Theoretical Study of the Effect of the Diffusion Length of Electron on the Efficiency of the Single Crystal Silicon Solar Cell
AuthorsFalah Hassoon Oraibi, Falah Hassoon Oraibi
JournalJournal of University of Babylon, Pure and Applied Sciences
AbstractThis work includes a theoretical study to the effect of different diffusion lengths of electron on the parameters of the single crystal silicon solar cell.
Different values of diffusion length of electron are used and by using electronic calculator programme in visual basic language. The results show increasing the parameters of single crystal silicon solar cell with increasing the diffusion length of electron and consequently calculating the theoretical efficiency of the cell, which varied between (13.352 - 30.076) %.
The relationship between values of the diffusion length of electron and the input parameters in calculating the cell efficiency has been drawing and then drawing the relationship between these diffusion lengths and the theoretical efficiency of this cell as well as noticing effect of other parameters on that efficiency and important notes and conclusions is achieved which can be summarized in two features:
Firstly: Improving the diffusion lengths in both the top surface and the back surface would reduce losses due to bulk and surface recombination velocities at the front and back surface and bring measured photocurrents closer to the idealized values.
Secondly: Using a base layer of a thickness smaller than the minority carrier diffusion length, which improve the collection efficiency of the solar cell.
Keywords: Solar Cell, Silicon, Crystalline, Diffusion length, Efficiency.
Effect of gamma ray on the silicon solar cell parameters
AuthorsFaiz Salih Abbas, F.H. Oraibi
Ali Abid Abojassim
JournalTransylvanian Review
AbstractIn this work, solar cell sample was exposed to a (_^137)Cs gamma ray source. The current - voltage characteristics of a mono-crystalline silicon solar cell were investigated before and after the irradiation with gamma source. The resulted data demonstrated basic solar cell parameters which include I_sc,〖 V〗_oc, FF& η has clearly changed when the gamma ray exposure increased from 0 - 4 days. Magnitudes of the parameters ( I_sc, V_oc, & η ) inversely proportional with γ-ray exposure. This would indicate that high gamma ray exposure would induce certain defects. A decline in the silicon solar cell parameters after gamma irradiation was seen; this is strongly supported by marked decrease in the minority carriers lifetime as exposure time to radiation increases .
Theoretical Study of the effect of impurity concentrations on the efficiency of the single crystal silicon solar cell
AuthorsFalah H. Oraibi, Faeq A.AL-Tememe
JournalJOURNAL OF KUFA- PHYSICS
AbstractEffect of different impurity concentrations that is added during the single crystal silicon solar cell manufacturing on the efficiency of cell has been studied and calculating the theoretical efficiency of the cell ( by using the electronic computer programme in visual basic language ), which varied between ( 0.007-3.827) % .
The relationship between the impurity concentration and the input parameters in calculating the cell efficiency has been plotted and then plotted the relationship between these concentrations and the theoretical efficiency of this cell as well as noticing effect of other parameters on that efficiency and important notes and conclusions is achieved .
Calculation of the potential energy surface and the reduced of electric transition probability of Yb170-176 Isotopes by the Model(IBM-1)
AuthorsFaeq A .AL-Tememe, Flah H. Arabae
JournalJOURNAL OF KUFA – PHYSICS
AbstractIn this paper Yb170-176 even isotopes have been studies by the interacting boson model (IBM-1) to determine the nucleus shape by studying the surface potential energy using the equations of Hamilton function . In addition, the program IBMT-1 was used for evaluating the reduced transition probability B(E2). The obtained results for 170-176 Yb were reasonably in good agreement with the previous experimental and theoretical values . According to the IBM , It was found that these isotopes belong to the rotational region SU(3).
Preparation and studying the electrical characteristics of (PS-PMMA-BaTiO3)
nanocomposites for piezoelectric applications
AuthorsFalah H. Oraibi, Raheem G. Kadhim
JournalElsevier Ltd.
AbstractThe preparation of (PS-PMMA-BaTiO3) nanocomposites for piezoelectric applications has been investigated.
Barium titanate nanoparticles were added to a polymer blend of (PS-PMMA) at various concentrations
(3, 6, 9 and 12) weight percent. We investigated structural, and ac electrical characteristics of (PSPMMA-
BaTiO3) nanocomposites. Results indicate as frequency of the (PS-PMMA-BaTiO3) nanocomposites
increases, dielectric constant & dielectric loss decreases. Conductivity of ac current increase with frequency.
At increasing BaTiO3 NPs concentration, dielectric constant, dielectric loss & ac conductivity
for (PS-PMMA) polymer blend increases. Application of piezoelectric demonstrated decreasing (PSPMMA-
BaTiO3) nanocomposites resistance as increasing the pressure.
Influence of barium titanate nanoparticles on the optical properties of
(PS-PMMA) blend
AuthorsFalah H. Oraibi, Raheem G. Kadhim
JournalElsevier Ltd.
Date2022-06-02
AbstractWe investigated the influence of barium titanate NPs on the optical characteristics of a (polystyrene-poly
methyl methacrylate) blend. The solution casting technique is used to prepare (PS-PMMA) polymer blend
and (PS-PMMA-BaTiO3) nanocomposites. The results indicate that as barium titanate concentrations
increase, the absorbance of nanocomposites increases. The optical characteristics of (PS-PMMA-BaTiO3)
nanocomposites (Coefficient of absorption, Coefficient of extinction, Index of refraction, Dielectric constant’s
real and imaginary components) increase as barium titanate NPs concentration increases. Gap
of the energy narrows as the concentration of barium titanate nanoparticles increases.