University of Kufa
السيرة الذاتية - دكتور علي الشمري

دكتور علي عامر عبد الهادي الشمري

اللقب العلمي: أستاذ

الكلية: الهندسة

القسم: الهندسة الكيمياوي

الصورة الشخصية (متوسطة)

الملف الشخصي

1- حاصل على شهادة البكالوريوس(1998) والماجستير (2001)والدكتوراه (2006)في الهندسة الكيمياوية من جامعة بغداد .تخصصي الدقيق ظواهر انتقال
2- عنوان اطروحة الماجستر"تحضير الزيولايت نوع 13x من المواد المتوفرة محليا "
3- لدي براءة اختراع في تصنيع الزيولايت نوع (13x)
4- عنوان اطروحة الدكتوراه "تقليل إعاقة جريان النفط الخام في الأنابيب الناقلة باستعمال مضافات كيمياوية"
5- عضو المكتب الاستشاري
6- مدير المكتب الاستشاري الهندسي 2012-2013
7- معاون العميد للشؤون العلمية والدراسات العليا لغاية 6-9-201…

عرض المزيد

الاهتمامات البحثية

  • انتقال حرارة , كتلة و موائع و تأكل وعوامل مساعدة

البحوث المنشورة

Study the Effect of Coating by TiO2Nano –Particles on Carbon Steel Behavior via Sol – Gel Method

الباحث الأول: Mustafa J.Azeez
الباحثين الآخرين: Ali H. Ataiwi, Ali A.Abdulhadi,Mohammed H.Shine
المجلة: journal of engineering and applied sciences
تاريخ النشر: None
مختصر البحث:
The use of nanoparticles has become very important in many industrial applications for its important role in improving all the properties including thermal, electrical, mechanical and chemical in the different environments. In this paper, TiO2 nanop…

Study the heat treatment effect on the TiO2 nano-particles prepared by sol-gel process

الباحث الأول: Dina Y Mahdi
الباحثين الآخرين: Ali A Abdulhadi, Ali H Ataiwi
المجلة: International Journal of Energy and Environment
تاريخ النشر: None
مختصر البحث:
In this paper, titanium dioxide (TiO2) nano-particles were synthesized by the sol-gel method by using Titanium tetrachloride (TiCl4) solution as precursor. The effects of calcination temperature were determined. The samples were examined using X-ray…

PMMA-TIO2 NANOCOMPOSITE COATING ON COPPER SUBSTRATE FOR CORROSION PROTECTION.

الباحث الأول: Dina Y. Mahdi1
الباحثين الآخرين: Ali A. Abdulhadi and Ali H. Ataiwi
المجلة: international journal of advanced research
تاريخ النشر: None
مختصر البحث:
The main aim of this work is to enhance the surface protection of copper substrate from corrosion, by dipping process in nanocomposite PMMA-TiO2. Dipping method at constant dipping speed is applied to produce nanocomposite coat on copper subst…

Studying the Effect of Eco-addition Inhibitors on Corrosion Resistance of Reinforced Concrete

الباحث الأول: Ali Amer A. Hadi
الباحثين الآخرين: Shaymaa Abbas Abdulsada, Ali I. Al-MosawI
المجلة: Bioprocess Engineering
تاريخ النشر: None
مختصر البحث:
Due to the high cost of repair of damaged constructions, some preventive measures, namely using, for example, rice husks as corrosion inhibitor admixtures were chosen as a prospective preventive technique. Along this approach, laboratory concrete sa…

Waste Plants as a Green Inhibitor for Reinforced Concrete

الباحث الأول: Shaymaa Abbas Abdulsada
الباحثين الآخرين: Ali I Al-Mosawi, Ali Amer A Hadi, Karrar Saad, Hassanein Samir
المجلة: Recent Trends in Civil Engineering & Technology
تاريخ النشر: None
مختصر البحث:
In recent years, the use of inhibitors in producing high performance concrete has increased significantly as a result of chloride and sulfate attacks. The present inhibitors in market are toxic to the environment. Hence, the objective of the present…

Nanoparticles concentration and environmental effects on cogeneration system in cement industry

الباحث الأول: Ali Amer A. Hadi
المجلة: International Journal of Engineering Research and General Science ISSN 2091-2730
تاريخ النشر: None
مختصر البحث:
Cement production considers one of the most intensiveenergy consumingand largest carbon emitting industrial sectorsaccording to very high temperature required to produce cement clinker. This paperhighlights the importance of the waste heat recovery …

Use Reed Leaves as a Natural Inhibitor to Reduce the Corrosion of Low Carbon Steel

الباحث الأول: Ali Amer A. Hadi
المجلة: International Journal of Engineering Research and General Science
تاريخ النشر: None
مختصر البحث:
Carbon steel, the most widely used engineering material, despite its relatively limited corrosion resistance used in large tonnages in marine applications, nuclear power transportation, chemical processing, petroleum production and refining, pipelin…

Enhancement of waste heat recovery by using Cu nanoparticles in cement industries

الباحث الأول: N.A. Madlool
الباحثين الآخرين: Ali Amer A. Hadi
المجلة: International Scientific Journal – Environmental Science
تاريخ النشر: None
مختصر البحث:
Waste heat sources in the cement plant comprise the exit gases from the pre-heater and the ejection hot air from clinker cooler. And for cogeneration power, these sources which have diverse level of temperature can be used separately or in c…

Performance of polyacrylamide as drag reduction polymer of crude petroleum flow

الباحث الأول: Anees A.Khadoma
الباحثين الآخرين: Ali A.AbdulHadi
المجلة: Ain Shams Engineering Journal
تاريخ النشر: None
مختصر البحث:
The influence of polyacrylamide (PAM) as drag reducing polymer on flow of Iraqi crude oil in pipe lines was investigated in the present work. The effect additive concentration, pipe diameter, solution flow rate and the presence of radius elbows on t…

Kinetic and mathematical approaches to the corrosion of mild steel in nitric acid

الباحث الأول: Anees A Khadom
الباحثين الآخرين: Ali A Abdul-Hadi
المجلة: Reaction Kinetics, Mechanisms and Catalysis
تاريخ النشر: None
مختصر البحث:
The effect of different temperatures and acid concentrations on the corrosion of mild steel in nitric acid are addressed in this work. The effect of temperature is explained by the application of the Arrhenius equation and transition state theory, w…

Studying the Effect of Some Surfactants on Drag Reduction of Crude Oil Flow

الباحث الأول: Ali A.Abdulhadi
الباحثين الآخرين: Anees A Khadom
المجلة: Chinese Journal of Engineering
تاريخ النشر: None
مختصر البحث:
The influence of SDBS, SLS, SLES, and SS as drag reducing agents on flow of Iraqi crude oil in pipelines was investigated in the present work. The effect of additive type, additive concentration, pipe diameter, solution flow rate, and the presence o…

Preparation of Zeolite Type 13X from Locally Available Raw Materials

الباحث الأول: Jalil .R. Ugal
الباحثين الآخرين: Malik Mustafa, Ali.A. Abdulhadi
المجلة: Iraqi Journal of Chemical and Petroleum Engineering
تاريخ النشر: None
مختصر البحث:
The aim of this work was to prepare zeolite type 13X from locally available kaolin and to study the effects of using some binding materials through the process of agglomeration of this zeolite. This study was focused on using kaolin binder in differ…

Drag Reduction of Crude Oil Flow in Pipelines Using Sodium Dodecyl Benzene Sulfonate Surfactant

الباحث الأول: G. A. R. Rassoul
الباحثين الآخرين: Ali A. A. Hadi
المجلة: Iraqi Journal of Chemical and Petroleum Engineering
تاريخ النشر: None
مختصر البحث:
n the present work, a closed loop circulation system consist of three testing sections was designed and constructed. The testing sections made from (3m) of commercial carbon steel pipe of diameters (5.08, 2.54 and 1.91 cm). Anionic surfactant (SDBS)…

المحاضرات

General Knowledge of Chemical Engineering مبادى هندسة كيمياوية 1

General Knowledge of Chemical Engineering مبادى هندسة كيمياوية 1

Introductory Concepts مبادى هندسة كيمياوية 1

Introductory Concepts مبادى هندسة كيمياوية 1

Introductory Concepts مبادى هندسة كيمياوية 1

Introductory Concepts مبادى هندسة كيمياوية 1