مواقع التدريسيينجامعة الكوفة
علي محسن حيدر البياتي
أستاذ مساعد

علي محسن حيدر البياتي

English Version
0بحث منشور
0محاضرة
0اهتمام بحثي
0خبر

الملف الشخصي

بكالوريوس في الهندسة/الموارد المائية سنة 2005
ماحستير في الهندسة/الموارد المائية سنة 2010
دكتوراه في الهندسة المدنية / الموارد المائية 2020

الاهتمامات البحثية

1

البحوث المنشورة

9
2021

Estimation of Groundwater Hydraulic Properties inUnconfined Aquifer in Teeb Area, South of Iraq

الباحثونTagreed Hameed Khlif، Ammar Jalil Almosawi Ali Mohsen Hayder
المجلةVol. 9 No. 3 (2021): Advances in Mechanics Published in 1st / July / 2021
مختصر البحث

The evaluating of the hydraulic properties of the aquifer is very important for future forecasting of thequantitative reserves of groundwater and thus optimal management of this important resource. The hydraulicproperties of groundwater are important in determining the velocity of groundwater movement and thestorage and renewable quantities. The most important hydraulic characteristics are the transmissivity (T),hydraulic conductivity (K), stortivity (S) and specific yield (Sy). The hydraulic specifications of aquifer dependon the type of rock formations, if the formations are coarse and well-arranged grains, the hydraulicparameters will be better. The pumping test process is carried out on seven wells for unconfined aquifer inTeeb area. The groundwater levels are recorded for drawdown and recovery for each test then themeasurements are analyzed using AQTESOLV 4.5 program. The validation of pumping test is compared withsome important methods such as specific capacity (Sc) equation and data for General Commission ofGroundwater for Ministry of Water Resources (GCGMWR) which adopted electrical resistivity for the samestudy area. The results obtained for k from pumping test and the specific Capacity equations are showed agood agreement with the data for General Commission of Groundwater for Ministry of Water Resourcesthrough determination coefficient (R ) which is found 98% for all. However, the obtained results fromAQTESOLV 4.5 software reduces the uncertainty of the results adopted by other traditional methods. Thehydraulic properties of eight wells from the specific Capacity equation were estimated. Finally, the hydraulicconductivity (K) can be estimated by using GIS techniques as spatial distribution over study area ranges (2.19-4) m/day in the north-eastern part of the study area, the central zone and southwestern parts which hydraulicconductivity values were starting to increase ranges from 6 to 12(m/day).

2021

Application of Bayesian MCMC Method for Frequency and Uncertainty Analysis of Annual Extreme Flow Series: A Case Study in Tigris River Tributaries, Iraq

الباحثونAli Mohsen Hayder، Hayder Sami Mohammed Tagreed Hameed Khlif
المجلة Vol. 9 No. 3 (2021): Advances in Mechanics Published in 2021-07-23
مختصر البحث

The water resources planning and management and the hydraulic engineering design cannot have accomplished without its dependence on the extreme values of hydrological variables, so the uncertainty calculation of extreme events is important to be adopted. In this paper, the uncertainty and frequency analysis in estimating the annual extreme flow (AEF) series by using Bayesian theory was conducted for three stations in Tigris river tributaries, Iraq. The extreme flow frequency distribution model based on the Generalized Extreme Value (GEV) model is selected and the Markov chain Monte Carlo (MCMC) method based on Metropolis-Hastings algorithm for the generation of random samples by a special sequential process which is applied to evaluate the parameters of the GEV model. Subsequently, the posterior distributions of the AEF quantiles are used in calculations of the point and interval of extreme flow design values for various return periods. Estimations of GEV model parameters values show convergence in the values of the estimated parameters, but the MCMC method with Bayesian theorem gives a superiority for analysis of uncertainties when it has taken into consideration.

2021

Time series analyses for predicting the water quality and river discharge at Al-Kufa river in Iraq

الباحثونAli M Hayder، Hussein A Alikhan1 Ayam J Jihad
المجلةJournal of Physics: Conference Series
مختصر البحث

In this study, raw water samples collected from Al-Kufa River station in Al-Kufa city, Iraq were monitored and tested monthly from 2013 to 2017. Chemical and time series analyses were performed on 13 water quality parameters, the river discharge (Q), and water surface elevation (WSE). These water quality parameters were the magnesium (Mg), calcium (Ca), potassium (K), sodium (Na), chloride (Cl-), nitrate (NO3-), phosphate ([PO4]3-), dissolved oxygen (DO), electrical conductivity (EC), pH, water temperature (Temp), total dissolved solids (TDS), and total hardness (TH). Regression was used to examine the relationships between the concentrations of the assayed water quality parameters and river discharge. The theoretical models best-fitted with the assayed parameters were evaluated by two tests, the Kolmogorov⁃Smirnov (K⁃S) test and the chi-squared (χ2) test. The relation between the concentrations of the assayed parameters and river discharge was moderate (r-value is between 0.5-0.95) for the parameters EC, TDS, Ca, Cl, Na, and WSE while weaker correlation resul for the other parameters (r<0.5). Equations with second order provided a superior characterization for most of the parameters for which trends were detected, and the river discharge was the unique parameter showing an upward trend based on the nonparametric Spearman's criterion. Together, the time series analyses and trend detection would help to forecast the safety of water at Al-Kufa station for human consumption.

2021

Modelling the IDF curves using the temporal stochastic disaggregation BLRP model for precipitation data in Najaf City

الباحثونAli Mohsen Hayder، Mustafa Al-Mukhtar
المجلةArabian Journal of Geosciences volume 14, Article number: 1957 (2021) . Published in 7/9/2021
مختصر البحث

Precipitation data for long period with short time scales extending from limited minute to daily time steps is the principal requirement in water resources engineering for planning, design, and operation of water resources projects. However, the availability of measurements of these data faced several obstacles in various places in the world. In this study, the Intensity Duration Frequency (IDF) relationships of precipitation amount at Najaf city region in Iraq are generated based on a stochastic technique for disaggregation of daily time scale precipitation into fine-scale durations, i.e. the modified Bartlett-Lewis rectangular pulses of the seven parameters (BLRP) model (λ, κ, φ, α, υ, μχ, and σχ). The model applied for daily precipitation over a period of 35 years by employing the Climate Forecast System Reanalysis (CFSR) grid station data after implementing bias correction with respect to the monthly available data at Najaf city meteorological station. Eight sub-daily precipitation data sets with storm durations of 5, 10, 20, 30, 60, 120, 360, and 720 min were generated by using Hyetos-Minute R-package. Three statistical continuous distributions used to fit the estimation of extreme values data sets which included the Generalised Extreme Value (GEV), Gumbel (EV-1), and Log-Pearson type III (LP-3). Finally, the IDF curves were generated based on GEV and LP-3 for six return periods (2, 5, 10, 25, 50, and 100 years) using Sherman equation for each return period. The goodness of fit between the theoretical and developed distributions was tested by applying the Kolmogorov–Smirnov, Anderson–Darling and chi-squared test at 5% significance level. Results showed affirmative agreements between the both datasets from the three distributions at 5% significance level. Furtherly, the probabilistic model selection by two numerical criteria AIC and BIC nominated that GEV and LP-3 as appropriate models for simulation extreme precipitation values at Najaf city for different return periods.

2020

Hydrological Model for Derbendi-Khan Dam Reservoir Watershed Using SWAT Model

الباحثونThair Khayyun، Imzahim Abdulkareem Alwan Ali Mohsen Hayder
المجلةEngineering and Technology Journal
مختصر البحث

In this study, the watershed’s runoff of Derbendi-Khan dam reservoir within the upper part of Diyala River reach the northeast of Iraq was modeled by Soil Water Assessment Tool (SWAT). The model calibration and validation were based on monthly measured inflow to the dam reservoir. They extended for a period between 1979 and 2008 with a warm-up period of two years, twenty-year for calibration, and eight-year for validation. Sequential Uncertainty Fitting version 2 (SUFI2) automatic calibration algorithm method used for model calibration and sensitivity analysis. Results demonstrate that the model performance for the studied watershed which is evaluated, with many statistical criteria, was very good. The sensitivity analysis pointed parameters (CH_K2, CN2 ALPHA_BF, SFTMP, SOL_AWC, and CH_N2) are the most useful parameters on runoff calibration for the studied watershed. Moreover, it was found that the average annual areal snowmelt ratio to the average annual areal precipitation during the simulation period is approximately 24%.

2020

Selection of Suitable Precipitation CMIP-5 Sets of GCMs for Iraq Using a Symmetrical Uncertainty Filter

الباحثونThair S Khayyun، Imzahim A Alwan Ali M Hayder
المجلةIOP Conference Series: Materials Science and Engineering
مختصر البحث

Abstract https://iopscience.iop.org/article/10.1088/1757-899X/671/1/012013

2019

Hydrological model for Hemren dam reservoir catchment area at the middle River Diyala reach in Iraq using ArcSWAT model

الباحثونThair Sharif Khayyun، Imzahim Abdulkareem Alwan  Ali Mohsen Hayder 
المجلةApplied Water Science
مختصر البحث

In this study, the catchment area’s runol of Hemren dam reservoir within middle River Diyala reach beyond DerbendiKhan dam at the northeast of Iraq is simulated using the Soil Water Assessment Tool (ArcSWAT-2012) model integrated  with remote sensing and geographical information systems. The model was calibrated in monthly time step for the period  extended from 1981 to 2000 with 2fyears of warm-up period and validated with observed stream iow for years between 2001  and 2008. The model calibration and parameters sensitivity analysis were conducted using automatic calibration method  within the SWAT-CUP program. The model performance for the studied catchment area was evaluated with many statistical criteria. In general, the performance of the model was good. Results of sensitivity analysis showed that there are seven  parameters that mostly elect on the hydrological processes in the studied catchment; these were ALPHA_BF, CH_K2, CN2,  CH_N2, SOL_AWC, REVAPMN, and GW_REVAP. Results showed that an elective runol happens at wet seasons, and  there is not continuous elective base iow from the studied catchment, and the average annual iniow volume to Hemren dam  reservoir during the simulation period was 0.871 BCM, i.e., 17.42% of the overall iniow volume to Hemren dam reservoir.  Furthermore, it was founded that the use of climate forecast system reanalysis of global weather station data is possible  in the studied catchment area. Finally, a simple direct regression formula is determined by correlating the monthly runol  volume with monthly rainfall depth.

2017

A Laboratory Study on Stilling Basin with Semicircular Rough Bed Elements

الباحثونAli Mohsen Hayder
المجلةThe Jordan Journal of Civil Engineering (JJCE) Volume 11, No.2 (2017)
مختصر البحث

In this research, a laboratory study of hydraulic jump properties was conducted by making small semicircular rough elements, which covered the stilling basin floor downstream of spillway. The objective of this research was to introduce and make a comparison of roughed bed hydraulic jump stilling basin by using semicircular rough elements. To reach such an idea, a new expression was first developed for sequent depth and hydraulic jump length. Then, hydraulic jumps were conducted on a bed of prismatic roughness elements in a rectangular flume in order to investigate the jump effect on the characteristics of stilling basin. The rough elements are positioned on the bed of the flume downstream of an Ogee spillway in such a way that the incoming water jet is just skimming above the elements’ top surface. Each rough element shape was tested under different Froude numbers, ranging from 4 to 11. In each test, the water surface profile, the roller length and the jump length were measured. The experimental results showed that the presence of a rough element increases the shear force and consequently reduces the jump length and the sequent depth of flow. Comparison of the results with those of previous studies showed that using beds roughed with semicircular shaped elements can decrease the length of the stilling basin by 56% of any regular basin and the sequent depth of the jump by 25% of a comparable one occurring on a smooth bed. Also, the average value of energy dissipation was computed and found to range between 68.1% and 60.4% of stilling basin of type I developed by Peterka (1978).

2015

Investigation of Energy Dissipation in Stepped Spillway with Semicircular Steps Treads

الباحثونAli Mohsen Hayder ، Muthanna Sadiq Jafar
المجلةAsian Transactions on Engineering
مختصر البحث

Abstract: The construction of spillway with steps represents an efficient technique to decrease the energy of water that flows over it. Steps shape, or geometry of the spillway, has a significant effect on the residual energy at the toe of the spillway. In this study, a traditional stepped spillway model designed with six steps of 5cm height, 5cm length, and 30cm width. The stepped spillway model modified twice by curving the horizontal treads using sectors of PVC pipe with 7.5cm diameter. The first modification done by curving the treads up to make convex treads with height of 1.1cm and the second modification was done by curving the treads down to make-concaved treads with depth of 1.1cm. Eleven tests carried out for the three cases with flow rates varied from 0.64l/s to 24.95l/s. The experimental results showed that the discharge affected reversely on the energy dissipation, and the concaved treads case produced higher dissipation than the horizontal and the convex cases. The energy dissipation for concaved treads case ranged from 48.84 to 87.82%, 41.38 to 84.08% for convex treads case and 34.93 to 78.23% for horizontal treads case. In addition, the total energy dissipation produced by the spillway and hydraulic jump together, for concaved treads case ranged from 62.51 to 94.38%, convex treads case from 60.74 to 93.81%, and horizontal treads from 59.64 to 93.25%. The other relation that noted were the decrease of Froude number at the toe, with the increase of flow rate, and concaved treads case produced lower values of Fr than the other two cases. In addition, the values of y2/y1, conjugate depths of the hydraulic jump, decreased with the increase of flow rates, and concaved treads case produced lower values of y2/y1 than the other two cases.

المحاضرات

9

الأخبار والإعلانات

1
الأخبار 2022-06-26

تقييم ورقة بحثية

تدريسي من كلية الهندسة جامعة الكوفة مقوما علميا لأحدى دور النشر العالمية اختير التدريسي من قسم هندسة المنشآت والموارد المائية بكلية الهندسة جامعة الكوفة الاستاذ المساعد الدكتور علي محسن حيدر مقوما علميا للمجلة العلمية العالمية (Irrigation and Drainage )، والمندرجة ضمن مستوعبات سكوباس في الربع الثاني (Q2) ، والتي تعتبر من المجلات العالمية الرصينة التابعة لدار النشر Wiley-Blackwell . عنوان البحث : "Experimental Study on Hydraulic Properties of Rough Strip Energy Dissipator in Curved Spillway"

عرض التفاصيل