ANALYTICAL AND NUMERICAL STUDY OF TUBE DRAWING THROUGH A CONICAL DIE
الباحث الأول:
Sarah Abdul kadhim
الباحثين الآخرين:
Alaa Mohammed Hussein Al-Jassani
المجلة:
Kufa Journal of Engineering
تاريخ النشر:
None
مختصر البحث:
Tube drawing are one of the most important forming processes manufacturing whole board. This process suffers from many problems regarding the deformation behavior of the tube material, as there is no control on the inner radius, i.e. wall thickening…
Tube drawing are one of the most important forming processes manufacturing whole board. This process suffers from many problems regarding the deformation behavior of the tube material, as there is no control on the inner radius, i.e. wall thickening and failure at the end. This research involved implementing analytical and numerical simulation to investigate the ability of the tube to resist the failure under applied forces. The mathematical analysis was performed using Tresca yield criterion and the basis of force equilibrium to a representative element in the deformation zone, as it being drawn into the die under quasi-static equilibrium. Explicit dynamic analysis to the tube drawing process was performed using ANSYS 19.2 Workbench program. The analytical solution was used to validate the finite element results obtained from ANSYS program. Two types of material used in this analysis. The die material is made by 304 stainless steel. However, AL2024T351 was selected as tube material. The developed longitudinal stress and the thickness strain from drawing process of the tube through conical die are studied. Investigated parameters that can affect the deformation behavior are taken into account. Such as, the die semi-angle (
