University of Kufa
السيرة الذاتية - ايمان الشيباني

ايمان جابر عبد الشيباني

اللقب العلمي: أستاذ

الكلية: الهندسة

القسم: المواد

الصورة الشخصية الافتراضية

الملف الشخصي

الشهادات العلمية :
1- البكالوريوس: الجامعة التكنولوجية / بغداد - 1991
2- الماجستير: الجامعة التكنولوجية / بغداد – 2000
3- الدكتوراه : الجامعة التكنولوجية / بغداد – 2007
الترقيات العلمية :
م.مهندس 23/12/1991
مدرس مدرس 2000
مدرس 14 /4 / 2007
استاد مساعد 2015
التدريـــــس
1- تدريس مادة مبادى عمليات التصنيع للمرحلة الاولى في قسم الهندسة الميكانيكية/ كلية الهندسة 2000 ولغاية 2003.
2- تدريس مادة هندسة المعادن للمرحلة الثانية في قسم الهندسة الميكانيكية /كلية …

عرض المزيد

الاهتمامات البحثية

  • توصيف البنيه المجهرية والخواص الميكانيكية للوصلات الغير متشابهة فولاذ مع سبائك الالمنيوم التراكبية الملحومة باللحام النقطي
  • توصيف البنيه المجهرية والخواص الميكانيكية للوصلات الغير متشابهة فولاذ مع سبائك الالمنيوم التراكبية الملحومة باللحام النقطي

البحوث المنشورة

MANUFACTURE AND PERFORMANCE OF GAS FURNACE

الباحث الأول: Dr.EMAN J. ABED
المجلة: International Journal Metallurgical & Materials(IJMMSE)
تاريخ النشر: None
مختصر البحث:
This research is centered on the manufacturing of a gas furnace using locally sourced materials.The manufacturing philosophy is to eliminate the use of heating elements requiring electric power which is poorly supplied in the country. Design drawin…

Investigation Wear Behaviour of Tin Bronze Alloy Prepared by Different Casting Techniques

الباحث الأول: Asst.Prof.Dr.Iman Jabber Abed
الباحثين الآخرين: Asst.Prof.Dr.Iman Jabber Abed Hawraa abdulhussaien kadhim
المجلة: IOP Conference Series: Materials Science and Engineering
تاريخ النشر: None
مختصر البحث:
The cement industry is one of the essential industries in Iraq that has taken a wide range of attention in many applied fields, but this industry faces some technical and engineering problems. One of these problems may cause consumption sliding bear…

Bioactivity of CaSiO3 and Porecalin-CaSiO3 composites prepared by Sol-Gel method for dental applications

الباحث الأول: Asawer Mohsen Hamza
الباحثين الآخرين: Asawer Mohsen Hamza, Eman Jabber Abed Alshaibani, R Rajaa Abbas
المجلة: IOP Conference Series: Materials Science and Engineering
تاريخ النشر: None
مختصر البحث:
In this study, the bioactivity of CaSiO3 and Porecalin-CaSiO3 composites have been investigated utilizing X-ray diffraction (XRD) and scanning electron microscopy-Energy-dispersive X-ray spectroscopy (SEM-EDS). CaSiO3 and P-CaSiO3 are prepared by So…

Tribological behaviour of tin bronze alloys produced by different casting techniques

الباحث الأول: Asst.Prof .Dr.Iman Jabber Abed
الباحثين الآخرين: Asst.Prof .Dr.Iman Jabber Abed, Hawraa Abdulhussaien Kadhim
المجلة: AIP Conference Proceedings
تاريخ النشر: None
مختصر البحث:
In this study the hardness and wear resistance behaviour of tin bronze alloys produced by die and sand mould casting were investigated. The alloying element (Sb) was added with percentage of (3,5 and 8) wt. % to tin bronze alloys. The wear tests we…

[PDF] from uokufa.edu.iq CHARACTERISTICS OF HOOK AND INTERMIXING LAYER OF FRICTION STIR SPOT WELDING AA5052/C10100 JOINTS REINFORCED BY ZNO NANO-PARTICLES

الباحث الأول: Asst.Prof.Dr.Iman J. AlShaibani
الباحثين الآخرين: Asst.Prof.Dr.Iman J. AlShaibani and Mohammed K. Aljanabi
المجلة: University of Kufa /College of Engineering
تاريخ النشر: None
مختصر البحث:
FSSW is a solid state joining method gained its significance as an alternate welding technique in the in electrical, electronic and automobile industries that used FSW welding. FSSW can be used to welding dissimilar joints of material with variation…

Effect Bur Velocity on Fracture Surface, Roughness and Morphology of Zirconia Crown and Bridge by Computer Aided Design and Manufacturing (CAD/CAM)

الباحث الأول: Asst.Prof.Dr.Iman Abed, Duha Bassim
الباحثين الآخرين: Asst.Prof.Dr.Iman Abed, Duha Bassim
المجلة: EasyChair
تاريخ النشر: None
مختصر البحث:
The Y-TZP has been used in dentistry such as crowns, fixed partial dentures, implants, abutments, and brackets. This paper studied effect cutting speed of bur on fracture surface, roughness and morphology of crowns made of different brands of’yttria…

Preparation and characterization of yttria stabilized zirconia Blocks from waste dental implant by computer-aided manufacturing (CAM)

الباحث الأول: Asst. Prof. Dr. Iman Jabber Abed
الباحثين الآخرين: Asst. Prof. Dr. Iman Jabber Abed Noor Hashim
المجلة: Publisher:Med well journals
تاريخ النشر: None
مختصر البحث:
The preparation of zirconia waste powder by sieving the powder, milling and after that characterization of the zirconia recycled zirconia powder by the particle size analyses, XRD and SEM. Then preparation of the presintered yttria-tetragonal polycr…

Effect of Adding Nano Alumina on the Grain Size and the Mechanical Properties of Yttria-Stabilized Tetragonal Zirconia Polycrystals (Y-TZP)

الباحث الأول: Asst. Prof. Dr. Iman Jabber Abed
الباحثين الآخرين: Asst.Prof.Dr. Mohammed Talib Alkhafagy Othman Abed Al-Hussein Al-Badry
المجلة: International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS
تاريخ النشر: None
مختصر البحث:
In the current study, the effect of adding nano Al2O3 to 3 mol%Y2O3 stabilized tetragonal zirconia (3Y-TZP) prepared by precipitation method on the grain size and the mechanical properties was investigated. Different amount of nano Al2O3 (1.5 wt. % …

STUDY OF TIN ADDING ON DRY SLIDING WEAR PROPERTIES OF ALUMINUM ALLOYS

الباحث الأول: Dr. EMAN J. ABED
الباحثين الآخرين: Dr.MOHAMMED J. KADIM
المجلة: International Journal Metallurgical & Materials Science and Engineering (IJMMSE)
تاريخ النشر: None
مختصر البحث:
The aim of the present research is to study the effect tin content on wear rate of Al alloys. Mechanism wear behavior was studied by (pin on disc) technique under different conditions of applied loads(100-2500)g, constant sliding speed and time, st…

Study of Solidification and Mechanical Properties of Al-Sn Casting Alloys

الباحث الأول: Dr.Eman J. Abed
الباحثين الآخرين: -
المجلة: Asian Transactions on Engineering (ATE ISSN: 2221-4267) Volume 02 Issue 03
تاريخ النشر: None
مختصر البحث:
Al-Sn alloys have a very long history to be used as bearing materials. These alloys provide a good combination of strength and surface properties. This study aimed to investigate solidification and mechanical behavior of Al-Sn alloy against both the…

The influence of different casting method on solidification time and mechanical properties of AL-Sn castings

الباحث الأول: Dr.Eman J. Abed
الباحثين الآخرين: -
المجلة: International Journal of Engineering & Technology IJET-IJENS
تاريخ النشر: None
مختصر البحث:
Solidification time is one of the very important parameters used for assessing the properties of the material. Aluminum casting alloys with tin as the major alloying elements are the most important commercial casting alloys because of their superior…

SIMULATION OF COLD DIE COMPACTION ALUMINA POWDER

الباحث الأول: K. Mohammed Jasim Kadhim *
الباحثين الآخرين: , Iman J. Abed, Adil A. Alwan
المجلة: STM Journals
تاريخ النشر: None
مختصر البحث:
Compaction process was analyzed mathematically by predicting a steady-state mathematical model in order to give more description and understanding for the mechanism of this process. Numerical investigation has been carried out on axisymmetric cylin…

Rapidly Solidified of Hyper Eutectic Aluminum - Silicon Alloys Ribbons by Using Melt-Spinning Techniques

الباحث الأول: Dr.Eman J. Abed
الباحثين الآخرين: -
المجلة: International Journal of Current Engineering and Technology,
تاريخ النشر: None
مختصر البحث:
The Al-Si alloys used in this investigation was prepared at the University of Kufa in the Metallurgy Laboratory. Heyper eutectic Al-Si alloys with compositions 15, 17, 19 wt% Si was quenched from the liquid state by using melt-spinning techniques. T…

Study Microstructure And Mechanical Properties Of Rapidly Solidified Of Al-Sn By Melt Spinning Technique

الباحث الأول: Dr. Eman J. Abed
المجلة: International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS
تاريخ النشر: None
مختصر البحث:
The melt spinning technique has been used in this study to produce rapidly solidified alloys in the simple binary Al-Sn alloys.Aluminum-5,15 and 25%Sn were prepared by as cast and melt spun technique. Optical microcopy,X-rays diffraction analysis an…

المحاضرات

الأخبار والإعلانات

مناقشة رسالة ماجستير

النوع: الأخبار
التاريخ: 26 أكتوبر، 2021
التفاصيل:
يوم الخميس الموافق 4/11/2021 في قاعة هندسة المواد الساعة التاسعة صباحا في قاعة قسم هندسة المواد

المشاركه بمؤتمر جامعه طهران

النوع: الأخبار
التاريخ: 28 أكتوبر، 2021
التفاصيل:
الخصائص الهيكلية والفيزيائية لمركب PMMA / SiO2 النانوي لتطبيقات طب الأسنان تم دراسة ومقارنة تاثير اضافة دقائق السيلكا النانوية المحضرة بطريقة الحرق لقشور الرز ( RICH HUSK ) ومقارنتها مع دقائق السيلكا الصناعية كمواد مضافة الى بوليمر PMMA حيث تم دراسة حيود الاشعة السينية XRD ودارسة الخواص الط…