PVA and CuO/SnO2-PVP NCs were both rectangle and regular cube shapes respectively. HRTEM images of synthesized CuO/SnO2 NCs show homogeneous cubic shapes had an average size of 30-40 nm. The XRD results show the monoclinic-tenorite phase of CuO crystal structure and the SnO2 crystal structure is in rutile tetragonal SnO2. The optical properties of the prepared CuO/SnO2- PVA and CuO/SnO2-PVP NCs were studied through UV / VIS spectroscopy. The optical bandgap was found to be 3.15 eV and 3.18 eV respectively. Dye-sensitized solar cells were fabricated using CuO/SnO2- PVA and CuO/SnO2-PVP NCs as anode electrodes (front electrode) and graphite as cathode (back electrode) in the presence of two kinds of natural dyes, these are pomegranate and parsley dyes, and iodine / iodate electrolyte solution. The photovoltaic parameters were determined from I-V plots of the DSSCs indicated that the DSSCs prepared from parsley dye were more efficient. The reason may be attributed to the fact that parsley chlorophyll dye contains an abundance of electrons capable to providing the DSSCs with these electrons better than the anthocyanin dye found in pomegranate

2024

PREPARATION OF GRAPHITE PASTE MODIFIED ELECTRODES SUPPORTED BY POLYANILINE AND CHROMIUM OXIDE NANOPARTICLES FOR ELECTROCHEMICAL DETECTION OF UREA

الباحثونHanaa Kadhem Egzar، Aqeel Mahdi Alduhaidahawia , Sawsan D. A. Shubbarb , Fadhil Faez Saed
المجلةACTA CHEMICA IASI
التاريخ2024-01-08
مختصر البحث

A graphite paste modified electrodes with Cr2O3 nanoparticles and polyaniline nanocomposite were prepared to study the electrochemical behavior of urea in 1M KOH solution. A co-precipitation simple method was utilized to synthesis the Cr2O3 nanoparticles and chemical polymerization was used to prepare polyaniline (PANI). The modified electrodes under study were prepared by mixing of graphite powder with Cr2O3 nanoparticles and PANI in a ratio of (1/4 w/w). The electrodes were characterized by X-ray diffraction, field emission scanning electron microscopy, cyclic voltammetry and differential pulse voltammetry. The electrocatalytic activity of the electrodes toward urea was investigated. The results indicated that the Cr2O3/graphite (Cr-G) electrode was more sensitive to urea than PANI /graphite (P-G) or PANI/Cr2O3/graphite (P-Cr-G) electrodes. The cyclic voltammetry method was used to determine the linear range and limit detection. Accordingly, the modified electrode (Cr-G) showed a linear range of (0.001 - 0.040) mM and a detection limit was 0.00637 mM. Moreover, the kinetic characteristics of urea, like transfer coefficient and the rate constant, were examined in an alkaline media.

المحاضرات

20
عرض التفاصيل