مواقع التدريسيينجامعة الكوفة
0Publications
0Lectures
0Interests

About

Academic education
Im holds a bachelor's degree in chemical engineering from the University of Baghdad in 1986 with a good grade from the first quarter of the department
Obtaining a master's degree in chemical engineering from the University of Al-Qadisiyah 2020, specializing in catalysts in oil refineries
Master's thesis entitled
Preparation and Characterization of Heterogeneous
Catalysts for Hydrodesulfurization of Heavy Naphtha
From 2013-2016, Officer of Corrosion Laboratory in the Department of Material Engineering
2016-2018, worked in the laboratories of the Nanotechnology Research Unit
Operation march
1995-1998 Responsible for the reverse osmosis division of Babel Tires Factory
1998-2001 Extensive experience in the production and quality of cement produced in Najaf Cement Factory
2001-2008 Responsible for the Environment Division in the Southern General Cement Company, which includes eight plants
Obtaining the internal auditor certificate from the Central Organization for Standardization and Quality Control 2006
2008-2012 Responsible for treating the water supplied to the power station of the Kufa Cement Factory
Obtaining many books of thanks and appreciation in the field of work

Research interests
1- Water treatment for industrial uses (steam boilers, cooling equipment, reverse osmosis systems)
2- Preparation and diagnosis of catalysts (heterogeneous) in oil refineries to remove environmental pollutants (sulfur compounds) present in the distilled petroleum fuels.
3- Corrosion problems occurring in oil installations and equipment.
4- Study of air pollution resulting from cement kiln dust (wet method) and devices for sedimentation of dust particles (electrostatic precipitators).

Research Interests

9

Publications

4
2020

Preparation and Catalytic Activity of Co-Mo/γ-Al2O3 Catalyst for Hydro-desulfurization Reaction

AuthorsFouad K. Mahdia, Mushtaq T. Albdiryb*, Abbas A. Diwanc
JournalAl-Qadisiyah Journal for Engineering Sciences
Abstract

In this study, a bimetallic Co Mo spicy supported on γ-Al2O3 heterogeneous catalyst was successfully prepared by an incipient wetness impregnation for a hydrodesulphurization (HDS) reaction of heavy Naphtha liquid produced from AN- Najaf refinery. The structural characteristics of the prepared 5Co-15Mo/γ-Al2O3 catalyst were evaluated by scanning electron microscopy (SEM) and X-ray powder Diffraction (XRD) spectroscopies. The surface area, pore volume and pore size were determined by a Brunner–Emmett–Teller (BET) method. The catalytic activity in the removal of sulphur compound from a heavy naphtha through the HDS at four different reaction temperatures (523, 548, 573, 598 °K) and four different liquid hourly space velocities (3, 4, 5, and 6 hr-1) under a constant ratio of 150 mL H2/1 mL naphtha and a hydrogen gas pressure of 1.5 MPa, has revealed that the prepared catalyst was efficient to remove 82 % of sulphur at 598 °K temperature and 3 hr-1 time. The enhanced selectivity of the CoMo/γ-Al2O3 catalyst through a hydro-treating reaction ascribes to the bimetallic-support interaction and the dispersion of MoS2 particles that leaded to a large edge-to-corner ratio of CoMoS slabs.

2020

Role of Tungsten Metal on Trimetallic Co-Mo-W/γ-Al2O3 Heterogeneous Catalyst for Efficient Hydro-desulfurization

AuthorsFouad K. Mahdi1, Mushtaq T Albdiry2* 1Department of Chemical Engineering, University of kufa- Iraq 2Department of Materials Engineering, University of Al-Qadisiyah, Iraq
Journal4thInternational Conference on Engineering Sciences Certificate of participation
Abstract

This study investigates the role of inserting tungsten metal (W) on the catalytic activity of trimetallic W-Mo-Co supported on Gamma-Alumina (γ-Al2O3) heterogeneous catalyst used for a hydrodesulphurization (HDS) in the oil refinery. A bimetallic Co5Mo15/γ-Al2O3 and a trimetallic Co5Mo14W1/γ-Al2O3 catalysts were synthesized by an incipient wetness impregnation. The synthesized trimetallic Co5Mo14W1/γ-Al2O3 catalyst exhibited a better catalytic performance of 88 % hydro-removal percentage of sulfur through the HDS reaction of petroleum naphtha compared to 82 % for the bimetallic 5Co-15Mo/γ-Al2O3 catalyst following the same operation conditions of pressure 11.5 bar, temperature 598°K and reaction time of 3 hr. The enhanced catalyst's activity is attributed to the presence of tungsten metal that contributed in increasing the metal sites on the catalyst's reaction surface.

2016

Natural Polymer of Iraqi Apricot Tree Gum as a Novel Corrosion Inhibitor for Mild Steel in 1M HCl Solution.

AuthorsI. M. Alwaan, Fouad Kadhim Mahdi
JournalHindawi Publishing Corporation International Journal of Chemical Engineering Volume 2016, Articl
Abstract

Corrosion inhibition of mild steel in 1 M hydrochloric acid using Iraqi apricot tree gum Arabic as natural polymer was studied. The weight loss method was used to predict the efficiency of the inhibitor on corrosion of mild steel in a temperature range of 17–40∘ C. The FTIR result of natural polymer revealed that the C=O and O-H groups were found in the structure of the natural polymer. The results of weight loss method showed that the inhibition efficiency (

2023

Bimetallic CoMo and trimetallic CoMoW catalyst supported on γ‑Al2O3 for efficient naphtha hydrodesulfurization

Authors Mushtaq Albdiry [email protected]; [email protected] Department of Materials Engineering, University of Al-Qadisiyah, Al Diwaniyah, Iraq , Fouad Mahdi [email protected] Department of Chemical Engineering, University of Kufa, Kufa, Iraq
JournalReaction Kinetics, Mechanisms and Catalysis
Date2023-08-31
Abstract

Bimetallic Co 5Mo15 of 5 wt% Cobalt as a promoter and 15 wt% Molybdenum as an active metal and trimetallic Co 5Mo15-xWx (x=1, 3, 5 wt%) heterogeneous catalysts supported on gamma alumina (γ-Al2O3) were synthesized by an incipient wetness co-impregnation process. The structural and the physicochemical characteristics of the prepared bi- and tri-metallic catalysts were evaluated by the XRD, SEM, BET and BJH. The role of third W active metal on the catalytic activity was determined through a hydrodesulfurization (HDS) reaction of naphtha at four different reaction temperatures (250, 275, 300, 325 °C) and four liquid hourly space velocities, LHSV (3, 4, 5, 6 h−1) under constant 1.5 MPa H2 pressure. The trimetallic CoMoW5 catalyst exhibited the maximal HDS efficiency at 325 °C and 3 h−1 liquid flow of 88% sulfur removed compared to the CoMo catalyst. This was ascribed for the role of the highly dispersed active W metal and presence of the sulfided CoMoWS and CoWS sites on the alumina surface that leads to increase the surface area and the porous structure, and enhancing the metal/sulfur bond. Keywords Trimetallic catalyst · Heterogeneous · Hydrodesulfurization · Tungst

Lectures

4

هندسة التاكل

corrosion engineering

الوحدات الصناعية

unit operations

العوامل المساعدة

catalysts

Petrochemical Industry

الصناعات البتروكيمياوية

View details