University of Kufa
السيرة الذاتية - محمد الشكري

محمد جاسم صالح الشكري

اللقب العلمي: أستاذ مساعد

الكلية: الهندسة

القسم: الميكانيك

الصورة الشخصية (صغيرة)

الملف الشخصي

تدريسي حاصل على شهادة البكالوريوس من جامعة الكوفة / قسم الميكانيك للعام الدراسي 2005-2006
حاصل على شهادة الماجستير في علوم الهندسة الميكانيكية/حراريات من الجامعة التكنولوجية / قسم هندسة المكائن والمعدات - تشرين الثاني 2012

عرض المزيد

البحوث المنشورة

Optimizing the performance of the air conditioning system using an innovative heat pipe heat exchanger

الباحث الأول: Adel A.Eidan
الباحثين الآخرين: Mohammed J.Alshukri, Mohamed Al-fahham, Assaad AlSahlani, Dhurgham M.Abdulridha
المجلة: Case Studies in Thermal Engineering
تاريخ النشر: None
مختصر البحث:
This paper presents an experimental investigation to verify the thermal performance of a window-type air-conditioning system equipped with an innovative type of heat-pipe heat exchanger (HPHE). As the use of this type of heat exchanger leads to a re…

Design and Simulation Studies of Hybrid Power Systems Based on Photovoltaic, Wind, Electrolyzer, and PEM Fuel Cells

الباحث الأول: Hussein A.Z. AL-bonsrulah
الباحثين الآخرين: ,Mohammed J. Alshukri ,Lama M. Mikhaeel ,Noor N. AL-sawaf ,Kefif Nesrine ,M.V. Reddy and Karim Zaghib
المجلة: Energies
تاريخ النشر: None
مختصر البحث:
In recent years, the need to reduce environmental impacts and increase flexibility in the energy sector has led to increased penetration of renewable energy sources and the shift from concentrated to decentralized generation. A fuel cell is an inst…

Thermal performance of heat pipe evacuated tube solar collector integrated with different types of phase change materials at various location

الباحث الأول: Mohammed J.Alshukri
الباحثين الآخرين: Adel A.Eidan, Saleh Ismail Najim
المجلة: Renewable Energy
تاريخ النشر: None
مختصر البحث:
This paper presents an experimental investigation of a new method of phase change materials (PCMs) integration in one or both the evacuated tube (ET) and two separated tanks adjacent to the water tank of heat pipe evacuated tube solar water heater c…

Numerical and Theoretical Study of Performance and Mechanical Behavior of PEM-FC Using Innovative Channel Geometrical Configurations

الباحث الأول: Hussein A. Z. AL-bonsrulah
الباحثين الآخرين: Mohammed J. Alshukri ,Ammar I. Alsabery and Ishak Hashim
المجلة: Applied Sciences
تاريخ النشر: None
مختصر البحث:
Proton exchange membrane fuel cell (PEM-FC) aggregation pressure causes extensive strains in cell segments. The compression of each segment takes place through the cell modeling method. In addition, a very heterogeneous compressive load is produced…

The influence of integrated Micro-ZnO and Nano-CuO particles/paraffin wax as a thermal booster on the performance of heat pipe evacuated solar tube collector

الباحث الأول: Mohammed J.Alshukri
الباحثين الآخرين: Adel A.Eidan, Saleh Ismail Najim
المجلة: Journal of Energy Storage
تاريخ النشر: None
مختصر البحث:
The research aims to investigate the possibility of enhancing the functionality of a heat pipe evacuated tube collector (HPETC) with a new method of, one or both an evacuated tube (ET) and two separate storage tanks, incorporating nano or micro-enha…

The effect of vibration pulses on the thermal performance of evacuated tube heat pipe solar collector

الباحث الأول: Sarah H. Ali
الباحثين الآخرين: Adel A. Eidan, Assaad Al Sahlani, M.J. Alshukri, Ahmad Q. Ahmad‡
المجلة: JMERD
تاريخ النشر: None
مختصر البحث:
An experimental research has been performed to investigate and elicit a heat pipe evacuated tube solar collector (HPET-SC) that subjected to mechanical vibration. The voltage ranges used to generate vibration frequency are 6, 8, 1…

Improving Heat Transfer by Employing Fin Array of Various Innovative Shapes in Natural Convection

الباحث الأول: M.J.Alshukri
الباحثين الآخرين: N. A. Madlool, Nasr A. Jabbar
المجلة: IJMME-IJENS
تاريخ النشر: None
مختصر البحث:
This study is a numerical study. It investigates the steady state flow of fluid by natural convection in three dimensions as well as the transfer of heat for a set of innovative shapes of fin array. This study utilized four different shapes of fin a…

Numerical Investigation of New Cooling Method for Clinker Flow in Parallel with Air flow at Different Height Ratios

الباحث الأول: Nasr A. Jabbar
الباحثين الآخرين: M.J. ALshukri, Wakkas Ali Rasheed, Ihsan Y. Hussain
المجلة: IJMME-IJENS
تاريخ النشر: None
مختصر البحث:
The properties of Portland cement depend on several parameters, and the cooling method is one of these parameters. When the effectiveness of cooling method increases, the properties of Portland cement are enhanced. In the present work, a new cooling…

المحاضرات