About
Nuclear Instrumentation and Imaging Systems *
Development of a Monte Carlo simulation model for the Mediso AnyScan SPECT system and comparative analysis of different scintillation crystals
Investigation of the effects of dead layers formed in the scintillation crystals of the SPECT system on performance parameters
Optimization of collimator geometry for the Mediso AnyScan SPECT system
Development of a Monte Carlo simulation model for the GE PET Discovery IQ system and production of various phantoms based on NEMA standards
Development of a Monte Carlo simulation model for the HiSens intraoperative gamma probe and its validation using experimental data based on NEMA standards
Nuclear Structure Physics*
Calculation of binding energies, deformation parameters, and nuclear structure properties of isotopes using the RMF model (DD-ME2 and DD-PC1 functionals)
Radiation Physics*
Measurement of natural radioactivity (NORM) activity concentrations in tobacco leaves
Measurement of natural radioactivity (NORM) activity concentrations in soil from oil field areas
Publications
7Re-examination of nuclear structure properties and shape coexistence of nuclei around A∼ 70
We re-examine the nuclear structure properties of waiting point nuclei around A ∼ 70 using the interacting boson model-1 (IBM-1) and the relativistic mean field (RMF) model. Effective density-dependent meson-exchange functional (DD-ME2) and density-dependent point-coupling functional (DD-PC1) were used for the RMF calculations. We calculated the energy levels, the geometric shapes, binding and separation energies of nucleons and quadrupole deformation parameters ( ). The shape co-existence phenomena in A ∼ 70 nuclei (68Se, 70Se, 70Br, 70Kr, 72Kr, 74Kr, 74Rb and 74Sr) was later investigated. Spherical and deformed shapes of the selected waiting point nuclei were computed using the IBM-1 and RMF models, respectively. The proton-neutron quasiparticle random phase approximation (pn-QRPA) model was used to calculate β-decay properties (Gamow-Teller strength distributions, β-decay half-lives and branching ratios) of selected nuclei as a function of . The results revealed a significant variation in calculated half-lives and Gamow-Teller strength distributions as the shape parameter was changed. The computed via DD-ME2 functional resulted in half-lives in best agreement with the measured data.
Intrinsic performance parameters assessment of various scintillation crystals for a SPECT gamma camer
Abstract Intrinsic performance parameters are a part of quality control tests for the Single Photon Emission Tomography (SPECT). These parameters are influenced by the optical and mechanical properties of the detector’s crystal, in addition to other detector components. In this study, intrinsic performance parameters (spatial resolution, energy resolution, and uniformity) tests were performed for both the SPECT scan and SPECT scan simulated model. Furthermore, these tests were also performed on the SPECT scan model simulated with GAGG, , , , and crystals at different thicknesses using Tc isotope for low energy tests and 131I isotope for high energy tests. The MTF (modulation transfer function) results for the SPECT scan simulation model response to resolve small bar pattern better than the experimental value of the SPECT scan. On the other hand, the difference between experiment and simulation values for intrinsic energy resolution at 140.5 keV and 364.5 keV ranges from 0.001% to 0.044% and 0.018% to 0.04%, respectively. The obtained intrinsic uniformity values for all SPECT simulation models and the experiment values for the SPECT scan are within the typical range.
Investigation of the effect of crystal dead layer on system performance in Single Photon Emission Computed Tomography: A Monte Carlo simulation study.
One of the factors affecting image quality in SPECT (Single Photon Emission Computed Tomography) applications is the dead layer that forms over time in the scintillation crystal. In this study, we aimed to investigate the effect of dead layers in the NaI(Tl) scintillation crystal used in SPECT on system performance. The GATE simulation code, which is based on the GEANT4 toolkit and is widely recognized for its application in nuclear imaging simulations, was employed for this investigation. In the first step, the standard SPECT model was simulated, and the SPECT performance parameters (sensitivity, spatial resolution, energy resolution, and contrast) for low 140 keV (for Tc), medium 167 keV (for 201Tl), and high 364 keV (for 131I) gamma energies have been analyzed. Then, various thicknesses of dead layers on the crystal were simulated, and the effect of the dead layer on the performance parameters was evaluated for the same energies. The results indicate a reduction in SPECT sensitivity of approximately 33.5%, 27.1%, and 21.7% for low, medium, and high energies, respectively, as the thickness of the crystal’s dead layer increases from 0.19 mm to 1.52 mm (equivalent to 2% to 16%). Small deteriorations in spatial resolution and energy resolution of the SPECT have been determined for 140 keV, 167 keV, and 364 keV gamma energies. The dead layers slightly influenced the contrast of SPECT. The results of this study show that the image quality assessment parameters of the SPECT system deteriorated as the thickness of the scintillation crystal’s dead layer increased.
Production Cross-Section and Reaction Yield of 76Br for Nat Se (p, xn) 76Br Reaction Channels
Radioisotopes are now widely used in many different fields due to technological advancements. One of these fields is nuclear medicine. Many radioisotopes are used for diagnosis and treatment in nuclear medicine. The suitable physical properties of Br isotopes for imaging in positron emission tomography (PET) have led researchers to study their potential production from different reaction channels. This study aimed to determine the parameters that can serve as a basis for experimental studies: production cross-sections, reaction yields, and total activity. In this context, we investigated some possible proton-induced production mechanisms of Br using level density models. For this purpose, the Constant Temperature Fermi Gas Model (CTFGM), Back Shifted Fermi Gas Model (BSFGM), and Generalised Superfluid Model (GSM) models within the framework of TALYS 1.95 nuclear reaction code have been used for Se(p,xn) Br reaction channels. The calculated production cross-section values up to 60 MeV beam energy are found to agree with the available data in the literature. Furthermore, the reaction yields as a function of beam energy and total activation values as a function of irradiation time have been carried out.
Decay Modes and Half-Life of 265–282Ds Isotopes
The decay modes and half-lives of superheavy 265–282Ds isotopes have been investigated by using Relativistic Mean Field (RMF) model with density-dependent point-coupling and density-dependent meson-exchange functional. The potential energy surfaces as a funtion of deformation parameters ( ) for the considered Ds nuclei have been obtained by using a triaxially deformed RMF model calculations for the investigation of their ground-state shapes and binding energies. The computed ground-state binding energy values of given Ds isotopes have been used for calculations of Q values of the alpha ( ), beta-plus/electron capture ( /EC), beta-minus ( ) and spontaneous fission (SF) decay modes. The dominant decay modes and half-lives of 265–282Ds isotopes have been predicted by using the computed Q-values and some empirical formulas. The results of the present study demonstrate that the 265–282Ds isotopes are well deformed, with prolate configuration in their ground-states. Our estimations for decay modes and half-lives are consistent with available experimental data.
Decay Modes and Half-Life of 265–282Ds Isotopes
Relativistic Mean Field (RMF) theory with density-dependent forces (DD-ME2 and DD-PC1) was utilized to investigate decay modes and half-life of superheavy No isotopes. Triaxially deformed RMF model was used to obtain potential energy surfaces (PESs) of the considered nuclei which is used to determine their ground-state (g.s.) shape. By regarding PES results, axially deformed RMF calculations have been employed to obtain g.s. binding energy (BE) of No nuclei. The calculated g.s. BE values of the nobelium isotopes have been used for the prediction of , /EC, and spontaneous fission (SF) decay modes and half-life of No isotopes. Our results show that the No isotopes are well deformed and their shapes are predicted to be prolate. According to existing experimental data, our estimates for decay modes and half-lives are in agreement.